Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-09-03 05:15:40
From: yamori813
Description: c1k NetBSD 11.0
## Booting image at 81000000 ... Image Name: NetBSD/m83xxx Image Type: ARM NetBSD Kernel Image (uncompressed) Data Size: 3933072 Bytes = 3.8 MB Load Address: 80100000 Entry Point: 80100000 Verifying Checksum ... OK OK ## Transferring control to NetBSD stage-2 loader (at address 80100000) ... [ 1.0000000] NetBSD/evbarm (m83xxx) booting ... [ 1.0000000] initarm: Configuring system ... [ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025, 2026 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 11.0_STABLE (M83XXX_SATA) #0: Thu Sep 3 14:05:33 JST 2026 [ 1.0000000] hiroki@netbsd:/usr/home/hiroki/11.0/obj/sys/arch/evbarm/compile/M83XXX_SATA [ 1.0000000] total memory = 128 MB [ 1.0000000] avail memory = 120 MB [ 1.0000000] timecounter: Timecounters tick every 10.000 msec [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0 core 0: ARM1136J-S r1p5 (ARM11J V6J core) [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT [ 1.0000000] cpu0: L1 64KB/32B 4-way (512 set) VIPT Instruction cache [ 1.0000000] cpu0: L1 64KB/32B 4-way (512 set) write-back-locking-C VIPT Data cache [ 1.0000000] ahb0 at mainbus0: AMBA Advanced High Performance Bus [ 1.0000000] apb0 at ahb0 addr 0x10000000: AHB to APB Bus Bridge [ 1.0000000] intc0 at apb0 addr 0x100a0000: interrupts 0..63 [ 1.0000000] m83pmc0 at apb0 addr 0x100b0000: PMC [ 1.0000000] m83gpio0 at apb0 addr 0x10070000 intr 33 [ 1.0000000] com0 at apb0 addr 0x10090000-0x10093fff intr 41: ns16650, no ERS, 16-byte FIFO [ 1.0000000] com0: console [ 1.0000000] timer0 at apb0 addr 0x10050000 intr 31: sys clock [ 1.0000000] timer1 at apb0 addr 0x10050000 intr 30: stat clock [ 1.0000000] cge0 at apb0 addr 0x100d0000 intr 6: GEMAC Interface [ 1.0000000] cge0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] athsw0 at cge0 phy 0 [ 1.0000000] athsw0: AR8316 Ethernet Switch (ver 16 rev 1) [ 1.0000000] athsw0: MAC port == RGMII, port 4 = switch port [ 1.0000000] cge1 at apb0 addr 0x10190000 intr 7: GEMAC Interface [ 1.0000000] cge1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] ehci0 at ahb0 addr 0xf000000-0xf7fffff intr 5: USB Interface [ 1.0000000] ehci0: EHCI version 1.0 [ 1.0000000] usb0 at ehci0: USB revision 2.0 [ 1.0000000] m83pcie0 at ahb0 addr 0x10010000-0x1001ffff intr 14: PCIe Interface [ 1.0000000] pci0 at m83pcie0 bus 0 [ 1.0000000] pci0: memory space enabled [ 1.0000000] ahcisata0 at pci0 dev 0 function 0: vendor 1b21 product 0612 (rev. 0x02) [ 1.0000000] ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xeb32ffa1<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A> [ 1.0000000] ahcisata0: interrupting at pci [ 1.0000000] atabus0 at ahcisata0 channel 0 [ 1.0000000] atabus1 at ahcisata0 channel 1 [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0000030] timecounter: Timecounter "m83tmr" frequency 165000000 Hz quality 100 [ 1.0000040] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.0000040] gpio0 at m83gpio0: 32 pins [ 1.0300024] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.0300024] uhub0: 1 port with 1 removable, self powered [ 1.1416952] ahcisata0 port 1: device present, speed: 3.0Gb/s [ 3.0407483] wd0 at atabus1 drive 0 [ 3.0407483] wd0: <WDC WD3200BEVT-22A23T0> [ 3.0407483] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.0407483] wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors [ 3.0407483] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO [ 3.0407483] wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO [ 3.0407483] boot device: <unknown> [ 3.0407483] root on wd0a dumps on wd0b [ 3.1276334] cannot mount root, error = 22 [ 3.1276334] root device (default wd0a):