Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-09-11 01:44:41
From: rxg
Description: NetBSD/evbarm 11 on Google i.MX8MQ Phanbell
[ 1.0000000] NetBSD 11.0 (GENERIC64) #0: Thu Jul 30 15:23:12 UTC 2026 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64 [ 1.0000000] total memory = 1005 MB [ 1.0000000] avail memory = 968 MB [ 1.0000000] armfdt0 (root) [ 1.0000000] simplebus0 at armfdt0: Google i.MX8MQ Phanbell [ 1.0000000] simplebus1 at simplebus0 [ 1.0000000] cpus0 at simplebus0 [ 1.0000000] psci0 at simplebus0: PSCI 1.1 [ 1.0000000] simplebus2 at simplebus0 [ 1.0000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0 [ 1.0000000] cpu0: package 0, core 0, smt 0, numa 0 [ 1.0000000] cpufreqdt0 at cpu0 [ 1.0000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1 [ 1.0000000] cpu1: package 0, core 1, smt 0, numa 0 [ 1.0000000] cpufreqdt1 at cpu1 [ 1.0000000] cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2 [ 1.0000000] cpu2: package 0, core 2, smt 0, numa 0 [ 1.0000000] cpufreqdt2 at cpu2 [ 1.0000000] cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3 [ 1.0000000] cpu3: package 0, core 3, smt 0, numa 0 [ 1.0000000] cpufreqdt3 at cpu3 [ 1.0000000] simplebus3 at simplebus1 [ 1.0000000] simplebus4 at simplebus1 [ 1.0000000] simplebus5 at simplebus1 [ 1.0000000] simplebus6 at simplebus1 [ 1.0000000] syscon0 at simplebus3: System Controller Registers [ 1.0000000] gicvthree0 at simplebus1: GICv3 [ 1.0000000] syscon1 at simplebus3: System Controller Registers [ 1.0000000] fclock0 at simplebus0: 32768 Hz fixed clock (ckil) [ 1.0000000] fclock1 at simplebus0: 25000000 Hz fixed clock (osc_25m) [ 1.0000000] fclock2 at simplebus0: 27000000 Hz fixed clock (osc_27m) [ 1.0000000] fclock3 at simplebus0: 133000000 Hz fixed clock (clk_ext1) [ 1.0000000] fclock4 at simplebus0: 133000000 Hz fixed clock (clk_ext2) [ 1.0000000] fclock5 at simplebus0: 133000000 Hz fixed clock (clk_ext3) [ 1.0000000] fclock6 at simplebus0: 133000000 Hz fixed clock (clk_ext4) [ 1.0000000] syscon2 at simplebus3: System Controller Registers [ 1.0000000] syscon3 at simplebus3: System Controller Registers [ 1.0000000] fclock7 at simplebus0: 32768 Hz fixed clock (pmic_osc) [ 1.0000000] syscon4 at simplebus3: System Controller Registers [ 1.0000000] imx7gpc0 at simplebus3: General Power Controller [ 1.0000000] imx8mqccm0 at simplebus3: Clock Control Module [ 1.0000000] imxiomux0 at simplebus3: IOMUX Controller [ 1.0000000] gtmr0 at simplebus0: Generic Timer [ 1.0000000] gtmr0: interrupting on GICv3 irq 27 [ 1.0000000] armgtmr0 at gtmr0: Generic Timer (8000 kHz, virtual) [ 1.0000040] imxgpio0 at simplebus3: GPIO (gpio@30200000) [ 1.0000040] imxgpio0: interrupting on irq 96 [ 1.0000040] imxgpio0: interrupting on irq 97 [ 1.0000040] imxgpio0: interrupts 16384..16415 [ 1.0000040] gpio0 at imxgpio0: 32 pins [ 1.0000040] imxgpio1 at simplebus3: GPIO (gpio@30210000) [ 1.0000040] imxgpio1: interrupting on irq 98 [ 1.0000040] imxgpio1: interrupting on irq 99 [ 1.0000040] imxgpio1: interrupts 16416..16447 [ 1.0000040] gpio1 at imxgpio1: 32 pins [ 1.0000040] imxgpio2 at simplebus3: GPIO (gpio@30220000) [ 1.0000040] imxgpio2: interrupting on irq 100 [ 1.0000040] imxgpio2: interrupting on irq 101 [ 1.0000040] imxgpio2: interrupts 16448..16479 [ 1.0000040] gpio2 at imxgpio2: 32 pins [ 1.0000040] imxgpio3 at simplebus3: GPIO (gpio@30230000) [ 1.0000040] imxgpio3: interrupting on irq 102 [ 1.0000040] imxgpio3: interrupting on irq 103 [ 1.0000040] imxgpio3: interrupts 16480..16511 [ 1.0000040] gpio3 at imxgpio3: 32 pins [ 1.0000040] imxgpio4 at simplebus3: GPIO (gpio@30240000) [ 1.0000040] imxgpio4: interrupting on irq 104 [ 1.0000040] imxgpio4: interrupting on irq 105 [ 1.0000040] imxgpio4: interrupts 16512..16543 [ 1.0000040] gpio4 at imxgpio4: 32 pins [ 1.0000040] imxi2c0 at simplebus4 [ 1.0000040] iic0 at imxi2c0: I2C bus [ 1.0000040] pmic (rohm,bd71837) at iic0 addr 0x4b not configured [ 1.0000040] fregulator0 at simplebus0: