Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-08-24 01:26:37
From: khellman
Description: FreeBSD/amd64 on Dell Inc. Precision WorkStation T3500
---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-RELEASE-p9 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU W3505 @ 2.53GHz (2533.43-MHz K8-class CPU) Origin="GenuineIntel" Id=0x106a5 Family=0x6 Model=0x1a Stepping=5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID TSC: P-state invariant, performance statistics real memory = 25769803776 (24576 MB) avail memory = 25105608704 (23942 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <DELL B10K > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20250807/tbfadt-743) ioapic0: MADT APIC ID 8 != hw id 0 ioapic1: MADT APIC ID 9 != hw id 0 ioapic0 <Version 2.0> irqs 0-23 ioapic1 <Version 2.0> irqs 24-47 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf0430-0xf044e smbios0: Entry point: v2.1 (32-bit), Version: 2.5, BCD Revision: 2.5 aesni0: No AES or SHA support. acpi0: <DELL B10K > acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0 pci2: <ACPI PCI bus> on pcib2 vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xf6000000-0xf6ffffff,0xec000000-0xefffffff,0xf4000000-0xf5ffffff irq 24 at device 0.0 on pci2 vgapci0: Boot video device pcib3: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xff00-0xff1f irq 17 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xfc00-0xfc1f irq 22 at device 26.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xf7ffe000-0xf7ffe3ff irq 22 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci4: <ACPI PCI bus> on pcib5 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5761100> mem 0xf3de0000-0xf3deffff,0xf3df0000-0xf3dfffff irq 17 at device 0.0 on pci4 bge0: CHIP ID 0x05761100; ASIC REV 0x5761; CHIP REV 0x57611; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5761 10/100/1000baseT PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xff80-0xff9f irq 23 at device 29.0 on pci0 usbus4 on uhci3 usbus4: 12Mbps Full Speed USB v1.0 uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xff60-0xff7f irq 17 at device 29.1 on pci0 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0 usbus6 on uhci5 usbus6: 12Mbps Full Speed USB v1.0 ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xff980000-0xff9803ff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 usbus7: 480Mbps High Speed USB v2.0 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib6 re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xcc00-0xccff mem 0xf3bff000-0xf3bff0ff irq 16 at device 4.0 on pci5 re0: Chip rev. 0x10000000 re0: MAC rev. 0x00000000 miibus1: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH10 AHCI SATA controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 20 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd07ff,0xd0800-0xd2fff,0xd3000-0xd3fff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16. est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est1 attach returned 6 Timecounter "TSC-low" frequency 1266646597 Hz quality 1000 Timecounters tick every 1.000 msec ugen0.1: <Intel UHCI root HUB> at usbus0 ugen6.1: <Intel UHCI root HUB> at usbus6 uhub0 on usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen7.1: <Intel EHCI root HUB> at usbus7 uhub1 on usbus6 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 uhub2 on usbus7 ugen5.1: <Intel UHCI root HUB> at usbus5 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 ugen4.1: <Intel UHCI root HUB> at usbus4 uhub3 on usbus5 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen3.1: <Intel EHCI root HUB> at usbus3 uhub4 on usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub5 on usbus3 uhub6 on usbus2 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub7 on usbus1 uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 Trying to mount root from ufs:/dev/ada0p2 [rw]... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST3320418AS CC46> ATA8-ACS SATA 2.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 305245MB (625142448 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST4000VN0001-1SF178 AN02> ACS-3 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 3815447MB (7814037168 512 byte sectors) ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <ST4000VN0001-1SF178 AN02> ACS-3 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXX] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 3815447MB (7814037168 512 byte sectors) ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <ST4000VN0001-1SF178 AN02> ACS-3 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXX] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) ada4 at ahcich4 bus 0 scbus4 target 0 lun 0 ada4: <ST4000VN0001-1SF178 AN02> ACS-3 ATA SATA 3.x device ada4: [_SERIAL_NUMBER_XXXXX] ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 3815447MB (7814037168 512 byte sectors) ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 ses0: ada2,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 ses0: ada3,pass3 in 'Slot 03', SATA Slot: scbus3 target 0 ses0: ada4,pass4 in 'Slot 04', SATA Slot: scbus4 target 0 uhub6: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub7: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 usbus7 uhub5: 6 ports with 6 removable, self powered uhub2: 6 ports with 6 removable, self powered ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0xece0-0xecff mem 0xf7fff000-0xf7fff0ff irq 20 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found re0: link state changed to UP lo0: link state changed to UP bge0: link state changed to DOWN re0: link state changed to DOWN bge0: link state changed to UP re0: link state changed to UP