Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-10-03 13:31:01
From: tingo
Description: FreeBSD/amd64 on ASRock BeeBox-S 7100U
swp_pager_getswapspace(5): failed swp_pager_getswapspace(30): failed swp_pager_getswapspace(9): failed swp_pager_getswapspace(11): failed swp_pager_getswapspace(23): failed ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out usb_dev_suspend_peer: Setting device remote wakeup failed usb_dev_suspend_peer: Setting device remote wakeup failed usb_dev_resume_peer: Clearing device remote wakeup failed: USB_ERR_IOERROR uhub3: at uhub2, port 2, addr 28 (disconnected) uhub3: detached uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 28> on usbus0 uhub3: 4 ports with 4 removable, self powered usb_dev_resume_peer: Clearing device remote wakeup failed: USB_ERR_IOERROR uhub4: at uhub2, port 3, addr 29 (disconnected) uhub4: detached uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 29> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out pid 1984 (waterfox), jid 0, uid 1001, was killed: failed to reclaim memory ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out swap_pager: out of swap space swp_pager_getswapspace(19): failed swap_pager: out of swap space swp_pager_getswapspace(5): failed swp_pager_getswapspace(24): failed swap_pager: out of swap space swp_pager_getswapspace(5): failed swp_pager_getswapspace(11): failed swp_pager_getswapspace(6): failed swp_pager_getswapspace(22): failed swp_pager_getswapspace(13): failed swap_pager: out of swap space swp_pager_getswapspace(4): failed swp_pager_getswapspace(22): failed swp_pager_getswapspace(29): failed swp_pager_getswapspace(27): failed swp_pager_getswapspace(10): failed swap_pager: out of swap space swp_pager_getswapspace(20): failed swp_pager_getswapspace(13): failed swp_pager_getswapspace(8): failed swp_pager_getswapspace(9): failed ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ugen0.6: <vendor 0x8087 product 0x07dc> at usbus0 ng_ubt: HCI command 0x0c03 timed out ugen0.3: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub2: at uhub0, port 2, addr 2 (disconnected) ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 4 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 4 (disconnected) ums1: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 28 (disconnected) uhub3: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 29 (disconnected) uhub4: detached uhub2: detached ugen0.3: <GASIA Semi. USB HUB 2.0> at usbus0 uhub2 on uhub0 uhub2: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 19> on usbus0 uhub2: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 20> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 20> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 21> on usbus0 hdacc1: Unexpected unsolicited response with tag 63: ffffffff hdacc1: Unexpected unsolicited response with tag 63: ffffffff uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 15> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.7: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected) uhub5: at uhub0, port 3, addr 6 (disconnected) ugen0.8: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus0 (disconnected) uslcom0: at uhub5, port 1, addr 47 (disconnected) uslcom0: detached uhub5: detached ugen0.7: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub5 on uhub0 uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 11> on usbus0 uhub5: 4 ports with 4 removable, self powered ugen0.8: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus0 uslcom0 on uhub5 uslcom0: <Silicon Labs CP2102 USB to UART Bridge Controller, class 0/0, rev 1.10/1.00, addr 8> on usbus0 swap_pager: out of swap space swp_pager_getswapspace(17): failed ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 20 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 20 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 14> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 14> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 21 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 23> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 15 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 24> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 14 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 14 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 26> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 26> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 23 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 22> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 24 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 30> on usbus0 uhub4: 4 ports with 4 removable, self powered wlan0: link state changed to DOWN iwm0: iwm_auth: failed to add sta iwm0: iwm_newstate: could not move to auth state: 35 iwm0: iwm_auth: failed to set multicast iwm0: iwm_newstate: could not move to auth state: 35 swp_pager_getswapspace(21): failed iwm0: dumping device error log iwm0: Start Error Log Dump: iwm0: Status: 0x3, count: 6 iwm0: 0x00002073 | ADVANCED_SYSASSERT iwm0: 000002F0 | trm_hw_status0 iwm0: 00000000 | trm_hw_status1 iwm0: 00000B30 | branchlink2 iwm0: 000148E0 | interruptlink1 iwm0: 00000000 | interruptlink2 iwm0: DEADBEEF | data1 iwm0: DEADBEEF | data2 iwm0: DEADBEEF | data3 iwm0: 00000000 | beacon time iwm0: 01B618DE | tsf low iwm0: 00000000 | tsf hi iwm0: 00000000 | time gp1 iwm0: 01B618DF | time gp2 iwm0: 00000000 | uCode revision type iwm0: 00000011 | uCode version major iwm0: 000561E2 | uCode version minor iwm0: 00000164 | hw version iwm0: 0080FF0F | board version iwm0: 09350018 | hcmd iwm0: 00022080 | isr0 iwm0: 00000000 | isr1 iwm0: 00000002 | isr2 iwm0: 00400080 | isr3 iwm0: 00000000 | isr4 iwm0: 01000112 | last cmd Id iwm0: 00000000 | wait_event iwm0: 00000000 | l2p_control iwm0: 00000020 | l2p_duration iwm0: 00000000 | l2p_mhvalid iwm0: 00000000 | l2p_addr_match