Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-08-24 01:26:50
From: root
Description: FreeBSD/amd64 on
---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-RELEASE-p9 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(vga): resolution 640x480 CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1800.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4105920512 (3915 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <090512 APIC1202> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20250807/tbfadt-743) ioapic0: MADT APIC ID 4 != hw id 1 ioapic0 <Version 2.0> irqs 0-23 Launching APs: 3 1 2 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xfa7f0-0xfa80e smbios0: Entry point: v2.1 (32-bit), Version: 2.6 aesni0: No AES or SHA support. acpi0: <090512 XSDT1202> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe780000-0xfe7fffff,0xd0000000-0xdfffffff,0xfe800000-0xfe8fffff irq 16 at device 2.0 on pci0 agp0: <Intel Pineview SVGA controller> on vgapci0 WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 16.0. agp0: aperture size is 256M, detected 8188k stolen memory vgapci0: Boot video device vgapci1: <VGA-compatible display> mem 0xfe680000-0xfe6fffff at device 2.1 on pci0 uhci0: <Intel 82801I (ICH9) USB controller> port 0xc880-0xc89f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801I (ICH9) USB controller> port 0xc800-0xc81f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801I (ICH9) USB controller> port 0xc480-0xc49f irq 19 at device 26.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe777c00-0xfe777fff irq 18 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 hdac0: <Intel 82801I HDA Controller> mem 0xfe770000-0xfe773fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci1: <ACPI PCI bus> on pcib2 em0: <Intel(R) Gigabit CT 82574L> port 0xdc00-0xdc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 18 at device 0.0 on pci1 em0: EEPROM V2.1-0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using 2 RX queues 2 TX queues em0: Using MSI-X interrupts with 3 vectors em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 2/1024, RX 2/1024 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib3 xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfeaf8000-0xfeafffff irq 16 at device 0.0 on pci2 xhci0: 32 bytes context size, 32-bit DMA xhci0: xECP capabilities <LEGACY,PROTO,PROTO> usbus4 on xhci0 usbus4: 5.0Gbps Super Speed USB v3.0 uhci3: <Intel 82801I (ICH9) USB controller> port 0xc400-0xc41f irq 23 at device 29.0 on pci0 uhci3: LegSup = 0x2f00 usbus5 on uhci3 usbus5: 12Mbps Full Speed USB v1.0 uhci4: <Intel 82801I (ICH9) USB controller> port 0xc080-0xc09f irq 19 at device 29.1 on pci0 uhci4: LegSup = 0x2f00 usbus6 on uhci4 usbus6: 12Mbps Full Speed USB v1.0 uhci5: <Intel 82801I (ICH9) USB controller> port 0xc000-0xc01f irq 18 at device 29.2 on pci0 uhci5: LegSup = 0x2f00 usbus7 on uhci5 usbus7: 12Mbps Full Speed USB v1.0 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe777800-0xfe777bff irq 23 at device 29.7 on pci0 usbus8: EHCI version 1.0 usbus8 on ehci1 usbus8: 480Mbps High Speed USB v2.0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib4 atapci0: <SiI 3114 SATA150 controller> port 0xe480-0xe487,0xe400-0xe403,0xec00-0xec07,0xe880-0xe883,0xe800-0xe80f mem 0xfeb7fc00-0xfeb7ffff irq 17 at device 1.0 on pci3 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 ata5: <ATA channel> at channel 3 on atapci0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH9 AHCI SATA controller> port 0xb400-0xb407,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb49f mem 0xfe777000-0xfe7777ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 (noperiph:ata3:0:-1:ffffffff): rescan already queued ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 (noperiph:ata4:0:-1:ffffffff): rescan already queued uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: forcing active-hi polarity for IRQ 4 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: forcing active-hi polarity for IRQ 3 ppc0: forcing active-hi polarity for IRQ 7 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16. Timecounter "TSC" frequency 1799978084 Hz quality 1000 Timecounters tick every 1.000 msec ugen2.1: <Intel UHCI root HUB> at usbus2 ugen1.1: <Intel UHCI root HUB> at usbus1 ugen3.1: <Intel EHCI root HUB> at usbus3 ugen4.1: <(0x1b21) XHCI root HUB> at usbus4 uhub0 on usbus2 uhub1 on usbus3 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub2 on usbus4 uhub2: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4 ugen0.1: <Intel