Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-10-22 19:55:19
From: Technoid Mutant
Description: Alphastation ev6@466mhz SATA controller, NetBSD 10.1
Webbrick is the same machine as Alphastation I posted a few months ago.
I noticed my posted dmesg was truncated due to errors from the onboard ata controller overflowing it's buffer.
In the interim I swapped the Esata controller for an internal 32bit Sata controller, for a 5% dip in performance (I gain an INTERNAL drive). Also, I borrowed a half gig of Webbrick's original 2gig, to upgrade my other Alpha to 1gig...
************************************************************************************************************************
Here is a complete system report from RMC to a serial login.
************************************************************************************************************************
Welcome to minicom 2.10
OPTIONS: I18n
Port /home/technoid/ttyWebbrick, 15:40:53 [U]
Press CTRL-A Z for help on special keys
RMC>power on
*** keyboard not plugged in...
1536 Meg of system memory
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
slot 1 -- DE200-LE
bus 0, slot 9 -- ewa -- DE500-BA Network Controller
bus 0, slot 11 -- ewb -- DE500-BA Network Controller
bus 0, slot 13 -- dqa -- Acer Labs M1543C IDE
bus 0, slot 13 -- dqb -- Acer Labs M1543C IDE
initializing GCT/FRU at 1fe000
System Temperature is 31 degrees C
Webbrick -- Webbrick == Webbrick Console V7.3-1, Feb 27 2007 13:17:58
CPU 0 booting
(boot dqa0.0.0.13.0 -file netbsd -flags A)
block 0 of dqa0.0.0.13.0 is a valid boot block
reading 13 blocks from dqa0.0.0.13.0
bootstrap code read in
base = 2c2000, image_start = 0, image_bytes = 1a00(6656)
initializing HWRPB at 2000
initializing page table at 5ffea000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
NetBSD/alpha 10.1 ISO 9660 Primary Bootstrap
Jumping to entry point...
NetBSD/alpha 10.1 Secondary Bootstrap, Revision 1.13 (Mon Dec 16 13:08:11 UTC 2024)
VMS PAL rev: 0x1005300010162
OSF PAL rev: 0x100490002015c
Switch to OSF PAL code succeeded.
Boot file: netbsd
Boot flags: A
13447600\
halted CPU 0
halt code = 5
HALT instruction executed
PC = 2000404c
boot failure
Alphabox>Alphabox>^C
Alphabox>^C
Alphabox>^X
Alphabox>^C
Alphabox>show
auto_action BOOT
boot_dev dqa0.0.0.13.0
boot_file netbsd
boot_osflags A
boot_reset OFF
bootbios
bootdef_dev dqa0.0.0.13.0
booted_dev dqa0.0.0.13.0
booted_file netbsd
booted_osflags A
char_set 0
com1_baud 9600
com1_flow SOFTWARE
com1_mode SNOOP
com1_modem OFF
com2_baud 9600
com2_flow SOFTWARE
com2_modem OFF
console serial
console_memory_allocation new
controlp ON
d_bell off
d_cleanup on
d_complete off
d_eop off
d_group field
d_harderr halt
d_loghard on
d_logsoft off
d_omit
d_oper on
d_passes 1
d_quick off
d_report full
d_runtime 0
d_softerr continue
d_startup off
d_status off
d_trace off
d_verbose 0
dump_dev
enable_audit ON
ewa0_arp_tries 3