iwm0: 00000007 | lmpm_pmg_sel iwm0: 15061432 | timestamp iwm0: 000090A0 | flow_handler iwm0: driver status: iwm0: tx ring 0: qid=0 cur=0 queued=0 iwm0: tx ring 1: qid=1 cur=0 queued=0 iwm0: tx ring 2: qid=2 cur=0 queued=0 iwm0: tx ring 3: qid=3 cur=0 queued=0 iwm0: tx ring 4: qid=4 cur=0 queued=0 iwm0: tx ring 5: qid=5 cur=0 queued=0 iwm0: tx ring 6: qid=6 cur=0 queued=0 iwm0: tx ring 7: qid=7 cur=0 queued=0 iwm0: tx ring 8: qid=8 cur=0 queued=0 iwm0: tx ring 9: qid=9 cur=54 queued=1 iwm0: tx ring 10: qid=10 cur=0 queued=0 iwm0: tx ring 11: qid=11 cur=0 queued=0 iwm0: tx ring 12: qid=12 cur=0 queued=0 iwm0: tx ring 13: qid=13 cur=0 queued=0 iwm0: tx ring 14: qid=14 cur=0 queued=0 iwm0: tx ring 15: qid=15 cur=0 queued=0 iwm0: tx ring 16: qid=16 cur=0 queued=0 iwm0: tx ring 17: qid=17 cur=0 queued=0 iwm0: tx ring 18: qid=18 cur=0 queued=0 iwm0: tx ring 19: qid=19 cur=0 queued=0 iwm0: tx ring 20: qid=20 cur=0 queued=0 iwm0: tx ring 21: qid=21 cur=0 queued=0 iwm0: tx ring 22: qid=22 cur=0 queued=0 iwm0: tx ring 23: qid=23 cur=0 queued=0 iwm0: tx ring 24: qid=24 cur=0 queued=0 iwm0: tx ring 25: qid=25 cur=0 queued=0 iwm0: tx ring 26: qid=26 cur=0 queued=0 iwm0: tx ring 27: qid=27 cur=0 queued=0 iwm0: tx ring 28: qid=28 cur=0 queued=0 iwm0: tx ring 29: qid=29 cur=0 queued=0 iwm0: tx ring 30: qid=30 cur=0 queued=0 iwm0: rx ring: cur=150 iwm0: 802.11 state 1 iwm0: iwm_intr: controller panicked, iv_state = 1; restarting iwm0: iwm_auth: failed to add sta iwm0: iwm_newstate: could not move to auth state: 35 wlan0: link state changed to UP ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 26 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 26 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 31> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 31> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 22 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 32> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 30 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 33> on usbus0 uhub4: 4 ports with 4 removable, self powered swap_pager: out of swap space swp_pager_getswapspace(2): failed ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 31 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 31 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 34> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 34> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 32 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 35> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 33 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 36> on usbus0 uhub4: 4 ports with 4 removable, self powered swap_pager: out of swap space swp_pager_getswapspace(3): failed swap_pager: out of swap space swp_pager_getswapspace(6): failed swap_pager: out of swap space swp_pager_getswapspace(22): failed swap_pager: out of swap space swp_pager_getswapspace(8): failed ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 34 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 34 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 37> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 37> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 35 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 38> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 36 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 39> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 37 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 37 (disconnected) ums1: detached usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 4> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 4> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 38 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 41> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 39 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 42> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 4 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 4 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 43> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 43> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 43 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 43 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 7> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 7> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 41 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 25> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 42 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 44> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 7 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 7 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 45> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 45> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 25 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 46> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 44 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 48> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 45 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 45 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 49> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 49> on usbus0 ums1: error reading report description device_attach: ums1 attach returned 12 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 46 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 50> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 48 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 51> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 49 (disconnected) ukbd0: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 53> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 53> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 50 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 54> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 