UHCI root HUB> at usbus0 uhub3 on usbus1 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub4 on usbus0 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen6.1: <Intel UHCI root HUB> at usbus6 ugen7.1: <Intel UHCI root HUB> at usbus7 ugen8.1: <Intel EHCI root HUB> at usbus8 ugen5.1: <Intel UHCI root HUB> at usbus5 uhub5 on usbus6 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 uhub6 on usbus8 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 uhub7 on usbus5 uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub8 on usbus7 uhub8: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <VIA VT1708S_4 HDA CODEC> at cad 0 on hdac0 hdaa0: <VIA VT1708S_4 Audio Function Group> at nid 1 on hdacc0 hdaa0: No presence detection support at nid 29 pcm0: <VIA VT1708S_4 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,31,30,27 on hdaa0 pcm1: <VIA VT1708S_4 (Rear-panel Digital)> at nid 32 on hdaa0 uhub3: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub7: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered Trying to mount root from zfs:zroot/ROOT/default []... uhub2: 4 ports with 4 removable, self powered uhub8: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 usbus8 CAM ada0 at ata3 bus 0 scbus1 target 0 lun 0 ada0: <ST2000DL001-9VT156 CC41> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 1907729MB (3907029168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ata4 bus 0 scbus2 target 0 lun 0 ada1: <MB1000EBZQB HPG2> ATA8-ACS SATA 2.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada1: 953869MB (1953525168 512 byte sectors) ada2 at ahcich0 bus 0 scbus4 target 0 lun 0 ada2: <Hitachi HDS722020ALA330 JKAOA20N> ATA8-ACS SATA 2.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXX] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 1907729MB (3907029168 512 byte sectors) ada3 at ahcich1 bus 0 scbus5 target 0 lun 0 ada3: <TOSHIBA HDWR160 0603> ACS-3 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXX] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 5723166MB (11721045168 512 byte sectors) ada4 at ahcich2 bus 0 scbus6 target 0 lun 0 ada4: <WDC WD5000AAKX-60U6AA0 18.01H18> ATA8-ACS SATA 3.x device ada4: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada4: Command Queueing enabled ada4: 476940MB (976773168 512 byte sectors) ada5 at ahcich3 bus 0 scbus7 target 0 lun 0 ada5: <WDC WD5000AZLX-60K2TA0 01.01A01> ACS-3 ATA SATA 3.x device ada5: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada5: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada5: Command Queueing enabled ada5: 476940MB (976773168 512 byte sectors) ada6 at ahcich4 bus 0 scbus8 target 0 lun 0 ada6: <ST8000AS0002-1NA17Z AR17> ACS-2 ATA SATA 3.x device ada6: [_SERIAL_NUMBER_XXXXX] ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada6: Command Queueing enabled ada6: 7630885MB (15628053168 512 byte sectors) ada6: quirks=0x8<SMR_DM> ses0 at ahciem0 bus 0 scbus10 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada2,pass2 in 'Slot 00', SATA Slot: scbus4 target 0 ses0: ada3,pass3 in 'Slot 01', SATA Slot: scbus5 target 0 ses0: ada4,pass4 in 'Slot 02', SATA Slot: scbus6 target 0 ses0: ada5,pass5 in 'Slot 03', SATA Slot: scbus7 target 0 ses0: ada6,pass6 in 'Slot 04', SATA Slot: scbus8 target 0 uhub1: 6 ports with 6 removable, self powered uhub6: 6 ports with 6 removable, self powered GEOM: ada0: the primary GPT table is corrupt or invalid. GEOM: ada0: using the secondary instead -- recovery strongly advised. GEOM: ada1: the primary GPT table is corrupt or invalid. GEOM: ada1: using the secondary instead -- recovery strongly advised. GEOM: ada2: the primary GPT table is corrupt or invalid. GEOM: ada2: using the secondary instead -- recovery strongly advised. GEOM: ada3: the primary GPT table is corrupt or invalid. GEOM: ada3: using the secondary instead -- recovery strongly advised. GEOM: ada6: the primary GPT table is corrupt or invalid. GEOM: ada6: using the secondary instead -- recovery strongly advised. ugen0.2: <Numato Systems Pvt. Ltd. Numato Lab 32 Channel USB Relay Module> at usbus0 ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x400-0x41f mem 0xfe776c00-0xfe776cff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 em0: link state changed to UP lo0: link state changed to UP em0: link state changed to DOWN em0: link state changed to UP umodem0 on uhub4 umodem0: <Numato Systems Pvt. Ltd. Numato Lab 32 Channel USB Relay Module, class 2/0, rev 2.00/1.00, addr 2> on usbus0 umodem0: data interface 1, has no CM over data, has no break