Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2026-11-16 22:17:08
From: TheOneDoc
Description: GMKtec NucBox G3 Plus
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[     1.000000]     2024, 2025, 2026
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 11.99.11 (GENERIC) #0: Mon Nov 16 19:44:57 CET 2026
[     1.000000] 	[_EMAIL_XXXXXXXXXXXXXXXXX]:/home/uwe/netbsd/amd64/obj/home/uwe/netbsd/src/sys/arch/amd64/compile/GENERIC
[     1.000000] total memory = 32510 MB
[     1.000000] avail memory = 31419 MB
[     1.000000] WARNING: module error: Module `cd9660' pushed by boot loader already exists
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] RTC BIOS diagnostic error 0x3f<config_unit,memory_size,fixed_disk,invalid_time>
[     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[     1.000004] efi: systbl at pa 73e65018
[     1.000004] mainbus0 (root)
[     1.000004] ACPI: RSDP 0x000000007351D014 000024 (v02 ALASKA)
[     1.000004] ACPI: XSDT 0x000000007351C728 00010C (v01 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: FACP 0x000000007347C000 000114 (v06 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: DSDT 0x00000000733FA000 081690 (v02 ALASKA A M I    01072009 INTL 20200717)
[     1.000004] ACPI: FACS 0x0000000073540000 000040
[     1.000004] ACPI: SSDT 0x000000007347D000 001459 (v02 DptfTb DptfTabl 00001000 INTL 20200717)
[     1.000004] ACPI: FIDT 0x00000000733F9000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[     1.000004] ACPI: SSDT 0x0000000073480000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717)
[     1.000004] ACPI: SSDT 0x00000000733F3000 005CC9 (v02 CpuRef CpuSsdt  00003000 INTL 20200717)
[     1.000004] ACPI: SSDT 0x00000000733F0000 002935 (v02 SaSsdt SaSsdt   00003000 INTL 20200717)
[     1.000004] ACPI: SSDT 0x00000000733EC000 0033D3 (v02 INTEL  IgfxSsdt 00003000 INTL 20200717)
[     1.000004] ACPI: HPET 0x000000007347F000 000038 (v01 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: APIC 0x00000000733EB000 0001DC (v05 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: MCFG 0x00000000733EA000 00003C (v01 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: SSDT 0x00000000733E8000 001F1A (v02 ALASKA Ther_Rvp 00001000 INTL 20200717)
[     1.000004] ACPI: UEFI 0x00000000734D3000 000048 (v01 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: SDEV 0x00000000733E7000 0001B6 (v01                 00000000      00000000)
[     1.000004] ACPI: NHLT 0x00000000733E6000 00002D (v00 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: LPIT 0x00000000733E5000 0000CC (v01 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: SSDT 0x00000000733E1000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717)
[     1.000004] ACPI: SSDT 0x00000000733DE000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717)
[     1.000004] ACPI: DBGP 0x00000000733DD000 000034 (v01 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: DBG2 0x00000000733DC000 000054 (v00 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: SSDT 0x00000000733DA000 001918 (v02 ALASKA UsbCTabl 00001000 INTL 20200717)
[     1.000004] ACPI: DMAR 0x00000000733D9000 000088 (v02 INTEL  EDK2     00000002      01000013)
[     1.000004] ACPI: FPDT 0x00000000733D8000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
[     1.000004] ACPI: SSDT 0x00000000733D7000 000DAC (v02 INTEL  xh_adl_N 00000000 INTL 20200717)
[     1.000004] ACPI: SSDT 0x00000000733D3000 003AEA (v02 SocGpe SocGpe   00003000 INTL 20200717)
[     1.000004] ACPI: SSDT 0x00000000733CF000 0039DA (v02 SocCmn SocCmn   00003000 INTL 20200717)
[     1.000004] ACPI: SSDT 0x00000000733CE000 000144 (v02 Intel  ADebTabl 00001000 INTL 20200717)
[     1.000004] ACPI: PHAT 0x00000000733CD000 000611 (v01 ALASKA A M I    00000005 MSFT 0100000D)
[     1.000004] ACPI: TPM2 0x00000000733CC000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[     1.000004] ACPI: WSMT 0x00000000733E4000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[     1.000004] Firmware Error (ACPI): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20260408/dswload2-206)
[     1.000004] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20260408/psobject-264)
[     1.000004] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