ewa0_bootp_file bootp/netbsd.INSTALL
ewa0_bootp_server [_IP_XXXXXXX]
ewa0_bootp_tries 3
ewa0_def_ginetaddr [_IP_XX]
ewa0_def_inetaddr [_IP_XXXXXXXX]
ewa0_def_inetfile bootp/netbsd.INSTALL
ewa0_def_sinetaddr [_IP_XXXXXXX]
ewa0_def_subnetmask [_IP_XXXXXXXX]
ewa0_ginetaddr [_IP_XX]
ewa0_inet_init nvram
ewa0_inetaddr [_IP_XX]
ewa0_inetfile
ewa0_loop_count 3e8
ewa0_loop_inc a
ewa0_loop_patt ffffffffffffffff
ewa0_loop_size 2e
ewa0_lp_msg_node 1
ewa0_mode Full Duplex, Twisted-Pair
ewa0_protocols BOOTP
ewa0_sinetaddr [_IP_XX]
ewa0_tftp_blocksize 512
ewa0_tftp_tries 3
ewb0_arp_tries 3
ewb0_bootp_file
ewb0_bootp_server
ewb0_bootp_tries 3
ewb0_def_ginetaddr [_IP_XX]
ewb0_def_inetaddr [_IP_XX]
ewb0_def_inetfile
ewb0_def_sinetaddr [_IP_XX]
ewb0_def_subnetmask [_IP_XX]
ewb0_ginetaddr [_IP_XX]
ewb0_inet_init bootp
ewb0_inetaddr [_IP_XX]
ewb0_inetfile
ewb0_loop_count 3e8
ewb0_loop_inc a
ewb0_loop_patt ffffffffffffffff
ewb0_loop_size 2e
ewb0_lp_msg_node 1
ewb0_mode Full Duplex, Twisted-Pair
ewb0_protocols MOP
ewb0_sinetaddr [_IP_XX]
ewb0_tftp_blocksize 1024
ewb0_tftp_tries 3
exdep_data 1F
exdep_location 1
exdep_size 1
exdep_space iic_rcm_temp
exdep_type 0
ffauto OFF
ffnext OFF
full_powerup_diags OFF
heap_expand NONE
kbd_hardware_type PCXAL
language 36
language_name English (American)
license MU
memory_test full
mfg_status 1a28e8
N1
N10
N11
N12
N13
N14
N15
N16
N2
N3
N4
N5
N6
N7
N8
N9
oem_string Webbrick -- Webbrick == Webbrick
os_type UNIX
page_table_levels 3
pal OpenVMS PALcode V1.98-83, Tru64 UNIX PALcode V1.92-73
pci_parity OFF
prefetch_mode ON
prompt Alphabox>
reset_boot_arg0 0
reset_boot_arg1
reset_boot_arg2
rmc_halt ENABLED
scsi_poll OFF
scsi_reset OFF
shutdown_temp 70
srm2ctrl
srm2dev
sys_serial_num 4003DQMZ1034
tt_allow_login 1
tty_dev 0
user_def1
user_def2
version V7.3-1 Feb 27 2007 13:17:58
wwid0
wwid1
wwid2
wwid3
wwid4
wwid5
wwid6
wwid7
Alphabox>n
n: No such command
Alphabox>b
(boot dqa0.0.0.13.0 -file netbsd -flags A)
block 0 of dqa0.0.0.13.0 is a valid boot block
reading 13 blocks from dqa0.0.0.13.0
bootstrap code read in
base = 2c2000, image_start = 0, image_bytes = 1a00(6656)
initializing HWRPB at 2000
initializing page table at 5ffea000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
NetBSD/alpha 10.1 ISO 9660 Primary Bootstrap
Jumping to entry point...
NetBSD/alpha 10.1 Secondary Bootstrap, Revision 1.13 (Mon Dec 16 13:08:11 UTC 2024)
VMS PAL rev: 0x1005300010162
OSF PAL rev: 0x100490002015c
Switch to OSF PAL code succeeded.
Boot file: netbsd
Boot flags: A
13447600+232480 [646560+420884]=0xe10f40
Entering netbsd at 0xfffffc0000a01410...
[ 1.0000000] consinit: not using prom console
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 10.1 (ALPHABOX-OPTIMIZED) #0: Thu Aug 6 17:59:00 EST 2026
[ 1.0000000] [_EMAIL_XXXXXXXXXXXXX]:/usr/src/sys/arch/alpha/compile/ALPHABOX
[ 1.0000000] AlphaServer DS10 466 MHz, s/n 4003DQMZ10
[ 1.0000000] 8192 byte page size, 1 processor.
