Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-10-16 00:44:19
From: linear
Description: NetBSD/amd64 11.0 on Dell Latitude e6400, canoeboot (blob-free coreboot)
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024, 2025, 2026 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 11.0 (GENERIC) #0: Thu Jul 30 15:23:12 UTC 2026 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC [ 1.000000] total memory = 3830 MB [ 1.000000] avail memory = 3678 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000004] mainbus0 (root) [ 1.000004] ACPI: RSDP 0x00000000000F6C10 000024 (v02 COREv4) [ 1.000004] ACPI: XSDT 0x000000007F74C0E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 1.000004] ACPI: FACP 0x000000007F74E630 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628) [ 1.000004] ACPI: DSDT 0x000000007F74C280 0023AD (v02 COREv4 COREBOOT 20090419 INTL 20230628) [ 1.000004] ACPI: FACS 0x000000007F74C240 000040 [ 1.000004] ACPI: SSDT 0x000000007F74E750 00090A (v02 COREv4 COREBOOT 00000000 CORE 20230628) [ 1.000004] ACPI: MCFG 0x000000007F74F060 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 1.000004] ACPI: APIC 0x000000007F74F0A0 000062 (v03 COREv4 COREBOOT 00000000 CORE 20230628) [ 1.000004] ACPI: DMAR 0x000000007F74F110 000078 (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 1.000004] ACPI: HPET 0x000000007F74F190 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 1.000004] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.000004] ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 24 pins [ 1.000004] cpu0 at mainbus0 apid 0 [ 1.000004] cpu0: Use lfence to serialize rdtsc [ 1.000004] cpu0: Intel(R) Core(TM)2 CPU P8600 @ 2.40GHz, id 0x1067a [ 1.000004] cpu0: node 0, package 0, core 0, smt 0 [ 1.000004] cpu1 at mainbus0 apid 1 [ 1.000004] cpu1: Intel(R) Core(TM)2 CPU P8600 @ 2.40GHz, id 0x1067a [ 1.000004] cpu1: node 0, package 0, core 1, smt 0 [ 1.000004] acpi0 at mainbus0: Intel ACPICA 20241212 [ 1.000004] acpi0: X/RSDT: OemId <COREv4,COREBOOT,00000000>, AslId <CORE,20230628> [ 1.000004] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000 [ 1.000004] acpi0: SCI interrupting at int 9 [ 1.000004] acpi0: fixed power button present [ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [ 1.001031] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.001031] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [ 1.001178] acpivga0 at acpi0 (GFX0): ACPI Display Adapter [ 1.001178] acpiout0 at acpivga0 (BOX3, 0x0000): ACPI Display Output Device [ 1.001178] acpiout1 at acpivga0 (LEGA, 0x0000): ACPI Display Output Device [ 1.001178] acpiout2 at acpivga0 (VGA0, 0x0100): ACPI Display Output Device [ 1.001178] acpiout3 at acpivga0 (TV0, 0x0240): ACPI Display Output Device [ 1.001178] acpiout4 at acpivga0 (LCD0, 0x0410): ACPI Display Output Device [ 1.001178] acpiout4: brightness levels: [2,4-5,7,9,11,13,18,20,24,29,33,40,50,67,100] [ 1.001178] acpivga0: connected output devices: [ 1.001178] acpivga0: 0x0100 (acpiout2): VGA Analog Monitor, index 0, port 0, head 0, bios detect [ 1.001178] acpivga0: 0x0240 (acpiout3): TV/HDTV Monitor, index 0, port 4, head 0, bios detect [ 1.001178] acpivga0: 0x0410 (acpiout4): Int. Digital Flat Panel, index 0, port 1, head 0, bios detect [ 1.001178] FWH (INT0800) at acpi0 not configured [ 1.001178] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 [ 1.001178] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.001178] pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 [ 1.001178] CTBL (BOOT0000) at acpi0 not configured [ 1.001178] ACPI: Enabled 1 GPEs in block 00 to 3F [ 1.001178] pckbd0 at pckbc1 (kbd slot) [ 