Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-10-16 15:28:04
From: linear
Description: NetBSD/riscv 11.0 on StarFive VisionFive 2
[ 1.000000] ------------------------------------------ [ 1.000000] kern_vtopdiff = 0xffffffbf03200000 [ 1.000000] memory_start = 0x 40060000 [ 1.000000] memory_end = 0x 240000000 [ 1.000000] memory_size = 0x 1fffa0000 [ 1.000000] kernstart_phys = 0x fce00000 [ 1.000000] kernend_phys = 0x fd800000 [ 1.000000] msgbufaddr = 0xffffffe23fff0000 [ 1.000000] VM_MIN_KERNEL_ADDRESS = 0xffffffc000000000 [ 1.000000] kernstart_mega = 0xffffffc000000000 [ 1.000000] kernstart = 0xffffffc000000000 [ 1.000000] kernend = 0xffffffc000a00000 [ 1.000000] kernend_mega = 0xffffffc000a00000 [ 1.000000] VM_MAX_KERNEL_ADDRESS = 0xffffffd000000000 [ 1.000000] pmap_direct_base = 0xffffffe000000000 [ 1.000000] ------------------------------------------ [ 1.000000] adding 0x40060000 - 0xfce00000 to freelist 0 [ 1.000000] adding 0xfd800000 - 0xfda00000 to freelist 0 [ 1.000000] adding 0xfda0a000 - 0xfdeb9000 to freelist 0 [ 1.000000] adding 0xfdeba000 - 0xfe6ef000 to freelist 0 [ 1.000000] adding 0xfe6fc000 - 0xfe700000 to freelist 0 [ 1.000000] adding 0xfe723000 - 0xfe725000 to freelist 0 [ 1.000000] adding 0xfe726000 - 0xff75c000 to freelist 0 [ 1.000000] adding 0xff75d000 - 0xfff49000 to freelist 0 [ 1.000000] adding 0xfff4b000 - 0x23fff0000 to freelist 0 [ 1.000000] common cpusets bs_pde 0xffffffc00080b000 ASID max 0 kcpusets nkmempages limits: ffffffc004000000 - ffffffd000000000 [ 1.000000] kva : ffffffc004000000 - ffffffc2b9400000 [ 1.000000] mpstart [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024, 2025, 2026 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 11.0 (GENERIC64) #0: Thu Jul 30 15:23:12 UTC 2026 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/riscv/compile/GENERIC64 [ 1.000000] total memory = 8181 MB [ 1.000000] avail memory = 7912 MB [ 1.000000] entropy: ready [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root) [ 1.000000] simplebus0 at mainbus0: StarFive VisionFive 2 v1.3B [ 1.000000] simplebus1 at simplebus0 [ 1.000000] cpus0 at simplebus0 [ 1.000000] simplebus2 at simplebus0 [ 1.000000] cpu0 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.000000] cpu0: vendor 0x489 arch. 8000000000000007 imp. 4210427 [ 1.000000] cpu1 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.000000] cpu1: vendor 0x489 arch. 8000000000000007 imp. 4210427 [ 1.000000] cpu2 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.000000] cpu2: vendor 0x489 arch. 8000000000000007 imp. 4210427 [ 1.000000] cpu3 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.000000] cpu3: vendor 0x489 arch. 8000000000000007 imp. 4210427 [ 1.000000] intc0 at cpu0: local interrupt controller [ 1.000000] intc1 at cpu1: local interrupt controller [ 1.000000] intc2 at cpu2: local interrupt controller [ 1.000000] intc3 at cpu3: local interrupt controller [ 1.000000] fclock0 at simplebus0: 49152000 Hz fixed clock (tdm_ext) [ 1.000000] fclock1 at