[ 1.0000000] total memory = 1536 MB
[ 1.0000000] (2920 KB reserved for PROM, 1533 MB used by NetBSD)
[ 1.0000000] avail memory = 1497 MB
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264-4 (EV6)
[ 1.0000000] cpu0: Architecture extensions: 0x303<PAT,MVI,FIX,BWX>
[ 1.0000000] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
[ 1.0000000] tsc0: 2 Dchips, 1 memory bus of 16 bytes
[ 1.0000000] tsc0: arrays present: 1024MB, 512MB (split), 0MB, 0MB, Dchip 0 rev 1
[ 1.0000000] tsp0 at tsc0
[ 1.0000000] pci0 at tsp0 bus 0
[ 1.0000000] sio0 at pci0 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge (rev. 0xc3)
[ 1.0000000] tlp0 at pci0 dev 9 function 0: DECchip 21143 Ethernet, pass 4.1
[ 1.0000000] tlp0: interrupting at dec 6600 irq 29
[ 1.0000000] tlp0: DEC, Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0000000] tlp1 at pci0 dev 11 function 0: DECchip 21143 Ethernet, pass 4.1
[ 1.0000000] tlp1: interrupting at dec 6600 irq 30
[ 1.0000000] tlp1: DEC, Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] tlp1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0000000] aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1)
[ 1.0000000] aceride0: primary channel interrupting at isa irq 14
[ 1.0000000] atabus0 at aceride0 channel 0
[ 1.0000000] aceride0: secondary channel interrupting at isa irq 15
[ 1.0000000] atabus1 at aceride0 channel 1
[ 1.0000000] siisata0 at pci0 dev 14 function 0: CMD Technology SiI3124 SATALink (rev. 0x01)
[ 1.0000000] siisata0: interrupting at dec 6600 irq 35
[ 1.0000000] atabus2 at siisata0 channel 0
[ 1.0000000] atabus3 at siisata0 channel 1
[ 1.0000000] atabus4 at siisata0 channel 2
[ 1.0000000] atabus5 at siisata0 channel 3
[ 1.0000000] vga0 at pci0 dev 15 function 0: 3Dfx Interactive Voodoo3 (rev. 0x01)
[ 1.0000000] wsdisplay1 at vga0 kbdmux 1
[ 1.0000000] drm at vga0 not configured
[ 1.0000000] ohci0 at pci0 dev 16 function 0: NEC USB Host Controller (rev. 0x43)
[ 1.0000000] ohci0: interrupting at dec 6600 irq 43
[ 1.0000000] ohci0: OHCI version 1.0
[ 1.0000000] usb0 at ohci0: USB revision 1.0
[ 1.0000000] ohci1 at pci0 dev 16 function 1: NEC USB Host Controller (rev. 0x43)
[ 1.0000000] ohci1: interrupting at dec 6600 irq 42
[ 1.0000000] ohci1: OHCI version 1.0
[ 1.0000000] usb1 at ohci1: USB revision 1.0
[ 1.0000000] ehci0 at pci0 dev 16 function 2: NEC USB2 Host Controller (rev. 0x04)
[ 1.0000000] ehci0: interrupting at dec 6600 irq 41
[ 1.0000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
[ 1.0000000] usb2 at ehci0: USB revision 2.0
[ 1.0000000] wm0 at pci0 dev 17 function 0: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
[ 1.0000000] wm0: interrupting at dec 6600 irq 47
[ 1.0000000] wm0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
[ 1.0000000] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] wm1 at pci0 dev 17 function 1: Intel i82546EB 1000BASE-T Ethernet (rev. 0x01)
[ 1.0000000] wm1: interrupting at dec 6600 irq 46
[ 1.0000000] wm1: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
[ 1.0000000] makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] isa0 at sio0
[ 1.0000000] lpt0 at isa0 port 0x3bc-0x3bf irq 7
[ 1.0000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
[ 1.0000000] com0: console
[ 1.0000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
