Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-09-10 01:14:38
From: Royce
Description: Samsung Q1 Ultra NP-Q1U (2007 UMPC), NetBSD 11.0/i386, custom kernel (touchscreen on uts, not uep)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025, 2026
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.0 (Q1U) #3: Mon Sep 7 10:52:56 AKDT 2026
redacted@redacted:/path/to/obj/sys/arch/i386/compile/Q1U
total memory = 1014 MB
avail memory = 983 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F7A60 000024 (v02 PTLTD )
ACPI: XSDT 0x000000003F6929DB 000084 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
ACPI: FACP 0x000000003F697BFE 0000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
ACPI: DSDT 0x000000003F69382B 00435F (v01 INTEL CALISTGA 06040000 INTL 20050624)
ACPI: FACS 0x000000003F698FC0 000040
ACPI: APIC 0x000000003F697CF2 000068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: HPET 0x000000003F697D5A 000038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: MCFG 0x000000003F697D92 00003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: TCPA 0x000000003F697DCE 000032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
ACPI: TMOR 0x000000003F697E00 000026 (v01 PTLTD 06040000 PTL 00000003)
ACPI: MCFG 0x000000003F697E26 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: BOOT 0x000000003F697E62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 0x000000003F697E8A 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
ACPI: SSDT 0x000000003F6935B0 00027B (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 0x000000003F692F45 00066B (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 0x000000003F692A5F 0004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Genuine Intel(R) processor 800MHz, id 0x6d8
cpu0: node 0, package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20241212
acpi0: X/RSDT: OemId <SECCSD,LH43STAR,06040000>, AslId < LTP,00000000>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): io 0x62,0x66
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0410): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0121): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0410): ACPI Display Output Device
acpiout3: brightness levels: [10,30,40,50,60,70,80,100]
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpivga0: autoconfiguration error: acpiout3 has same device ID as acpiout1
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0, bios detect
acpivga0: 0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port 1, head 0, bios detect
acpivga0: 0x0121 (acpiout2): VGA Analog Monitor, index 1, port 2, head 0, bios detect
acpidalb0 at acpi0 (MBTN, PNP0C32-1): Direct Application Launch Button
FWHD (INT0800) at acpi0 not configured
MATH (PNP0C04) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpitz0 at acpi0 (TZ00): cpu0
acpitz0: active cooling level 0: 55.0C
acpitz0: levels: critical 98.0 C, passive 95.0 C
acpitz1 at acpi0 (TZ01)
acpitz1: levels: critical 98.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 3 GPEs in block 00 to 1F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
agp0 at pchb0: i915-family chipset
agp0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Intel product 27a1 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci1 dev 0 function 0: Atheros 5424/2424
ath0: interrupting at ioapic0 pin 16
ath0: mac 10.0 phy 6.1 radio 10.2
i915drmkms0 at pci0 dev 2 function 0: Intel 82945GM/PM/GMS Integrated Graphics Device (rev. 0x03)
Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC262
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02)
ehci0: 64-bit DMA - limited
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
ehci0: Using DMA subregion for control data structures
usb4 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
bce0 at pci2 dev 5 function 0: Broadcom BCM4401-B1 10/100 Ethernet
bce0: interrupting at ioapic0 pin 22
bmtphy0 at bce0 phy 1: BCM4401 10/100 media interface, rev. 0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bce0: Ethernet address [_MAC_XXXXXXXXXX]
ichlpcib0 at pci0 dev 31 function 0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 1 us, pow 1000 mW
acpicpu0: C2: I/O, lat 1 us, pow 500 mW
acpicpu0: P0: FFH, lat 10 us, pow 27000 mW, 800 MHz
acpicpu0: P1: FFH, lat 10 us, pow 13000 mW, 600 MHz
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
acpiacad0: AC adapter online.
uhub5 at uhub0 port 1: ALCOR (0x058f) Generic USB Hub (0x9254), class 9/0, rev 1.10/3.12, addr 2
uhub5: 4 ports with 4 removable, self powered
umass0 at uhub4 port 4 configuration 1 interface 0
umass0: Generic (0x058f) Mass Storage Device (0x6366), rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Multi, Flash Reader, 1.00> disk removable
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Touchkit (0x0eef) Touch (0x0001), rev 1.10/1.00, addr 2, iclass 3/0
uhidev0: 2 report ids
ums0 at uhidev0 reportid 1: 2 buttons
wsmouse1 at ums0 mux 0
uts0 at uhidev0 reportid 2
wsmouse2 at uts0
sd0: fabricating a geometry
sd0: 7790 MB, 7790 cyl, 64 head, 32 sec, 512 bytes/sect x 15954944 sectors
sd0: fabricating a geometry
uhidev1 at uhub5 port 2 configuration 1 interface 0
uhidev1: vendor 070a (0x070a) product 0025 (0x0025), rev 1.00/1.00, addr 3, iclass 3/1
ums1 at uhidev1: 3 buttons and Z dir
wsmouse3 at ums1 mux 0
wd0 at atabus0 drive 0
wd0: <MCBOE32GQAPQ>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 31232 MB, 63455 cyl, 16 head, 63 sec, 512 bytes/sect x 63963136 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
uhidev2 at uhub5 port 4 configuration 1 interface 0
uhidev2: vendor 070a (0x070a) product 0025 (0x0025), rev 1.10/1.70, addr 4, iclass 3/1
ukbd0 at uhidev2
wskbd1 at ukbd0 mux 1
uhidev3 at uhub5 port 4 configuration 1 interface 1
uhidev3: vendor 070a (0x070a) product 0025 (0x0025), rev 1.10/1.70, addr 4, iclass 3/0
uhidev3: 3 report ids
uhid0 at uhidev3 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev3 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev3 reportid 3: input=2, output=0, feature=0
ubt0 at uhub2 port 1
ubt0: Broadcom Corp (0x0a5c) BCM92045NMD (0x2101), rev 2.00/3.54, addr 2
uhub6 at uhub4 port 8: vendor 144d (0x144d) product c032 (0xc032), class 9/0, rev 2.00/0.00, addr 3
uhub6: multiple transaction translators
uhub6: 3 ports with 0 removable, self powered
ugen0 at uhub3 port 1
ugen0: vendor 08ff (0x08ff) Fingerprint Sensor (0x1600), rev 1.10/c.10, addr 2
ugen1 at uhub6 port 2
ugen1: Vimicro Co.,ltd (0x0ac8) USB 2.0 Web Camera (0xc301), rev 2.00/1.00, addr 4
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/11.0/modules
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
i915drmkms0: warn: LVDS-1: EDID is invalid:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] Initialized overlay support.
[drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
[drm] DRM_I915_DEBUG enabled
[drm] DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xd0009000, size 1024x600, depth 32, stride 4096
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)