simplebus0: 12288000 Hz fixed clock (mclk_ext) [ 1.000000] fclock2 at simplebus0: 12288000 Hz fixed clock (i2srx_bclk_ext) [ 1.000000] fclock3 at simplebus0: 192000 Hz fixed clock (i2srx_lrck_ext) [ 1.000000] syscon0 at simplebus1: System Controller Registers [ 1.000000] jh7110syscon0 at simplebus1: JH7110 STG system controller [ 1.000000] fclock4 at simplebus0: 24000000 Hz fixed clock (osc) [ 1.000000] fclock5 at simplebus0: 12288000 Hz fixed clock (i2stx_bclk_ext) [ 1.000000] fclock6 at simplebus0: 192000 Hz fixed clock (i2stx_lrck_ext) [ 1.000000] fclock7 at simplebus0: 50000000 Hz fixed clock (gmac1_rmii_refin) [ 1.000000] fclock8 at simplebus0: 125000000 Hz fixed clock (gmac1_rgmii_rxin) [ 1.000000] syscon1 at simplebus1: System Controller Registers [ 1.000000] fclock9 at simplebus0: 50000000 Hz fixed clock (gmac0_rmii_refin) [ 1.000000] fclock10 at simplebus0: 125000000 Hz fixed clock (gmac0_rgmii_rxin) [ 1.000000] fclock11 at simplebus0: 32768 Hz fixed clock (rtc_osc) [ 1.000000] fclock12 at simplebus0: 74250000 Hz fixed clock (dvp_clk) [ 1.000000] fclock13 at simplebus0: 297000000 Hz fixed clock (hdmitx0_pixelclk) [ 1.000000] jh7110clkc0 at simplebus1: JH7110 System Clock and Reset Generator [ 1.000000] plic0 at simplebus1 [ 1.000000] plic0: inactive HART for PLIC for context 0 [ 1.000000] plic0: interrupt cpu1/Machine external #11 handler installed [ 1.000000] plic0: interrupt cpu1/Supervisor external #9 handler installed [ 1.000000] plic0: hart 1 context 2 [ 1.000000] plic0: interrupt cpu2/Machine external #11 handler installed [ 1.000000] plic0: interrupt cpu2/Supervisor external #9 handler installed [ 1.000000] plic0: hart 2 context 4 [ 1.000000] plic0: interrupt cpu3/Machine external #11 handler installed [ 1.000000] plic0: interrupt cpu3/Supervisor external #9 handler installed [ 1.000000] plic0: hart 3 context 6 [ 1.000000] plic0: interrupt cpu0/Machine external #11 handler installed [ 1.000000] plic0: interrupt cpu0/Supervisor external #9 handler installed [ 1.000000] plic0: hart 4 context 8 [ 1.000000] plic0: attaching: RISC-V PLIC (136 IRQs) [ 1.000000] jh7110pinctrl0 at simplebus1: Pin Controller [ 1.000000] jh7110clkc1 at simplebus1: JH7110 System-Top-Group Clock and Reset Generator [ 1.000000] jh7110clkc2 at simplebus1: JH7110 Always-On Clock and Reset Generator [ 1.000000] jh7110pinctrl1 at simplebus1: Pin Controller [ 1.000000] jh7110clkc3 at simplebus1: JH7110 Video Output Clock and Reset Generator [ 1.000000] jh7110pciephy0 at simplebus1: JH7110 PCIe PHY [ 1.000000] jh7110pciephy1 at simplebus1: JH7110 PCIe PHY [ 1.000000] ccache0 at simplebus1: L2 cache controller. 