51 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 55> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 53 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 53 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 52> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 52> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 54 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 56> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 55 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 57> on usbus0 uhub4: 4 ports with 4 removable, self powered ukbd0: at uhub2, port 1, addr 52 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 52 (disconnected) ums1: detached usbd_req_re_enumerate: addr=52, port reset failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=52, port reset failed, USB_ERR_IOERROR uhub3: at uhub2, port 2, addr 56 (disconnected) uhub3: detached usbd_req_re_enumerate: addr=56, port reset failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=56, port reset failed, USB_ERR_IOERROR uhub4: at uhub2, port 3, addr 57 (disconnected) uhub4: detached usbd_req_re_enumerate: addr=57, port reset failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=57, port reset failed, USB_ERR_IOERROR uhub2: at uhub0, port 2, addr 19 (disconnected) ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub2: detached uhub2 on uhub0 uhub2: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 19> on usbus0 uhub2: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 58> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 58> on usbus0 ums1: error reading report description device_attach: ums1 attach returned 12 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 60> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 61> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 58 (disconnected) ukbd0: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 62> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 62> on usbus0 ums1: error reading report description device_attach: ums1 attach returned 12 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 60 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 59> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 61 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 63> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 62 (disconnected) ukbd0: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 64> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 64> on usbus0 ums1: error reading report description device_attach: ums1 attach returned 12 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 59 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 3> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 63 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 5> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 64 (disconnected) ukbd0: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 9> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 9> on usbus0 ums1: error reading report description device_attach: ums1 attach returned 12 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 3 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 10> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 5 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 4> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 9 (disconnected) ukbd0: detached usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 4> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 4> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 10 (disconnected) uhub3: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 13> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 4 (disconnected) uhub4: detached ugen0.9: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 16> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 4 (disconnected) ukbd0: detached ums1: at uhub2, port 1, addr 4 (disconnected) ums1: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 17> on usbus0 kbd2 at ukbd0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 17> on usbus0 ums1: error reading report description device_attach: ums1 attach returned 12 ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 17 (disconnected) ukbd0: detached ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub4 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 27> on usbus0 kbd2 at ukbd0 ums1 on uhub4 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 27> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 wlan0: link state changed to DOWN Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 9 9 0 0 done All buffers synced. ---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.4-RELEASE-p10 releng/14.4-n273778-8b3713b7410d GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(efifb): resolution 1920x1200 CPU: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz (2400.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0xc000000<IBPB,STIBP> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33026211840 (31496 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 1 2 3 random: entropy device external interface kbd1 at kbdmux0 Deprecated code (to be removed in FreeBSD 15): MIDI sequencer: no longer needed or used efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xf0600-0xf0617 smbios0: Entry point: v3 (64-bit), Version: 3.0 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 Event timer "HPET1" frequency 24000000 Hz quality 440 Event timer "HPET2" frequency 24000000 Hz quality 440 Event timer "HPET3" frequency 24000000 Hz quality 440 Event timer "HPET4" frequency 24000000 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xdf230000-0xdf23ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control xhci_interrupt: host controller halted usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf250000-0xdf251fff,0xdf254000-0xdf2540ff,0xdf253000-0xdf2537ff irq 16 at device 23.