[     1.000004] Firmware Error (ACPI): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20260408/dswload2-206)
[     1.000004] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20260408/psobject-264)
[     1.000004] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
[     1.000004] ACPI: 14 ACPI AML tables successfully acquired and loaded
[     1.000004] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
[     1.000004] cpu0 at mainbus0 apid 0
[     1.000004] cpu0: Use lfence to serialize rdtsc
[     1.000004] cpu0: CPU base freq 800000000 Hz
[     1.000004] cpu0: CPU max freq 3600000000 Hz
[     1.000004] cpu0: TSC freq CPUID 806400000 Hz
[     1.000004] cpu0: Intel(R) N150, id 0xb06e0
[     1.000004] cpu0: node 0, package 0, core 0, smt 0
[     1.000004] cpu1 at mainbus0 apid 2
[     1.000004] cpu1: Intel(R) N150, id 0xb06e0
[     1.000004] cpu1: node 0, package 0, core 1, smt 0
[     1.000004] cpu2 at mainbus0 apid 4
[     1.000004] cpu2: Intel(R) N150, id 0xb06e0
[     1.000004] cpu2: node 0, package 0, core 2, smt 0
[     1.000004] cpu3 at mainbus0 apid 6
[     1.000004] cpu3: Intel(R) N150, id 0xb06e0
[     1.000004] cpu3: node 0, package 0, core 3, smt 0
[     1.000004] acpi0 at mainbus0: Intel ACPICA 20260408
[     1.000004] acpi0: X/RSDT: OemId <ALASKA,  A M I ,01072009>, AslId <AMI ,01000013>
[     1.000004] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000c0000000
[     1.000004] MPACPI PCI bus number 2 configuration failed: 6
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0xFFFF8872FEBCF408 0001A3 (v02 PmRef  Cpu0Ist  00003000 INTL 20200717)
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0xFFFF8872FEBCF608 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20200717)
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0xFFFF8B803DB50000 001BAF (v02 PmRef  ApIst    00003000 INTL 20200717)
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0xFFFF8B803DB53000 001349 (v02 PmRef  ApPsd    00003000 INTL 20200717)
[     1.000004] acpi0: SCI interrupting at int 9
[     1.000004] acpi0: fixed power button present
[     1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[     1.054918] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[     1.054918] timecounter: Timecounter "hpet0" frequency 19200000 Hz quality 2000
[     1.055955] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
[     1.055955] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[     1.055955] acpiout0 at acpivga0 (DD01, 0x0001): ACPI Display Output Device
[     1.055955] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
[     1.055955] acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output Device
[     1.055955] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
[     1.055955] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
[     1.055955] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
[     1.055955] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
[     1.055955] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
[     1.055955] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
[     1.055955] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
[     1.055955] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
[     1.055955] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
[     1.055955] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
[     1.055955] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
[     1.055955] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
[     1.055955] acpiout15 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device
[     1.055955] acpiout15: brightness levels: [0-100]
[     1.055955] acpiout16 at acpivga0 (DD2F, 0x001f): ACPI Display Output Device
[     1.055955] acpiout16: brightness levels: [0-100]
[     1.055955] acpivga0: connected output devices:
[     1.055955] acpivga0:   0x0000: Unknown Output Device, head 0, bios detect
[     1.055955] acpivga0:   0x0000: Unknown Output Device, head 0, bios detect
[     1.055955] PA01 (MCHP1930) at acpi0 not configured
[     1.055955] PA02 (MCHP1930) at acpi0 not configured
[     1.055955] PA03 (MCHP1930) at acpi0 not configured
[     1.055955] PA04 (MCHP1930) at acpi0 not configured
[     1.055955] AWAC (ACPI000E) at acpi0 not configured