2048 KiB/64B 16-way (2048 set). [ 1.000000] ccache0: No. of banks 8 [ 1.000000] ccache0: No. of ways per bank 16 [ 1.000000] ccache0: Sets per bank 256 [ 1.000000] ccache0: Bytes per cache block 64 [ 1.000000] ccache0: Largest way enabled 15 [ 1.000000] /opp-table-0 at simplebus0 not configured [ 1.000000] dwiic0 at simplebus1: I2C controller [ 1.000000] dwiic0: interrupting on plic0 irq 50 [ 1.000000] iic0 at dwiic0: I2C bus [ 1.000000] pmic (x-powers,axp15060) at iic0 addr 0x36 not configured [ 1.000000] jh71x0temp0 at simplebus1: JH71x0 temperature sensor [ 1.000000] /soc/dma-controller@16050000 at simplebus1 not configured [ 1.000000] /soc/phy@10200000 at simplebus1 not configured [ 1.000000] /soc/syscon@13030000/clock-controller at syscon0 not configured [ 1.000000] /soc/dma-controller@16008000 at simplebus1 not configured [ 1.000000] eqos0 at simplebus1: DesignWare EQOS ver 0x52 (0x41) [ 1.000000] eqos0: hw features 1a2173f7 09845904 01000000 00000000 [ 1.000000] eqos0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] mcommphy0 at eqos0 phy 0: Motorcomm YT8531 GbE PHY [ 1.000000] mcommphy0: motorcomm,tx-clk-adj-enabled is true [ 1.000000] mcommphy0: motorcomm,tx-clk-100-inverted is true [ 1.000000] mcommphy0: motorcomm,tx-clk-1000-inverted is true [ 1.000000] mcommphy0: rx-clk-drv-microamp is 3970 [ 1.000000] mcommphy0: motorcomm,rx-data-drv-microamp is 2910 [ 1.000000] mcommphy0: rx-internal-delay-ps is 1500 [ 1.000000] mcommphy0: tx-internal-delay-ps is 1500 [ 1.000000] mcommphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.000000] eqos0: interrupting on plic0 irq 7 [ 1.000000] eqos1 at simplebus1: DesignWare EQOS ver 0x52 (0x41) [ 1.000000] eqos1: hw features 1a2173f7 09845904 01000000 00000000 [ 1.000000] eqos1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] mcommphy1 at eqos1 phy 0: Motorcomm YT8531 GbE PHY [ 1.000000] mcommphy1: motorcomm,tx-clk-adj-enabled is true [ 1.000000] mcommphy1: motorcomm,tx-clk-100-inverted is true [ 1.000000] mcommphy1: rx-clk-drv-microamp is 3970 [ 1.000000] mcommphy1: motorcomm,rx-data-drv-microamp is 2910 [ 1.000000] mcommphy1: rx-internal-delay-ps is 300 [ 1.000000] mcommphy1: tx-internal-delay-ps is 0 [ 1.000000] mcommphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.000000] eqos1: interrupting on plic0 irq 78 [ 1.000000] /soc/clock-controller@19810000 at simplebus1 not configured [ 1.000000] /soc/phy@19820000 at simplebus1 not configured [ 1.000000] /soc/isp@19840000 at simplebus1 not configured [ 1.000000] /soc/power-controller@17030000 at simplebus1 not configured [ 1.000000] /soc/csi@19800000 at simplebus1 not configured [ 1.000000] jh7110pcie0 at simplebus1: PCIe [ 1.000000] jh7110pcie0: interrupting on plic0 irq 56 [ 1.000000] jh7110pcie0: MMIO (32-bit non-prefetchable): 0x0000000030000000 + 0x0000000008000000 @ 0x0000000030000000 [ 1.000000] jh7110pcie0: MMIO (64-bit prefetchable) : 0x0000000900000000 + 0x0000000040000000 @ 0x0000000900000000 [ 1.000000] pci0 at jh7110pcie0 bus 0 [ 1.000000] pci0: memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000000] ppb0 at pci0 dev 0 function 0: vendor 1556 product 1111 (rev. 0x02) [ 1.000000] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.000000] pci1 at ppb0 bus 1 [ 1.000000] pci1: memory space enabled, rd/line, wr/inv ok [ 1.000000] xhci0 at pci1 dev 0 function 0: vendor 1106 product 3483 (rev. 0x01) [ 