VSD_3V3 [ 1.0000040] imxuart0 at simplebus4, 25000000 Hz [ 1.0000040] imxuart0: interrupting on irq 58 [ 1.0000040] imxuart0: console [ 1.0000040] imx8mqusbphy0 at simplebus1: USB PHY [ 1.0000040] imx8mqusbphy1 at simplebus1: USB PHY [ 1.0000040] /opp-table at simplebus0 not configured [ 1.0000040] /soc@0/bus@30000000/tmu@30260000 at simplebus3 not configured [ 1.0000040] /gpio-fan at simplebus0 not configured [ 1.0000040] /soc@0/gpu@38000000 at simplebus1 not configured [ 1.0000040] /soc@0/bus@30000000/sdma@302c0000 at simplebus3 not configured [ 1.0000040] /soc@0/bus@30800000/sdma@30bd0000 at simplebus4 not configured [ 1.0000040] /soc@0/interconnect@32700000 at simplebus1 not configured [ 1.0000040] /soc@0/bus@30000000/syscon@30340000/mux-controller at syscon2 not configured [ 1.0000040] enet0 at simplebus4: Gigabit Ethernet Controller [ 1.0000040] enet0: interrupting on irq 150 [ 1.0000040] enet0: interrupting on irq 151 [ 1.0000040] enet0: interrupting on irq 152 [ 1.0000040] enet0: couldn't find phy reset gpios [ 1.0000040] enet0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000040] /soc@0/memory-controller@3d400000 at simplebus1 not configured [ 1.0000040] /soc@0/bus@30000000/watchdog@30280000 at simplebus3 not configured [ 1.0000040] /soc@0/bus@30000000/snvs@30370000/snvs-rtc-lp at syscon1 not configured [ 1.0000040] /soc@0/bus@30400000/timer@306a0000 at simplebus5 not configured [ 1.0000040] /soc@0/bus@30800000/crypto@30900000 at simplebus4 not configured [ 1.0000040] /soc@0/bus@30800000/mailbox@30aa0000 at simplebus4 not configured [ 1.0000040] sdhc0 at simplebus4: SDMMC (400000 kHz) [ 1.0000040] sdhc0: interrupting on irq 54 [ 1.0000040] sdhc0: SDHC 3.0, rev 0, 32-bit ADMA2, 180000 kHz, HS SDR50 DDR50 1.8V 3.0V 3.3V, re-tuning mode 1, 4096 byte blocks [ 1.0000040] sdmmc0 at sdhc0 slot 0 [ 1.0000040] sdhc1 at simplebus4: SDMMC (200000 kHz) [ 1.0000040] sdhc1: interrupting on irq 55 [ 1.0000040] sdhc1: SDHC 3.0, rev 0, 32-bit ADMA2, 180000 kHz, HS 3.0V 3.3V, re-tuning mode 1, 4096 byte blocks [ 1.0000040] sdmmc1 at sdhc1 slot 0 [ 1.0000040] /soc@0/bus@32c00000/interrupt-controller@32e2d000 at simplebus6 not configured [ 1.0000040] xhci0 at simplebus1: cannot switch 'otg' mode to host [ 1.0000040] xhci1 at simplebus1: DesignWare USB3 XHCI (rev. 3.10a) [ 1.0000040] xhci1: interrupting on irq 73 [ 1.0000040] usb0 at xhci1: USB revision 3.0 [ 1.0000040] usb1 at xhci1: USB revision 2.0 [ 1.0000040] /soc@0/video-codec@38300000 at simplebus1 not configured [ 1.0000040] armpmu0 at simplebus0: Performance Monitor Unit [ 1.0000040] /soc@0/ddr-pmu@3d800000 at simplebus1 not configured [ 1.0000040] WARNING: system needs entropy for security; see entropy(7) [ 1.8259995] cpufreqdt0: couldn't acquire cpu-supply [ 1.8259995] cpufreqdt1: couldn't acquire cpu-supply [ 1.8360021] cpufreqdt2: couldn't acquire cpu-supply [ 1.8360021] cpufreqdt3: couldn't acquire cpu-supply [ 1.8460001] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.8560017] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.8760020] armpmu0: interrupting on GICv3 irq 23 [ 2.0160042] sdmmc1: SD card status: 4-bit, C10, U1, V10 [ 2.0160042] ld1 at sdmmc1: <0x9f:0x5449:00000:0x00:0x00000384:0x12c> [ 2.0260046] ld1: 30168 MB, 7661 cyl, 128 head, 63 sec, 512 bytes/sect x 61784064 sectors (0 bytes/physsect) [ 2.0382452] dk0 at ld1: "EFI", 163840 blocks at 32768, type: msdos [ 2.0489880] dk1 at ld1: "netbsd-root", 61579264 blocks at 196608, type: ffs [ 2.0489880] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 2.0591610] swwdog0: software watchdog initialized [ 2.0689875] WARNING: 6 errors while detecting hardware; check system log. [ 2.0789876] boot device: dk1 [ 2.0789876] root on dk1 [ 2.0889875] root file system type: ffs [ 2.0989880] kern.module.path=/stand/evbarm/11.0/modules [ 2.0989880] WARNING: no TOD clock present [ 2.1089880] WARNING: using filesystem time [ 2.1136146] WARNING: CHECK AND RESET THE DATE!