[     1.055955] igpio0 at acpi0 (GPI0, INTC1057): mem 0xfd6e0000-0xfd6effff,0xfd6d0000-0xfd6dffff,0xfd6a0000-0xfd6affff,0xfd690000-0xfd69ffff irq 14
[     1.055955] gpio0 at igpio0: 257 pins
[     1.055955] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[     1.055955] acpiwmi0 at acpi0 (WFDE, PNP0C14-DSarDev): ACPI WMI Interface
[     1.055955] acpiwmibus at acpiwmi0 not configured
[     1.055955] acpiwmi1 at acpi0 (WFTE, PNP0C14-TestDev): ACPI WMI Interface
[     1.055955] acpiwmibus at acpiwmi1 not configured
[     1.055955] PEPD (INT33A1) at acpi0 not configured
[     1.055955] HIDD (INTC1070) at acpi0 not configured
[     1.055955] acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[     1.055955] TPM (MSFT0101) at acpi0 not configured
[     1.055955] IETM (INTC1041) at acpi0 not configured
[     1.055955] ACM (INTC1025) at acpi0 not configured
[     1.055955] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
[     1.055955] acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
[     1.055955] acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
[     1.055955] acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
[     1.055955] acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
[     1.055955] acpitz0 at acpi0 (TZ00): cpu0 cpu1 cpu2 cpu3
[     1.055955] acpitz0: active cooling level 0: 105.0C
[     1.055955] acpitz0: active cooling level 1: 55.0C
[     1.055955] acpitz0: active cooling level 2: 50.0C
[     1.055955] acpitz0: active cooling level 3: 45.0C
[     1.055955] acpitz0: active cooling level 4: 40.0C
[     1.055955] acpitz0: levels: critical 110.0 C
[     1.055955] ACPI: Enabled 4 GPEs in block 00 to 7F
[     1.055955] pci0 at mainbus0 bus 0: configuration mode 1
[     1.055955] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.055955] pchb0 at pci0 dev 0 function 0: Intel Alder Lake-N (0+4, N100) Host (rev. 0x00)
[     1.055955] genfb0 at pci0 dev 2 function 0: Intel product 46d4 (rev. 0x00)
[     1.055955] genfb0: framebuffer at 0x4000000000, size 1024x768, depth 32, stride 4096
[     1.055955] genfb0: shadow framebuffer enabled, size 3072 KB
[     1.055955] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[     1.055955] wsmux1: connecting to wsdisplay0
[     1.055955] drm at genfb0 not configured
[     1.055955] Intel Alder Lake Dynamic Tuning Technology (miscellaneous DASP) at pci0 dev 4 function 0 not configured
[     1.055955] Intel Alder Lake Crash Log & Telemetry (miscellaneous DASP, revision 0x01) at pci0 dev 10 function 0 not configured
[     1.055955] xhci0 at pci0 dev 20 function 0: Intel Alder Lake-N PCH USB 3.2 Gen 2x1 xHCI (rev. 0x00)
[     1.055955] xhci0: 64-bit DMA
[     1.055955] xhci0: interrupting at msi0 vec 0
[     1.055955] xhci0: xHCI version 1.20
[     1.055955] usb0 at xhci0: USB revision 3.1
[     1.055955] usb1 at xhci0: USB revision 2.0
[     1.055955] Intel Alder Lake-N Shared SRAM (RAM memory) at pci0 dev 20 function 2 not configured
[     1.055955] Intel Alder Lake-N I2C 0 (miscellaneous serial bus) at pci0 dev 21 function 0 not configured
[     1.055955] Intel Alder Lake-N HECI 1 (miscellaneous communications) at pci0 dev 22 function 0 not configured
[     1.055955] ahcisata0 at pci0 dev 23 function 0: Intel Alder Lake-N SATA (AHCI) (rev. 0x00)
[     1.055955] ahcisata0: 64-bit DMA
[     1.055955] ahcisata0: AHCI revision 1.31, 1 port, 32 slots, CAP 0xe534ff00<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SALP,SSNTF,SNCQ,S64A>
[     1.055955] ahcisata0: interrupting at msi1 vec 0
[     1.055955] atabus0 at ahcisata0 channel 1
[     1.055955] sdhc0 at pci0 dev 26 function 0: Intel Alder Lake-N eMMC (rev. 0x00)
[     1.055955] sdhc0: interrupting at ioapic0 pin 16
[     1.055955] sdhc0: SDHC 3.0, rev 16, caps <546ec881/80000807>, 32-bit ADMA2, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1 (128s timer), 2048 byte blocks
[     1.055955] sdmmc0 at sdhc0 slot 0
[     1.055955] ppb0 at pci0 dev 28 function 0: Intel Alder Lake-N PCIe Root Port 7 (rev. 0x00)
[     1.055955] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
[     1.055955] ppb0: link is x1 @ 2.5GT/s
[     1.055955] pci1 at ppb0 bus 1
[     1.055955] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.055955] Realtek Semiconductor product b852 (miscellaneous network) at pci1 dev 0 function 0 not configured
