Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-09-24 17:57:55
From: lwhsu
Description: Andes QiLai SoC／Voyager Development Platform
Script started on Fri Sep 25 01:52:22 2026
Command: sudo cu -s 38400 -l /dev/cuaU1
Connected
Load DTB
Jump
U-Boot SPL 2022.04-00033-g9217e556f3 (May 08 2024 - 17:06:24 +0800)
Trying to boot from RAM
OpenSBI v1.2-59-g399aadb
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Andes OpenAMP mp hartid: 1
Andes OpenAMP sp hartid: 4
Andes OpenAMP sp sourceid: 0x4001
Andes OpenAMP andes_swmbox Addr:0x43fffc000 Size:0x4000
Andes OpenAMP Reserved Memory Addr:0x43f000000 Size:0x1000000
Platform Name : Generic
Platform Features : medeleg
Platform HART Count : 4
Platform IPI Device : andes_plicsw
Platform Timer Device : andes_plmt @ 62500000Hz
Platform Console Device : uart8250
Platform HSM Device : andes_smu
Platform PMU Device : andes_pmu
Platform Reboot Device : atcwdt200
Platform Shutdown Device : ---
Firmware Base : 0x400000000
Firmware Size : 228 KB
Runtime SBI Version : 1.0
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*,1*,2*,3*
Domain0 Region00 : 0x0000000400000000-0x000000040003ffff ()
Domain0 Region01 : 0x0000000000100000-0x00000000001fffff (I,R)
Domain0 Region02 : 0x0000000000400000-0x00000000007fffff (I)
Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000401200000
Domain0 Next Arg1 : 0x0000000401100000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART Priv Version : v1.11
Boot HART Base ISA : rv64imafdcnx
Boot HART ISA Extensions : none
Boot HART PMP Count : 16
Boot HART PMP Granularity : 8
Boot HART PMP Address Bits: 37
Boot HART MHPM Count : 4
Boot HART MHPM Bits : 64
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2022.04-00033-g9217e556f3 (May 08 2024 - 17:06:24 +0800)
DRAM: 16 GiB
Core: 13 devices, 10 uclasses, devicetree: board
MMC: mmc@30c00000: 0
Loading Environment from SPIFlash... SF: Detected mx25u1635e with page size 256 Bytes, erase size 4 KiB, total 2 MiB
OK
In: serial@30300000
Out: serial@30300000
Err: serial@30300000
Net: No ethernet found.
Hit any key to stop autoboot: 3 2 1 0
12246904 bytes read in 2458 ms (4.8 MiB/s)
Moving Image from 0x402000000 to 0x400200000, end=400dadf78
## Flattened Device Tree blob at 7ff3fa130
Booting using the fdt blob at 0x7ff3fa130
Loading Device Tree to 0000000403ff7000, end 0000000403fffcd7 ... OK
Starting kernel ...
---<<BOOT>>---
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Physical memory chunk(s):
0x400000000 - 0x7ffffffff, 16384 MB (4194304 pages)
Excluded memory regions:
0x400000000 - 0x4001fffff, 2 MB ( 512 pages) NoAlloc NoDump
0x400400000 - 0x40101afff, 12 MB ( 3099 pages) NoAlloc
0x43f000000 - 0x43fffffff, 16 MB ( 4096 pages) NoAlloc NoDump
Found 4 CPUs in the device tree
Copyright (c) 1992-2026 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 16.0-CURRENT n289403-96908dae1f7a VOYAGER riscv
FreeBSD clang version 21.1.8 (https://github.com/llvm/llvm-project.git llvmorg-21.1.8-0-g2078da43e25a)
WARNING: WITNESS option enabled, expect reduced performance.
WITNESS configuration requests 2856 KiB of startup allocations with witness_count=1536, lock_order_data_count=2048, lock_order_hash_size=1021
VT: init without driver.
Preloaded elf kernel "kernel" at 0xffffffc000be1c28.