1.000000] xhci0: 64-bit DMA [ 1.000000] xhci0: interrupting at plic0 irq 56 [ 1.000000] xhci0: xHCI version 1.0 [ 1.000000] usb0 at xhci0: USB revision 3.0 [ 1.000000] usb1 at xhci0: USB revision 2.0 [ 1.000000] jh7110pcie1 at simplebus1: PCIe [ 1.000000] jh7110pcie1: interrupting on plic0 irq 57 [ 1.000000] jh7110pcie1: MMIO (32-bit non-prefetchable): 0x0000000038000000 + 0x0000000008000000 @ 0x0000000038000000 [ 1.000000] jh7110pcie1: MMIO (64-bit prefetchable) : 0x0000000980000000 + 0x0000000040000000 @ 0x0000000980000000 [ 1.000000] pci2 at jh7110pcie1 bus 0 [ 1.000000] pci2: memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000000] ppb1 at pci2 dev 0 function 0: vendor 1556 product 1111 (rev. 0x02) [ 1.000000] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.000000] pci3 at ppb1 bus 1 [ 1.000000] pci3: memory space enabled, rd/line, wr/inv ok [ 1.000000] nvme0 at pci3 dev 0 function 0: vendor 1e0f product 0001 (rev. 0x00) [ 1.000000] nvme0: NVMe 1.3 [ 1.000000] nvme0: interrupting at plic0 irq 57 [ 1.000000] nvme0: KBG40ZNS256G NVMe KIOXIA 256GB, firmware 10410104, serial [REDACTED] [ 1.000000] ld4 at nvme0 nsid 1 [ 1.000000] ld4: 238 GB, 31130 cyl, 255 head, 63 sec, 512 bytes/sect x 500118192 sectors (0 bytes/physsect) [ 1.000000] /sound at simplebus0 not configured [ 1.000000] /soc/pwmdac@100b0000 at simplebus1 not configured [ 1.000000] /audio-codec at simplebus0 not configured [ 1.000000] /soc/timer@2000000 at simplebus1 not configured [ 1.000000] com0 at simplebus1: DesignWare APB UART, no fifo [ 1.000000] com0: console [ 1.000000] com0: interrupting on plic0 irq 32 [ 1.000000] dwiic1 at simplebus1: I2C controller [ 1.000000] dwiic1: interrupting on plic0 irq 35 [ 1.000000] iic1 at dwiic1: I2C bus [ 1.000000] dwiic2 at simplebus1: I2C controller [ 1.000000] dwiic2: interrupting on plic0 irq 37 [ 1.000000] iic2 at dwiic2: I2C bus [ 1.000000] /soc/spi@10060000 at simplebus1 not configured [ 1.000000] jh71x0usb0 at simplebus1: USB [ 1.000000] dwiic3 at simplebus1: I2C controller [ 1.000000] dwiic3: interrupting on plic0 irq 51 [ 1.000000] iic3 at dwiic3: I2C bus [ 1.000000] /soc/pwm@120d0000 at simplebus1 not configured [ 1.000000] /soc/spi@13010000 at simplebus1 not configured [ 1.000000] /soc/crypto@16000000 at simplebus1 not configured [ 1.000000] jh7110trng0 at simplebus1: JH7110 TRNG [ 1.000000] jh7110trng0: Features : 0xd<mode reset state=0x1=mission mode,ring oscillator=0x1=present,max rand length=0x1=256-bit> [ 1.000000] jh7110trng0: Build config: 0x3d<auto reseed loopback=0x1=present,mode after reset=0x1=mission mode,PRNG after reset=0x1=present,max PRNG length=0x1=256-bit> [ 1.000000] jh7110trng0: interrupting on plic0 irq 30 [ 1.000000] dwcmmc0 at simplebus1: DesignWare SD/MMC [ 1.000000] dwcmmc0: interrupting on plic0 irq 74 [ 1.000000] dwcmmc1 at simplebus1: DesignWare SD/MMC [ 1.000000] dwcmmc1: interrupting on plic0 irq 75 [ 1.000000] /gpio-restart at simplebus0 not configured [ 1.000000] /soc/watchdog@13070000 at simplebus1 not