Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-10-20 20:38:27
From: linear
Description: NetBSD/i386 11.0 on Soekris Net4801 (custom kernel)
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024, 2025, 2026 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 11.0 (NET4801) #6: Tue Oct 20 16:26:08 EDT 2026 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/home/linear/obj/sys/arch/i386/compile/NET4801 [ 1.000000] total memory = 255 MB [ 1.000000] avail memory = 244 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] timecounter: Timecounter "i8254" frequency 1189200 Hz quality 100 [ 1.000003] mainbus0 (root) [ 1.000003] cpu0 at mainbus0 [ 1.000003] cpu0: Use cpuid to serialize rdtsc [ 1.000003] cpu0: Geode(TM) Integrated Processor by National Semi, id 0x540 [ 1.000003] cpu0: node 0, package 0, core 0, smt 0 [ 1.000003] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.000003] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000003] pchb0 at pci0 dev 0 function 0: Cyrix MediaGX Built-in PCI Host Controller (rev. 0x00) [ 1.000003] sip0 at pci0 dev 6 function 0: NatSemi DP83815 10/100 Ethernet, rev 00 [ 1.000003] sip0: interrupting at irq 10 [ 1.000003] sip0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000003] nsphyter0 at sip0 phy 0: DP83815/DP83846A 10/100 media interface, rev. 1 [ 1.000003] nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000003] sip1 at pci0 dev 7 function 0: NatSemi DP83815 10/100 Ethernet, rev 00 [ 1.000003] sip1: interrupting at irq 10 [ 1.000003] sip1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000003] nsphyter1 at sip1 phy 0: DP83815/DP83846A 10/100 media interface, rev. 1 [ 1.000003] nsphyter1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000003] sip2 at pci0 dev 8 function 0: NatSemi DP83815 10/100 Ethernet, rev 00 [ 1.000003] sip2: interrupting at irq 10 [ 1.000003] sip2: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000003] nsphyter2 at sip2 phy 0: DP83815/DP83846A 10/100 media interface, rev. 1 [ 1.000003] nsphyter2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000003] ppb0 at pci0 dev 10 function 0: Texas Instruments product ac23 (rev. 0x02) [ 1.000003] pci1 at ppb0 bus 1 [ 1.000003] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.000003] sip3 at pci1 dev 0 function 0: NatSemi DP83815 10/100 Ethernet, rev 00 [ 1.000003] sip3: interrupting at irq 9 [ 1.000003] sip3: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000003] nsphyter3 at sip3 phy 0: DP83815/DP83846A 10/100 media interface, rev. 1 [ 1.000003] nsphyter3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000003] sip4 at pci1 dev 1 function 0: NatSemi DP83815 10/100 Ethernet, rev 00 [ 1.000003] sip4: interrupting at irq 5 [ 1.000003] sip4: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000003] nsphyter4 at sip4 phy 0: DP83815/DP83846A 10/100 media interface, rev. 1 [ 1.000003] nsphyter4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000003] sip5 at pci1 dev 2 function 0: NatSemi DP83815 10/100 Ethernet, rev 00 [ 1.000003] sip5: interrupting at irq 9 [ 1.000003] sip5: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000003] nsphyter5 at sip5 phy 0: DP83815/DP83846A 10/100 media interface, rev. 1 [ 1.000003] nsphyter5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000003] sip6 at pci1 dev 3 function 0: NatSemi DP83815 10/100 Ethernet, rev 00 [ 1.000003] sip6: interrupting at irq 5 [ 1.000003] sip6: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000003] nsphyter6 at sip6 phy 0: DP83815/DP83846A 10/100 media interface, rev. 1 [ 1.000003] nsphyter6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000003] hifn0 at pci0 dev 14 function 0: Hifn 7955 (rev. 0x00) [ 1.000003] hifn0: 3DES/AES, 32KB DRAM, interrupting at irq 11 [ 1.000003] gscpcib0 at pci0 dev 18 function 0: National Semiconductor SC1100 PCI-ISA Bridge (rev. 0x00) [ 1.000003] gpio0 at gscpcib0: 64 pins [ 1.000003] National Semiconductor SC1100 SMI/ACPI (miscellaneous bridge) at pci0 dev 18 function 1 not configured [ 1.000003] geodeide0 at pci0 dev 18 function 2: AMD Geode SC1100 IDE controller (rev. 0x01) [ 1.000003] geodeide0: bus-master DMA support present [ 1.000003] geodeide0: primary channel wired to compatibility mode [ 1.000003] geodeide0: primary channel interrupting at irq 14 [ 1.000003] atabus0 at geodeide0 channel 0 [ 1.000003] geodeide0: secondary channel wired to compatibility mode [ 1.000003] geodeide0: secondary channel interrupting at irq 15 [ 1.000003] atabus1 at geodeide0 channel 1 [ 1.000003] geodegcb0 at pci0 dev 18 function 5: AMD Geode GCB (rev. 0x03) [ 1.000003] geodewdog0 at geodegcb0: AMD Geode SC1100 Watchdog Timer [ 1.000003] geodecntr0 at geodegcb0: AMD Geode SC1100 27MHz Counter [ 1.000003] timecounter: Timecounter "geodecounter" frequency 27000000 Hz quality 1000 [ 1.008473] ohci0 at pci0 dev 19 function 0: Compaq USB Controller (rev. 0x08) [ 1.008473] ohci0: interrupting at irq 5 [ 1.008473] ohci0: OHCI version 1.0, legacy support [ 1.008473] usb0 at ohci0: USB revision 1.0 [ 1.008473] isa at gscpcib0 not configured [ 1.008473] isa0 at mainbus0 [ 1.008473] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.008473] com0: console [ 1.008473] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO [ 1.008473] nsclpcsio0 at isa0 port 0x2e-0x2f: NSC PC87366 rev. 9 GPIO VLM TMS [ 1.008473] gpio1 at nsclpcsio0: 29 pins [ 1.353251] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.388589] IPsec: Initialized Security Association Processing. [ 1.398549] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.418195] uhub0: 3 ports with 3 removable, self powered [ 4.458222] wd0 at atabus0 drive 0 [ 4.470653] wd0: <ST660211CF> [ 4.479674] wd0: drive supports 16-sector PIO transfers, LBA addressing [ 4.479674] wd0: 5722 MB, 11626 cyl, 16 head, 63 sec, 512 bytes/sect x 11719008 sectors [ 4.498104] wd0: 32-bit data port [ 4.498104] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) [ 4.508083] wd0(geodeide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 4.518070] swwdog0: software watchdog initialized [ 5.823627] boot device: wd0 [ 5.836119] root on wd0a dumps on wd0b [ 5.893393] root file system type: ffs [ 5.913346] kern.module.path=/stand/i386/11.0/modules