SBI: OpenSBI v1.2
SBI Specification Version: 1.0
CPU 0 : Vendor=Andes Core=AX45MP Processor (Hart 0)
marchid=0x8000000000008a45, mimpid=0xc43
MMU: 0x1<Sv39>
ISA: 0x112d<Atomic,Compressed,Double,Float,Mult/Div>
S-mode Extensions: 0
real memory = 17179869184 (16384 MB)
Physical memory chunk(s):
0x0000000400200000 - 0x00000004003fffff, 2097152 bytes (512 pages)
0x000000040101b000 - 0x000000043effffff, 1040076800 bytes (253925 pages)
0x0000000440000000 - 0x00000007ea390fff, 15740768256 bytes (3842961 pages)
avail memory = 16697339904 (15923 MB)
Starting CPU 1 (hart 1)
Starting CPU 2 (hart 2)
Starting CPU 3 (hart 3)
hart 1 isa extensions: i m a f d c zicntr zicsr zifencei zihpm xandespmu
hart 2 isa extensions: i m a f d c zicntr zicsr zifencei zihpm xandespmu
hart 3 isa extensions: i m a f d c zicntr zicsr zifencei zihpm xandespmu
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
CPU 1 : Vendor=Andes Core=AX45MP Processor (Hart 1)
CPU 2 : Vendor=Andes Core=AX45MP Processor (Hart 2)
CPU 3 : Vendor=Andes Core=AX45MP Processor (Hart 3)
random: no preloaded entropy cache
random: no platform bootloader entropy
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
VIMAGE (virtualized network stack) enabled
hostuuid: using 00000000-0000-0000-0000-000000000000
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
random: entropy device external interface
kbd0 at kbdmux0
mem: <memory>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
tcp_log: tcp_log device
crypto: <crypto core>
ram0: reserving memory region: 400200000-400400000
ram0: reserving memory region: 40101b000-43f000000
ram0: reserving memory region: 440000000-800000000
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
clk_fixed0: <Fixed clock> on simplebus0
Clock: i2c_clk, parent: none, freq: 100000000
simplebus1: <Flattened device tree simple bus> on simplebus0
simplebus1: DMA window: memory at 0x400000000-0x7ffffffff is seen at 0x4400000000 by devices
simplebus2: <Flattened device tree simple bus> on simplebus0
simplebus2: DMA window: memory at 0x400000000-0x7ffffffff is seen at 0x4400000000 by devices
simplebus3: <Flattened device tree simple bus> on simplebus0
simplebus3: DMA window: memory at 0x400000000-0x7ffffffff is seen at 0x4400000000 by devices
sbi0: <RISC-V Supervisor Binary Interface>
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: Nominal frequency 100Mhz
cpu1: <Open Firmware CPU> on cpulist0
cpu1: Nominal frequency 100Mhz
cpu2: <Open Firmware CPU> on cpulist0
cpu2: Nominal frequency 100Mhz
cpu3: <Open Firmware CPU> on cpulist0
cpu3: Nominal frequency 100Mhz
intc0: <RISC-V Local Interrupt Controller> on ofwbus0
sbi_ipi0: <RISC-V SBI Inter-Processor Interrupts> on sbi0
plic0: <RISC-V PLIC> mem 0x2000000-0x3ffffff irq 12,13,14,15,16,17,18,19 on simplebus0
gpio0: <Andes ATCGPIO100 GPIO controller> mem 0x30700000-0x307fffff irq 2 on simplebus0
gpio0: revision 0x2, 16 pins
gpiobus0: <OFW GPIO bus> on gpio0
timer0: <RISC-V Timer>
Timecounter "RISC-V Timecounter" frequency 62500000 Hz quality 1000
Event timer "RISC-V Eventtimer" frequency 62500000 Hz quality 1000
rcons0: <RISC-V console>
ftsdc0100: <Faraday FTSDC010 SD/MMC controller> mem 0x30c00000-0x30c00fff irq 0 on simplebus0
ftsdc0100: revision 0x30107, 16 byte FIFO, 4-bit bus, clock 100000000 Hz/(2*(n+1))
atciic0: <Andes ATCIIC100 I2C controller> mem 0x30800000-0x308fffff irq 1 on simplebus0
atciic0: revision 0x12, 4 byte FIFO, clock 100000000 Hz, setup 0x5252100 -> 0x10b51cd5
iicbus0: <OFW I2C bus> on atciic0
iic0: <I2C generic I/O> on iicbus0
ds13rtc0: <Dallas/Maxim DS1374 RTC> at addr 0xd0 on iicbus0
gpioc0: <GPIO controller> at pins 0-15 on gpiobus0
atcwdt0: <Andes ATCWDT200 Watchdog Timer> mem 0x30500000-0x305fffff on simplebus0
atcwdt0: 15000000 Hz external clock, timeouts up to 143 s
pcib0: <Andes QiLai PCIe Controller> mem 0xc0000000-0xdfffffff,0x4002000-0x4002fff,0-0xffff irq 21 on simplebus1
pcib0: DBI vendor/device 0xabcd16c3, class/rev 0x1
pcib0: Config space at 0x1800000000 is 0 on the parent bus
pcib0: Bus is cache-coherent
pcib0: ATU MEM window size is too large. Up to 4GB windows are supported, trimming window size to 4GB