1.001178] pckbc1: using irq 1 for kbd slot [ 1.001178] wskbd0 at pckbd0: console keyboard [ 1.001178] pms0 at pckbc1 (aux slot) [ 1.001178] pckbc1: using irq 12 for aux slot [ 1.001178] wsmouse0 at pms0 mux 0 [ 1.001178] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.001178] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.001178] pchb0 at pci0 dev 0 function 0: Intel 82GM45 Host Bridge (rev. 0x07) [ 1.001178] agp0 at pchb0: G4X-family chipset [ 1.001178] agp0: detected 261628k stolen memory [ 1.001178] agp0: aperture at 0x90000000, size 0x10000000 [ 1.001178] i915drmkms0 at pci0 dev 2 function 0: Intel 82GM45 Integrated Graphics Device (rev. 0x07) [ 1.001178] Intel 82GM45 Integrated Graphics Device (miscellaneous display, revision 0x07) at pci0 dev 2 function 1 not configured [ 1.001178] wm0 at pci0 dev 25 function 0, 64-bit DMA: 82801I mobile (AMT) LAN Controller (rev. 0x03) [ 1.001178] wm0: interrupting at msi0 vec 0 [ 1.001178] wm0: PCI-Express bus [ 1.001178] wm0: 2048 words FLASH, version 1.8.3 [ 1.001178] wm0: RX packet buffer size: 10KB [ 1.001178] wm0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.001178] wm0: 0x2a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL> [ 1.001178] makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1 [ 1.001178] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.001178] uhci0 at pci0 dev 26 function 0: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.001178] uhci0: interrupting at ioapic0 pin 16 [ 1.001178] usb0 at uhci0: USB revision 1.0 [ 1.001178] uhci1 at pci0 dev 26 function 1: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.001178] uhci1: interrupting at ioapic0 pin 17 [ 1.001178] usb1 at uhci1: USB revision 1.0 [ 1.001178] uhci2 at pci0 dev 26 function 2: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.001178] uhci2: interrupting at ioapic0 pin 18 [ 1.001178] usb2 at uhci2: USB revision 1.0 [ 1.001178] ehci0 at pci0 dev 26 function 7: Intel 82801I USB EHCI Controller (rev. 0x03) [ 1.001178] ehci0: 64-bit DMA [ 1.001178] ehci0: interrupting at ioapic0 pin 18 [ 1.001178] ehci0: EHCI version 1.0 [ 1.001178] ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2 [ 1.001178] ehci0: Using DMA subregion for control data structures [ 1.001178] usb3 at ehci0: USB revision 2.0 [ 1.001178] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller [ 1.001178] hdaudio0: interrupting at msi1 vec 0 [ 1.001178] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit [ 1.001178] hdafg0 at hdaudio0: Sigmatel 92HD71B7X [ 1.001178] hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack] [ 1.001178] hdafg0: ADC01 2ch: Mic In [Jack] [ 1.001178] hdafg0: DAC02 2ch: Speaker [Jack] [ 1.001178] hdafg0: ADC03 2ch: Mic In [Built-In] [ 1.001178] hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 [ 1.001178] audio0 at hdafg0: playback, capture, full duplex, independent [ 1.001178] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.001178] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [ 1.001178] spkr0 at audio0: PC Speaker (synthesized) [ 1.001178] wsbell at spkr0 not configured [ 1.001178] hdafg1 at hdaudio0: Intel G45 HDMI/2 [ 1.001178] hdafg1: HDMI00 8ch: Digital Out [Jack] [ 1.001178] hdafg1: 8ch/0ch 48000Hz PCM16* [ 1.001178] audio1 at hdafg1: playback, capture, full duplex, independent [ 1.001178] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.001178] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [ 1.001178] spkr1 at audio1: PC Speaker (synthesized) [ 1.001178] wsbell at spkr1 not configured [ 1.001178] ppb0 at pci0 dev 28 function 0: Intel 82801I PCI Express Port #1 (rev. 0x03) [ 1.001178] ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.001178] pci1 at ppb0 bus 1 [ 1.001178] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.001178] ppb1 at pci0 dev 28 function 1: Intel 82801I PCI Express Port #2 (rev. 0x03) [ 1.001178] ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.001178] pci2 at ppb1 bus 2 [ 1.001178] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.001178] iwn0 at pci2 dev 0 function 0: Intel WiFi Link 5100 (rev. 0x00) [ 1.001178] iwn0: interrupting at msi2 vec 0 [ 1.001178] iwn0: MIMO 1T2R, MoW, address [_MAC_XXXXXXXXXX] [ 1.001178] ppb2 at pci0 dev 28 function 2: Intel 82801I PCI Express Port #3 (rev. 0x03) [ 1.001178] ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.001178] pci3 at ppb2 bus 3 [ 1.001178] pci3: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.001178] ppb3 at pci0 dev 28 function 3: Intel 82801I PCI Express Port #4 (rev. 0x03) [ 1.001178] ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.001178] pci4 at ppb3 bus 4 [ 1.001178] pci4: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.001178] uhci3 at pci0 dev 29 function 0: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.001178] uhci3: interrupting at ioapic0 pin 16 [ 1.001178] usb4 at uhci3: USB revision 1.0 [ 1.001178] uhci4 at pci0 dev 29 function 1: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.001178] uhci4: interrupting at ioapic0 pin 17 [ 1.001178] usb5 at uhci4: USB revision 1.0 [ 1.001178] uhci5 at pci0 dev 29 function 2: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.001178] uhci5: interrupting at ioapic0 pin 18 [ 1.001178] usb6 at uhci5: USB revision 1.0 [ 1.001178] ehci1 at pci0 dev 29 function 7: Intel 82801I USB EHCI Controller (rev. 0x03) [ 1.001178] ehci1: 64-bit DMA [ 1.001178] ehci1: interrupting at ioapic0 pin 16 [ 1.001178] ehci1: EHCI version 1.0 [ 1.001178] ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5 [ 1.001178] ehci1: Using DMA subregion for control data structures [ 1.001178] usb7 at ehci1: USB revision 2.0 [ 1.001178] ppb4 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x93) [ 1.001178] pci5 at ppb4 bus 13 [ 1.001178] pci5: i/o space, memory space enabled [ 1.001178] cbb0 at pci5 dev 1 function 0: Ricoh 5C476 PCI-CardBus Bridge (rev. 0xba) [ 1.001178] fwohci0 at pci5 dev 1 function 1: Ricoh 5C832 PCI-SD/MMC/MMC+/MS/xD/Firewire (rev. 0x04) [ 1.001178] fwohci0: interrupting at ioapic0 pin 17 [ 1.001178] fwohci0: OHCI version 1.10 (ROM=0) [ 1.001178] fwohci0: No. of Isochronous channels is 4. [ 1.001178] fwohci0: EUI64 [_MAC_XXXXXXXXXX]:00:00 [ 1.001178] fwohci0: Phy 1394a available S400, 1 ports. [ 1.001178] fwohci0: Link S400, max_rec 2048 bytes. [ 1.001178] ieee1394if0 at fwohci0: IEEE1394 bus [ 1.001178] fwip0 at ieee1394if0: IP over IEEE1394 [ 1.001178] fwohci0: Initiate bus reset [ 1.001178] fwohci0: Clear PME# now [ 1.001178] sdhc0 at pci5 dev 1 function 2: Ricoh 5C822 PCI-CardBus Bridge/MS/SD/MMC/SC (rev. 0x21) [ 1.001178] sdhc0: interrupting at ioapic0 pin 18 [ 1.001178] sdhc0: SDHC 1.0, rev 4, caps <018021a1/00000000>, SDMA, 33000 kHz, 3.3V, 512 byte blocks [ 1.001178] sdmmc0 at sdhc0 slot 0 [ 1.001178] Ricoh 5C843 PCI-CardBus Bridge/SD/MMC/MMC+/MS/xD/Firewire (miscellaneous system, revision 0x11) at pci5 dev 1 function 3 not configured [ 1.001178] cbb0: cacheline 0x0 lattimer 0x40 [ 1.001178] cbb0: bhlc 0x824000 [ 1.001178] cbb0: interrupting at ioapic0 pin 19 [ 1.001178] cardslot0 at cbb0 [ 1.001178] cardbus0 at cardslot0: bus 14 [ 1.001178] pcmcia0 at cardslot0 [ 1.001178] ichlpcib0 at pci0 dev 31 function 0: Intel 82801IEM LPC Interface Bridge (rev. 0x03) [ 1.001178] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 [ 1.001178] ichlpcib0: 24-bit timer [ 1.001178] tco0 at ichlpcib0: TCO (watchdog) timer configured. [ 1.001178] tco0: Min/Max interval 1/367 seconds [ 1.001178] ahcisata0 at pci0 dev 31 function 2: Intel 82801I Mobile AHCI SATA Controller with 4 ports (rev. 0x03) [ 1.001178] ahcisata0: 64-bit DMA [ 1.001178] ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xff20ff83<CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A> [ 1.001178] ahcisata0: interrupting at msi3 vec 0 [ 1.001178] atabus0 at ahcisata0 channel 0 [ 1.001178] atabus1 at ahcisata0 channel 1 [ 1.001178] ichsmb0 at pci0 dev 31 function 3: Intel 82801I SMBus Controller (rev. 0x03) [ 1.001178] ichsmb0: interrupting at ioapic0 pin 18 [ 1.001178] iic0 at ichsmb0: I2C bus [ 1.001178] isa0 at ichlpcib0 [ 1.001178] tpm0 at isa0 iomem 0xfed40000-0xfed40fff irq 7 [ 1.001178] tpm0: device 0x200114e4 rev 0x30 [ 1.001178] pcppi0 at isa0 port 0x61 [ 1.001178] spkr2 at pcppi0: PC Speaker [ 1.001178] wsbell at spkr2 not configured [ 1.001178] midi0 at pcppi0: PC speaker [ 1.001178] sysbeep0 at pcppi0 [ 1.001178] attimer1: attached to pcppi0 [ 1.001178] acpicpu0 at cpu0: ACPI CPU [ 1.001178] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [ 1.001178] acpicpu0: C2: FFH, lat 1 us, pow 500 mW [ 1.001178] acpicpu0: C3: FFH, lat 55 us, pow 250 mW [ 1.001178] acpicpu0: P0: FFH, lat 1 us, pow 35000 mW, 2401 MHz, turbo boost [ 1.001178] acpicpu0: P1: FFH, lat 1 us, pow 35000 mW, 2400 MHz [ 1.001178] acpicpu0: P2: FFH, lat 1 us, pow 15000 mW, 1600 MHz [ 1.001178] acpicpu0: P3: FFH, lat 1 us, pow 12000 mW, 800 MHz [ 1.001178] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % [ 1.001178] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % [ 1.001178] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % [ 1.001178] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % [ 1.001178] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % [ 1.001178] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % [ 1.001178] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % [ 1.001178] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % [ 1.001178] coretemp0 at cpu0: thermal sensor, 1 C resolution [ 1.001178] coretemp0: autoconfiguration error: WARNING: Tjmax(0) retrieved was below expected range, using default (100). [ 1.001178] acpicpu1 at cpu1: ACPI CPU [ 1.001178] coretemp1 at cpu1: thermal sensor, 1 C resolution [ 1.001178] coretemp1: autoconfiguration error: WARNING: Tjmax(0) retrieved was below expected range, using default (100). [ 1.001178] fwohci0: BUS reset [ 1.001178] fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode [ 1.001178] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [ 1.001178] ieee1394if0: bus manager 0 [ 1.001178] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.001178] IPsec: Initialized Security Association Processing. [ 1.637013] tpm0: read 8 bytes, expected 10 [ 1.637013] tpm0: deactivating entropy source [ 1.637013] uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.637013] uhub0: 2 ports with 2 removable, self powered [ 1.637013] uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.637013] uhub1: 2 ports with 2 removable, self powered [ 1.637013] uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.637013] uhub2: 2 ports with 2 removable, self powered [ 1.637013] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.637013] uhub3: 6 ports with 6 removable, self powered [ 1.637013] uhub4 at usb4: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.637013] uhub4: 2 ports with 2 removable, self powered [ 1.637013] uhub5 at usb5: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.637013] uhub5: 