[ 1.0000000] pckbc0 at isa0 port 0x60-0x64
[ 1.0000000] attimer0 at isa0 port 0x40-0x43
[ 1.0000000] pcppi0 at isa0 port 0x61
[ 1.0000000] spkr0 at pcppi0: PC Speaker
[ 1.0000000] wsbell at spkr0 not configured
[ 1.0000000] midi0 at pcppi0: PC speaker
[ 1.0000000] isabeep0 at pcppi0
[ 1.0000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[ 1.0000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
[ 1.0000000] attimer0: attached to pcppi0
[ 1.0000000] tsciic0 at tsc0
[ 1.0000000] iic0 at tsciic0: I2C bus
[ 1.0000000] WARNING: system needs entropy for security; see entropy(7)
[ 1.0140805] stray isa irq 15
[ 1.0467077] stray isa irq 15
[ 1.1049078] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.2114564] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.3197716] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.4974838] siisata0 port 0: device present, speed: 3.0Gb/s
[ 2.0511959] ehci0: handing over full speed device on port 1 to ohci0
[ 3.1244474] uaudio0 at uhub0 port 1 configuration 1 interface 0
[ 3.1938259] uaudio0: C-Media Electronics Inc. (0x08bb) USB PnP Sound Device (0x2902), rev 1.10/1.00, addr 2
[ 3.3285497] uaudio0: ignored input endpoint of type adaptive
[ 3.3945598] uaudio0: audio rev 1.00
[ 3.4361619] audio0 at uaudio0: playback
[ 3.4819248] audio0: slinear_le:16 2ch 48000Hz, blk 11520 bytes (60ms) for playback
[ 3.5724108] spkr1 at audio0: PC Speaker (synthesized)
[ 3.6327359] wsbell at spkr1 not configured
[ 3.6816165] uhidev0 at uhub0 port 1 configuration 1 interface 3
[ 3.7523442] uhidev0: C-Media Electronics Inc. (0x08bb) USB PnP Sound Device (0x2902), rev 1.10/1.00, addr 2, icla0
[ 3.8861705] uhid0 at uhidev0: input=4, output=4, feature=0
[ 4.5619562] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
[ 8.4262408] stray isa irq 14
[ 8.4604230] wd0 at atabus0 drive 0
[ 8.5004605] wd0: <SanDisk SD8SBAT032G1122>
[ 8.5483162] wd0: 30533 MB, 62037 cyl, 16 head, 63 sec, 512 bytes/sect x 62533296 sectors
[ 23.6411849] stray isa irq 15
[ 43.6745069] atapibus0 at atabus1: 2 targets
[ 43.7227337] stray isa irq 15
[ 43.7663041] cd0 at atapibus0 drive 0: <COMPAQ CDR-8435, , 0013> cdrom removable
[ 43.8659143] wd1 at atabus2 drive 0
[ 43.9050584] wd1: <Samsung SSD 870 EVO 1TB>
[ 43.9539408] wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
[ 44.0553721] swwdog0: software watchdog initialized
[ 44.1120140] wd0: no disk label
[ 44.1472905] wd0: no disk label
[ 44.1836936] wd0: excessive DMA errors - 4 in last 3 transfers
[ 44.2523360] wd0c: error reading fsbn 32 of 32-33 (wd0 bn 32; cn 0 tn 0 sn 32), xfer 38, retry 0
[ 44.2523360] wd0: (aborted command, interface CRC error)
[ 45.4206099] wd0c: error reading fsbn 32 of 32-33 (wd0 bn 32; cn 0 tn 0 sn 32), xfer 38, retry 1
[ 45.4206099] wd0: (aborted command, interface CRC error)
[ 46.0836996] wd0c: error reading fsbn 32 of 32-33 (wd0 bn 32; cn 0 tn 0 sn 32), xfer 38, retry 2
[ 46.0836996] wd0: (aborted command, interface CRC error)
[ 46.7467893] wd0c: error reading fsbn 32 of 32-33 (wd0 bn 32; cn 0 tn 0 sn 32), xfer 38, retry 3
[ 46.7467893] wd0: (aborted command, interface CRC error)
[ 47.4098787] wd0: soft error (corrected) xfer 38
[ 47.4675010] WARNING: 1 error while detecting hardware; check system log.