configured [ 1.000000] xhci1 at simplebus1autoconfiguration error: : cannot switch 'otg' mode to host [ 1.000000] /opp-table-0 at simplebus0 not configured [ 1.000000] /soc/dma-controller@16050000 at simplebus1 not configured [ 1.000000] /soc/phy@10200000 at simplebus1 not configured [ 1.000000] /soc/syscon@13030000/clock-controller at syscon0 not configured [ 1.000000] /soc/dma-controller@16008000 at simplebus1 not configured [ 1.000000] /soc/clock-controller@19810000 at simplebus1 not configured [ 1.000000] /soc/phy@19820000 at simplebus1 not configured [ 1.000000] /soc/isp@19840000 at simplebus1 not configured [ 1.000000] /soc/power-controller@17030000 at simplebus1 not configured [ 1.000000] /soc/csi@19800000 at simplebus1 not configured [ 1.000000] /sound at simplebus0 not configured [ 1.000000] /soc/pwmdac@100b0000 at simplebus1 not configured [ 1.000000] /audio-codec at simplebus0 not configured [ 1.000000] /soc/timer@2000000 at simplebus1 not configured [ 1.000000] /soc/spi@10060000 at simplebus1 not configured [ 1.000000] /soc/pwm@120d0000 at simplebus1 not configured [ 1.000000] /soc/spi@13010000 at simplebus1 not configured [ 1.000000] /soc/crypto@16000000 at simplebus1 not configured [ 1.000000] /gpio-restart at simplebus0 not configured [ 1.000000] /soc/watchdog@13070000 at simplebus1 not configured [ 1.000000] timecounter: Timecounter "riscv" frequency 4000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.779984] cpu_boot_secondary_processors: starting secondary processors [ 1.790925] cpu_boot_secondary_processors: secondary processors hatched. 4 running [ 1.790925] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.799982] uhub0: 4 ports with 4 removable, self powered [ 1.799982] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.809978] uhub1: 1 port with 1 removable, self powered [ 1.809978] sdmmc0 at dwcmmc0 [ 1.819978] sdmmc1 at dwcmmc1 [ 1.829984] IPsec: Initialized Security Association Processing. [ 1.959976] ld0 at sdmmc0: <0x88:0x0103:D9D16G:0x00:0x210db323:0x000> [ 1.969976] ld0: 14800 MB, 7517 cyl, 64 head, 63 sec, 512 bytes/sect x 30310400 sectors (0 bytes/physsect) [ 1.979976] ld0: GPT GUID: 93b7b000-8c2a-11f1-8000-000000000000 [ 1.979976] dk0 at ld0: "EFI", 163840 blocks at 32768, type: msdos [ 1.989977] dk1 at ld0: "netbsd-root", 30105600 blocks at 196608, type: ffs [ 1.989977] ld0: 8-bit width, 64 MB cache, 52.000 MHz [ 2.259976] uhub2 at uhub1 port 1: vendor 2109 (0x2109) USB2.0 Hub (0x3431), class 9/0, rev 2.10/4.20, addr 1 [ 2.269978] uhub2: single transaction translator [ 2.269978] uhub2: 4 ports with 4 removable, self powered [ 2.609977] swwdog0: software watchdog initialized [ 2.609977] WARNING: 1 error while detecting hardware; check system log. [ 2.619977] boot device: dk1 [ 2.629977] root on dk1 [ 2.639981] root file system type: ffs [ 2.639981] kern.module.path=/stand/riscv/11.0/modules [ 2.649978] WARNING: no TOD clock present [ 2.649978] WARNING: using filesystem time [ 2.660462] WARNING: CHECK AND RESET THE DATE!