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib2 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf100000-0xdf107fff irq 19 at device 0.0 on pci2 xhci1: 32 bytes context size, 64-bit DMA usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 pci4: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) hdac0: <Intel Kaby Lake-LP HDA Controller> mem 0xdf248000-0xdf24bfff,0xdf220000-0xdf22ffff irq 16 at device 31.3 on pci0 em0: <Intel(R) I219-V SPT> mem 0xdf200000-0xdf21ffff irq 16 at device 31.6 on pci0 em0: EEPROM V0.2-4 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. hwpstate_intel0: <Intel Speed Shift> on cpu0 cpufreq0: <CPU frequency control> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 cpufreq1: <CPU frequency control> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 cpufreq2: <CPU frequency control> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 cpufreq3: <CPU frequency control> on cpu3 Timecounter "TSC-low" frequency 1199999713 Hz quality 1000 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC283 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC283 (Front Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 pcm1: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 Trying to mount root from ufs:/dev/ada1p8 [rw]... ugen1.1: <(0x1b21) XHCI root HUB> at usbus1 uhub0 on usbus1 uhub0: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen0.1: <Intel XHCI root HUB> at usbus0 uhub1 on usbus0 uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <CT1000MX500SSD1 M3CR022> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 ada1: <WDC WDS240G1G0B-00RC30 Z3311000> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 228936MB (468862128 512 byte sectors) ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> uhub0: 4 ports with 4 removable, self powered uhub1: 18 ports with 18 removable, self powered Root mount waiting for: usbus0 ugen0.2: <vendor 0x04f3 PS/2+USB Mouse> at usbus0 ugen0.3: <GASIA Semi. USB HUB 2.0> at usbus0 uhub2 on uhub1 uhub2: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 2> on usbus0 Root mount waiting for: usbus0 uhub2: 4 ports with 4 removable, self powered usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) Root mount waiting for: usbus0 usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_IOERROR, ignored) ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 4> on usbus0 kbd2 at ukbd0 ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 4> on usbus0 Root mount waiting for: usbus0 uhub3: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.6: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 5> on usbus0 uhub4: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.7: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub5 on uhub1 uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 6> on usbus0 uhub5: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.8: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus0 ugen0.9: <vendor 0x8087 product 0x07dc> at usbus0 [drm] Got Intel graphics stolen memory base 0x80000000, size 0x10000000 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io i915/kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915/kbl_dmc_ver1_04.bin either kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/kbl_dmc_ver1_04.bin either i915_kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915_kbl_dmc_ver1_04.bin either drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' lkpi_iic0: <LinuxKPI I2C> on drmn0 iicbus0: <Philips I2C bus> on lkpi_iic0 drmn0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) iic0: <I2C generic I/O> on iicbus0 lkpi_iic1: <LinuxKPI I2C> on drmn0 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn0 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 sysctl_add_oid: can't re-use a leaf (hw.dri.debug)! lkpi_iic3: <LinuxKPI I2C> on drm2 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "drmfb". start FB_INFO: height=1200 width=1920 depth=32 pbase=0xc0000000 vbase=0xfffff800c0000000 name=drmn0 id=i915drmfb flags=0x0 stride=7680 end FB_INFO coretemp0: <CPU On-Die Thermal Sensors> on cpu0 Intel(R) Wireless WiFi based driver for FreeBSD pchtherm0: <Skylake PCH Thermal Subsystem> mem 0xdf256000-0xdf256fff irq 18 at device 20.2 on pci0 ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xf040-0xf05f mem 0xdf252000-0xdf2520ff irq 16 at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 iwm0: <Intel(R) Dual Band Wireless AC 3160> mem 0xdf000000-0xdf001fff irq 16 at device 0.0 on pci3 iwm0: hw rev 0x160, fw ver 17.352738.0, address [_MAC_XXXXXXXXXX] wlan0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 (disconnected) ukbd0: at uhub2, port 1, addr 4 (disconnected) ukbd0: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub3: at uhub2, port 2, addr 4 (disconnected) uhub3: detached ugen0.4: <GASIA Semi. USB HUB 2.0> at usbus0 uhub3 on uhub2 uhub3: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 9> on usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.6: <GASIA Semi. USB HUB 2.0> at usbus0 (disconnected) uhub4: at uhub2, port 3, addr 5 (disconnected) uhub4: detached ugen0.5: <GASIA Semi. USB HUB 2.0> at usbus0 uhub4 on uhub2 uhub4: <GASIA Semi. USB HUB 2.0, class 9/0, rev 2.00/1.00, addr 10> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen0.6: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 11> on usbus0 kbd2 at ukbd0 Cuse v0.1.37 @ /dev/cuse ums0 on uhub1 ums0: <vendor 0x04f3 PS/2+USB Mouse, class 0/0, rev 1.10/22.90, addr 1> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 ums1 on uhub2 ums1: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 11> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 uslcom0 on uhub5 uslcom0: <Silicon Labs CP2102 USB to UART Bridge Controller, class 0/0, rev 1.10/1.00, addr 7> on usbus0 wlan0: link state changed to UP