Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-08-24 18:09:25
From: scanner
Description: FreeBSD/amd64 on Shuttle Inc. SH61R4
tailscale0: link state changed to DOWN Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 0 0 done All buffers synced. Uptime: 26d3h35m49s ---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (3292.67-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8177893376 (7799 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <Shuttl Shuttle > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 3 2 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf0480-0xf049e smbios0: Entry point: v2.1 (32-bit), Version: 2.7, BCD Revision: 2.7 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <Shuttl Shuttle> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfe507000-0xfe5073ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 hdac0: <Intel Cougar Point HDA Controller> mem 0xfe500000-0xfe503fff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe400000-0xfe407fff irq 18 at device 0.0 on pci3 xhci0: 32 bytes context size, 32-bit DMA usbus1 on xhci0 usbus1: 5.0Gbps Super Speed USB v3.0 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 19 at device 0.0 on pci4 re0: Using 1 MSI-X message re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00200000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci5: <ACPI PCI bus> on pcib5 ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfe506000-0xfe5063ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xfe505000-0xfe5057ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 ns8250: UART FCR is broken ns8250: UART FCR is broken uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 cpufreq0: <CPU frequency control> on cpu0 cpufreq1: <CPU frequency control> on cpu1 cpufreq2: <CPU frequency control> on cpu2 cpufreq3: <CPU frequency control> on cpu3 Timecounter "TSC-low" frequency 1646260349 Hz quality 1000 Timecounters tick every 1.000 msec ugen2.1: <Intel EHCI root HUB> at usbus2 ugen0.1: <Intel EHCI root HUB> at usbus0 ugen1.1: <(0x1b21) XHCI root HUB> at usbus1 uhub0 on usbus2 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ZFS filesystem version: 5 uhub1 on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub2 on usbus1 uhub2: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ZFS storage pool version: features support (5000) hdacc0: <IDT 92HD89C2 HDA CODEC> at cad 2 on hdac0 hdaa0: <IDT 92HD89C2 Audio Function Group> at nid 1 on hdacc0 pcm0: <IDT 92HD89C2 (Analog 2.0+HP/2.0)> at nid 13,10 and 14,11,15,12 on hdaa0 pcm1: <IDT 92HD89C2 (Rear-panel Digital)> at nid 34 on hdaa0 pcm2: <IDT 92HD89C2 (Digital)> at nid 35 on hdaa0 hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 pcm3: <Intel Cougar Point (HDMI/DP 8ch)> at nid 7 on hdaa1 ada0 at ahcich4 bus 0 scbus0 target 0 lun 0 ada0: <Samsung SSD 850 EVO 500GB EMT02B6Q> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> ada1 at ahcich5 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD15EARX-00PASB0 51.0AB51> ATA8-ACS SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1430799MB (2930277168 512 byte sectors) ada1: quirks=0x1<4K> ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 04', SATA Slot: scbus0 target 0 ses0: ada1,pass1 in 'Slot 05', SATA Slot: scbus1 target 0 Trying to mount root from zfs:zroot/ROOT/default []... uhub2: 4 ports with 4 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub4 on uhub1 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 Root mount waiting for: usbus0 usbus2 uhub3: 6 ports with 6 removable, self powered uhub4: 4 ports with 4 removable, self powered ugen2.3: <ThingM blink(1)> at usbus2 ugen0.3: <Generic 4-Port USB 2.0 Hub> at usbus0 uhub5 on uhub4 uhub5: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.36, addr 3> on usbus0 uhub5: MTT enabled uhub5: 4 ports with 4 removable, self powered ugen0.4: <Generic 4-Port USB 2.0 Hub> at usbus0 uhub6 on uhub5 uhub6: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.36, addr 4> on usbus0 uhub6: MTT enabled Root mount waiting for: usbus0 uhub6: 4 ports with 4 removable, self powered ichsmb0: <Intel Cougar Point SMBus controller> port 0xf040-0xf05f mem 0xfe504000-0xfe5040ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 re0: link state changed to UP lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP uled0 on uhub3 uled0: <ThingM blink(1), class 0/0, rev 1.10/1.00, addr 3> on usbus2