pcib0: Using iATU unroll mode
pcib0: Detected outbound iATU regions: 4
pcib0: 32 MSI vectors, doorbell at 0x4401910000
pcib0: COHERENCY_CONTROL3: 0x78787878
pcib0: link is down on entry, LTSSM disabled
pcib0: link down (SII_PM_STATE 0)
pci0: <OFW PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x16c3, dev=0xabcd, revid=0x01
domain=0, bus=0, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 3 supports D0 D1 D3 current D0
MSI supports 32 messages, 64 bit, vector masks
map[10]: type Memory, range 64, base 0, size 33, enabled
secbus=1, subbus=255
pcib1: <PCI-PCI bridge> at device 0.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 255
pci1: <PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
pcib2: <Andes QiLai PCIe Controller> mem 0xa0000000-0xbfffffff,0x4001000-0x4001fff,0-0xffff irq 22 on simplebus2
pcib2: DBI vendor/device 0xabcd16c3, class/rev 0x1
pcib2: Config space at 0x1000000000 is 0 on the parent bus
pcib2: Bus is cache-coherent
pcib2: ATU MEM window size is too large. Up to 4GB windows are supported, trimming window size to 4GB
pcib2: Using iATU unroll mode
pcib2: Detected outbound iATU regions: 4
pcib2: 32 MSI vectors, doorbell at 0x4401b88000
pcib2: COHERENCY_CONTROL3: 0x78787878
pcib2: link is down on entry, LTSSM disabled
pcib2: link down (SII_PM_STATE 0)
pci2: <OFW PCI bus> on pcib2
pci2: domain=2, physical bus=0
found-> vendor=0x16c3, dev=0xabcd, revid=0x01
domain=2, bus=0, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 3 supports D0 D1 D3 current D0
MSI supports 32 messages, 64 bit, vector masks
map[10]: type Memory, range 64, base 0, size 33, enabled
secbus=1, subbus=255
pcib3: <PCI-PCI bridge> at device 0.0 on pci2
pcib3: domain 2
pcib3: secondary bus 1
pcib3: subordinate bus 255
pci3: <PCI bus> on pcib3
pcib3: allocated bus range (1-1) for rid 0 of pci3
pci3: domain=2, physical bus=1
pcib4: <Andes QiLai PCIe Controller> mem 0x80000000-0x9fffffff,0x4000000-0x4000fff,0-0xffff irq 23 on simplebus3
pcib4: DBI vendor/device 0xabcd16c3, class/rev 0x1
pcib4: Config space at 0x2000000000 is 0 on the parent bus
pcib4: Bus is cache-coherent
pcib4: ATU MEM window size is too large. Up to 4GB windows are supported, trimming window size to 4GB
pcib4: Using iATU unroll mode
pcib4: Detected outbound iATU regions: 4
pcib4: 32 MSI vectors, doorbell at 0x4401b7c000
pcib4: COHERENCY_CONTROL3: 0x78787878
pcib4: link is down on entry, LTSSM disabled
pcib4: link down (SII_PM_STATE 0)
pci4: <OFW PCI bus> on pcib4
pci4: domain=4, physical bus=0
found-> vendor=0x16c3, dev=0xabcd, revid=0x01
domain=4, bus=0, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 3 supports D0 D1 D3 current D0
MSI supports 32 messages, 64 bit, vector masks
map[10]: type Memory, range 64, base 0, size 33, enabled
secbus=1, subbus=255
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pcib5: domain 4
pcib5: secondary bus 1
pcib5: subordinate bus 255
pci5: <PCI bus> on pcib5
pcib5: allocated bus range (1-1) for rid 0 of pci5
pci5: domain=4, physical bus=1
simplebus0: <timer@100000> mem 0x100000-0x1fffff irq 3,4,5,6 compat andestech,qilai-plmt (no driver attached)
simplebus0: <cache-controller@200000> mem 0x200000-0x2fffff irq 7 compat andestech,qilai-ax45mp-cache (no driver attached)
simplebus0: <interrupt-controller@400000> mem 0x400000-0x7fffff irq 8,9,10,11 compat andestech,qilai-plicsw (no driver attached)
simplebus0: no default resources for rid = 0, type = 4
uart0: <Non-standard ns8250 class UART with FIFOs> mem 0x30300000-0x303fffff irq 20 on simplebus0
uart0: console (38580,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
IPsec: Initialized Security Association Processing.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072
usb_needs_explore_all: no devclass
ds13rtc0: WARNING: oscillator stop flag is set; the time may be invalid (ignored as configured, the time is unverified)
ds13rtc0: registered as a time-of-day clock, resolution 1.000000s
sbi_ipi0: using for IPIs
Release APs
Secondary CPU 1 fully online
Trying to mount root from ufs:/dev/gpt/voyagerroot []...