2 ports with 2 removable, self powered [ 1.637013] uhub6 at usb6: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.637013] uhub6: 2 ports with 2 removable, self powered [ 1.637013] uhub7 at usb7: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.637013] uhub7: 6 ports with 6 removable, self powered [ 1.717004] ahcisata0 port 0: device present, speed: 3.0Gb/s [ 1.717004] ahcisata0 port 1: device present, speed: 1.5Gb/s [ 2.237004] wdc2 at pcmcia0 function 0: <TOSHIBA THNCF032MBA , , , > [ 2.237004] wdc2: i/o mapped mode [ 2.737004] atabus2 at wdc2 channel 0 [ 3.247004] wd0 at atabus0 drive 0 [ 3.247004] wd0: <WD Blue SA510 2.5 250GB> [ 3.247004] wd0: drive supports 1-sector PIO transfers, LBA48 addressing [ 3.247004] wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors [ 3.257004] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) [ 3.257004] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [ 3.257004] atapibus0 at atabus1: 1 targets [ 3.267004] cd0 at atapibus0 drive 0: <PLDS DVD+/-RW DU-8A2S, 910160407145, 4D13> cdrom removable [ 3.267004] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 3.267004] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) [ 3.677004] uhub8 at uhub0 port 1: Broadcom (0x0a5c) BCM2046B1 (0x4500), class 9/0, rev 2.00/1.00, addr 2 [ 3.697004] uhub8: 3 ports with 0 removable, self powered [ 4.217004] ugen0 at uhub2 port 1 [ 4.217004] ugen0: Broadcom Corp (0x0a5c) 5880 (0x5801), rev 1.10/1.01, addr 2 [ 4.577004] uhidev0 at uhub8 port 1 configuration 1 interface 0 [ 4.577004] uhidev0: vendor 413c (0x413c) product 8157 (0x8157), rev 2.00/1.00, addr 3, iclass 3/1 [ 4.587004] uhidev0: 1 report ids [ 4.587004] ukbd0 at uhidev0 reportid 1 [ 4.587004] wskbd1 at ukbd0 mux 1 [ 5.127004] uhidev1 at uhub8 port 2 configuration 1 interface 0 [ 5.127004] uhidev1: vendor 413c (0x413c) product 8158 (0x8158), rev 2.00/1.00, addr 4, iclass 3/1 [ 5.147004] uhidev1: 125 report ids [ 5.147004] ums0 at uhidev1 reportid 2: 3 buttons [ 5.147004] wsmouse1 at ums0 mux 0 [ 5.147004] uhid0 at uhidev1 reportid 125: input=2, output=0, feature=0 [ 5.937004] wd1 at atabus2 drive 0 [ 5.937004] wd1: <TOSHIBA THNCF032MBA> [ 5.937004] wd1: drive supports 1-sector PIO transfers, LBA addressing [ 5.937004] wd1: 31744 KB, 496 cyl, 4 head, 32 sec, 512 bytes/sect x 63488 sectors [ 6.457004] swwdog0: software watchdog initialized [ 10.937005] WARNING: 2 errors while detecting hardware; check system log. [ 10.937005] boot device: wd0 [ 10.937005] root on wd0a dumps on wd0b [ 10.937005] /: replaying log to memory [ 10.937005] root file system type: ffs [ 10.937005] kern.module.path=/stand/amd64/11.0/modules [ 10.997005] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.997005] [drm] Driver supports precise vblank timestamp query. [ 11.000565] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0) [ 11.017005] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0 [ 11.117006] intelfb0 at i915drmkms0 [ 11.117006] [drm] DRM_I915_DEBUG enabled [ 11.117006] [drm] DRM_I915_DEBUG_GEM enabled [ 11.117006] intelfb0: framebuffer at 0x90010000, size 1280x800, depth 32, stride 5120 [ 11.777005] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [ 11.827005] wsmux1: connecting to wsdisplay0 [ 11.827005] wskbd1: connecting to wsdisplay0 [ 11.847005] entropy: best effort [ 12.047007] /: replaying log to disk [ 46.977010] wsdisplay0: screen 1 added (default, vt100 emulation) [ 46.977010] wsdisplay0: screen 2 added (default, vt100 emulation) [ 46.977010] wsdisplay0: screen 3 added (default, vt100 emulation) [ 46.987011] wsdisplay0: screen 4 added (default, vt100 emulation)