[ 47.5456227] wd0c: error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), xfer 38, retry 0
[ 47.5456227] wd0: (aborted command, interface CRC error)
[ 48.1979688] wd0c: error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), xfer 38, retry 1
[ 48.1979688] wd0: (aborted command, interface CRC error)
[ 48.8483630] wd0c: error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), xfer 38, retry 2
[ 48.8483630] wd0: (aborted command, interface CRC error)
[ 49.4987572] wd0: soft error (corrected) xfer 38
[ 49.5510686] wd0: no disk label
[ 49.5874723] root on wd0a dumps on wd0b
[ 49.6321942] wd0: no disk label
[ 49.6685983] vfs_mountroot: can't open root device
[ 49.7247611] cannot mount root, error = 6
[ 49.7715623] root device (default wd0a): wd1a
[ 52.1101055] dump device (default wd1b):
[ 52.3261653] file system (default generic):
[ 52.5900548] root on wd1a dumps on wd1b
[ 52.6384274] entropy: best effort
[ 52.6765164] root file system type: ffs
[ 52.7204618] kern.module.path=/stand/alpha/10.1/modules
[ 52.7868684] init path (default /sbin/init):
[ 52.8540556] init: trying /sbin/init
Thu Oct 22 14:43:46 EST 2026
Starting root file system check:
/dev/rwd1a: file system is clean; not checking
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting file system checks:
[ 53.7360921] entropy: ready
Loaded entropy from /var/db/entropy-file.
Waiting for entropy...done
Setting tty flags.
Starting network.
Hostname: Webbrick
IPv6 mode: host
Configuring network interfaces: wm0.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Building databases: dev, utmp, utmpx.
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
wsconsctl: keysym F1 not found
wsconsctl: keysym F2 not found
wsconsctl: keysym F3 not found
wsconsctl: keysym F4 not found
Starting syslogd.
Setting date via ntp.
Starting rpcbind.
Mounting all file systems...
Clearing temporary files.
Updating fontconfig cache: done.
Checking quotas: done.
Starting mountd.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: adding /swapfile as swap device at priority 0
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting dbus.
Starting sshd.
Starting postfix.
postfix/postlog: starting the Postfix mail system
Starting inetd.
Starting cron.
Thu Oct 22 14:44:14 EST 2026
NetBSD/alpha (Webbrick) (constty)
login: Oct 22 14:44:14 Webbrick getty[558]: /dev/ttyE2: Device not configured
Oct 22 14:44:14 Webbrick getty[1445]: /dev/ttyE3: Device not configured
Oct 22 14:44:14 Webbrick getty[823]: /dev/ttyE4: Device not configured
Oct 22 14:44:14 Webbrick getty[1380]: /dev/ttyE5: Device not configured
Oct 22 14:44:14 Webbrick getty[858]: /dev/ttyE0: Device not configured
Oct 22 14:44:14 Webbrick getty[844]: /dev/ttyE1: Device not configured
NetBSD/alpha (Webbrick) (constty)
login: technoid
Password:
Oct 22 14:44:29 Webbrick login: technoid on tty constty
Last login: Tue Oct 20 01:39:28 2026 from pinnacleridge on pts/0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.1 (ALPHABOX-OPTIMIZED) #0: Thu Aug 6 17:59:00 EST 2026
Welcome to NetBSD!
Webbrick$ mount
/dev/wd1a on / type ffs (log, noatime, NFS exported, local)
kernfs on /kern type kernfs (local)
ptyfs on /dev/pts type ptyfs (local)
procfs on /proc type procfs (local)
tmpfs on /var/shm type tmpfs (local)
Webbrick$ cat /etc/fstab
# NetBSD /etc/fstab
# See /usr/share/examples/fstab/ for more examples.
ROOT.a / ffs rw,log,noatime 1 1
#/dev/wd0a / ffs rw,noatime 1 1
/swapfile none swap sw,priority=0 0 0
#/dev/wd0b none swap sw,dp 0 0
kernfs /kern kernfs rw
ptyfs /dev/pts ptyfs rw
procfs /proc procfs rw
/dev/cd0a /cdrom cd9660 ro,noauto
tmpfs /var/shm tmpfs rw,-m1777,-sram%25
Webbrick$
CTRL-A Z for help | 9600 8N1 | NOR | Minicom 2.10 | VT102 | Offline | /home/technoid/ttyWebbrick