Secondary CPU 2 fully online
Secondary CPU 3 fully online
WARNING: WITNESS option enabled, expect reduced performance.
regulator: shutting down unused regulators
ftsdc0100: card inserted
mmc0: <MMC/SD bus> on ftsdc0100
mmc0: Probing bus
mmc0: SD 2.0 interface conditions: OK
mmc0: SD probe: OK (OCR: 0x00ff8000)
mmc0: Current OCR: 0x00ff8000
mmc0: Probing cards
mmc0: New card detected (CID 275048534431364730da9c796b00fcaf)
mmc0: New card detected (CSD 400e00325b59000073a77f800a4000eb)
mmc0: Card at relative address 0x0007 added:
mmc0: card: SDHC SD16G 3.0 SN DA9C796B MFG 12/2015 by 39 PH
mmc0: quirks: 0
mmc0: bus: 4bit, 50MHz (high speed timing)
mmc0: memory: 30318592 blocks, erase sector 8192 blocks
mmc0: setting transfer rate to 25.000MHz (normal speed timing)
mmcsd0: 16GB <SDHC SD16G 3.0 SN DA9C796B MFG 12/2015 by 39 PH> at mmc0 25.0MHz/4bit/128-block
GEOM: new disk mmcsd0
mmc0: setting bus width to 4 bits normal speed timing
GEOM: mmcsd0: the secondary GPT header is not in the last LBA.
GEOM_PART: partition 1 on (mmcsd0, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (mmcsd0, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 3 on (mmcsd0, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 4 on (mmcsd0, GPT) is not aligned on 4194304 bytes
GEOM: diskid/DISK-DA9C796B: the secondary GPT header is not in the last LBA.
GEOM_PART: partition 1 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 3 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 4 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
ds13rtc0: providing initial system time
failed to load CTF for kernel: 2
start_init: trying /sbin/init
Setting hostuuid: 0255b617-a583-465a-a422-0426b330d3e9.
Setting hostid: 0x56b955b4.
Starting file system checks:
GEOM: diskid/DISK-DA9C796B: the secondary GPT header is not in the last LBA.
GEOM_PART: partition 1 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 3 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 4 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
/dev/gpt/voyagerroot: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/gpt/voyagerroot: clean, 433009 free (33 frags, 54122 blocks, 0.0% fragmentation)
GEOM: diskid/DISK-DA9C796B: the secondary GPT header is not in the last LBA.
GEOM_PART: partition 1 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 3 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
GEOM_PART: partition 4 on (diskid/DISK-DA9C796B, GPT) is not aligned on 4194304 bytes
Mounting local filesystems:.
random: unblocking device.
Linux riscv64 ELF exec handler installed
linprocfs registered
pfs_add_node: homonymous siblings: 'pci0000:00/0000:00:00.0' type 2
linsysfs_run_bus: pcib3 omitted from sysfs tree, error 17
pfs_add_node: homonymous siblings: 'pci0000:00/0000:00:00.0' type 2
linsysfs_run_bus: pcib5 omitted from sysfs tree, error 17
linsysfs registered
[: -eq: unexpected operator
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Setting hostname: voyager.
Setting up harvesting: RANDOMDEV,[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
lo0: link state changed to UP
Starting Network: lo0.
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet[_IP_XXXX] netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Starting devd.
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Updating motd:.
Clearing /tmp (X related).
Updating /var/run/os-release done.
Creating and/or trimming log files.
Starting syslogd.
Mounting late filesystems:.
Starting cron.
Starting background file system checks in 60 seconds.
Thu Sep 24 17:51
FreeBSD/riscv (voyager) (ttyu0)
login: root
Sep 24 17:51:55 voyager login[1443]: ROOT LOGIN (root) ON ttyu0
Last login: Thu Sep 24 17:39:44 on ttyu0
FreeBSD 16.0-CURRENT (VOYAGER) n289403-96908dae1f7a
FreeBSD on the Andes QiLai Voyager (4 x AX45MP, NX27V, 16 GiB) -- proof of concept.
Console: 38400 8N1. Root on the SD card. See /root/demo/README for what to try.
7[r[999;999H[6n8root@voyager:~ # uname -a
FreeBSD voyager 16.0-CURRENT FreeBSD 16.0-CURRENT n289403-96908dae1f7a VOYAGER riscv
root@voyager:~ # shutdown -p now
Shutdown NOW!
shutdown: [pid 1448]
root@voyager:~ # Sep 24 17:52:15 voyager shutdown[1448]: power-down by root:
Stopping cron.
Waiting for PIDS: 1417.
Stopping devd.
Waiting for PIDS: 935.
Writing entropy file: .
Writing early boot entropy file: .
.
Terminated
Sep 24 17:52:23 voyager syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 1 1 0 0 done
All buffers synced.
Unmounting 1/8 /compat/linux/dev/shm
Unmounting 2/8 /compat/linux/dev/fd
Unmounting 3/8 /compat/linux/dev
Unmounting 4/8 /compat/linux/sys
Unmounting 5/8 /compat/linux/proc
Unmounting 6/8 /tmp
Unmounting 7/8 /
Unmounting 8/8 /dev
Uptime: 1m3s
Command exit status: 0
Script done on Fri Sep 25 01:53:45 2026