[     1.055955] ppb1 at pci0 dev 29 function 0: Intel Alder Lake-N PCIe Root Port 9 (rev. 0x00)
[     1.055955] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s
[     1.055955] pci2 at ppb1 bus 2
[     1.055955] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.055955] nvme0 at pci2 dev 0 function 0: vendor 1cc1 product 8201 (rev. 0x03)
[     1.055955] nvme0: NVMe 1.3
[     1.055955] nvme0: for admin queue interrupting at msix2 vec 0
[     1.055955] nvme0: XPG GAMMIX S11 Pro, firmware 42AZS6AC, serial 2J4420070736
[     1.055955] nvme0: for io queue 1 interrupting at msix2 vec 1 affinity to cpu0
[     1.055955] nvme0: for io queue 2 interrupting at msix2 vec 2 affinity to cpu1
[     1.055955] nvme0: for io queue 3 interrupting at msix2 vec 3 affinity to cpu2
[     1.055955] nvme0: for io queue 4 interrupting at msix2 vec 4 affinity to cpu3
[     1.055955] ld0 at nvme0 nsid 1
[     1.055955] ld0: 953 GB, 124519 cyl, 255 head, 63 sec, 512 bytes/sect x 2000409264 sectors
[     1.055955] ppb2 at pci0 dev 29 function 2: Intel Alder Lake-N PCIe Root Port 11 (rev. 0x00)
[     1.055955] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
[     1.055955] ppb2: link is x1 @ 5.0GT/s
[     1.055955] pci3 at ppb2 bus 3
[     1.055955] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.055955] igc0 at pci3 dev 0 function 0, 64-bit DMA: Intel(R) Ethernet Controller I226-V (rev. 0x04)
[     1.055955] igc0: txrx interrupting at msix3 vec 0
[     1.055955] igc0: txrx interrupting at msix3 vec 1
[     1.055955] igc0: txrx interrupting at msix3 vec 2
[     1.055955] igc0: txrx interrupting at msix3 vec 3
[     1.055955] igc0: link interrupting at msix3 vec 4
[     1.055955] igc0: PHY: OUI 0x984fee model 0x0005, rev. 8, PHY FW version 0x889d
[     1.055955] igc0: NVM image version 2.22, EtrackID 80000374
[     1.055955] igc0: Ethernet address [_MAC_XXXXXXXXXX]
[     1.055955] pcib0 at pci0 dev 31 function 0: Intel Alder Lake-N eSPI (rev. 0x00)
[     1.055955] hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
[     1.055955] hdaudio0: interrupting at msi4 vec 0
[     1.055955] hdaudio0: HDA ver. 1.0, OSS 9, ISS 7, BSS 0, SDO 1, 64-bit
[     1.055955] hdaudio0: autoconfiguration error: no codecs found
[     1.055955] hdaudio0: autoconfiguration error: device driver failed to attach
[     1.055955] ichsmb0 at pci0 dev 31 function 4: Intel Alder Lake-N SMBus (rev. 0x00)
[     1.055955] ichsmb0: interrupting at ioapic0 pin 16
[     1.055955] iic0 at ichsmb0: I2C bus
[     1.055955] Intel Alder Lake-N SPI (FLASH) (miscellaneous serial bus) at pci0 dev 31 function 5 not configured
[     1.055955] isa0 at pcib0
[     1.055955] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
[     1.055955] pcppi0 at isa0 port 0x61
[     1.055955] spkr0 at pcppi0: PC Speaker
[     1.055955] wsbell at spkr0 not configured
[     1.055955] midi0 at pcppi0: PC speaker
[     1.055955] sysbeep0 at pcppi0
[     1.055955] attimer1: attached to pcppi0
[     1.055955] acpicpu0 at cpu0: ACPI CPU
[     1.055955] acpicpu0: C1: HLT, lat   0 us, pow     0 mW
[     1.055955] acpicpu0: P0: FFH, lat  10 us, pow  6000 mW,  801 MHz, turbo boost
[     1.055955] acpicpu0: P1: FFH, lat  10 us, pow  6000 mW,  800 MHz
[     1.055955] acpicpu0: P2: FFH, lat  10 us, pow  5160 mW,  700 MHz
[     1.055955] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
[     1.055955] acpicpu1 at cpu1: ACPI CPU
[     1.055955] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
[     1.055955] acpicpu2 at cpu2: ACPI CPU
[     1.055955] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
[     1.055955] acpicpu3 at cpu3: ACPI CPU
[     1.055955] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105
[     1.055955] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.055955] timecounter: Timecounter "TSC" frequency 806400000 Hz quality 3000
[     1.256842] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[     1.269527] uhub0: 4 ports with 4 removable, self powered
[     1.269527] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[     1.289528] uhub1: 12 ports with 12 removable, self powered
[     1.299527] ld0: GPT GUID: 7cde496a-566a-4c97-8026-beade324acf2
[     1.299527] dk0 at ld0: "esp", 4880384 blocks at 2048, type: msdos
[     1.299527] dk1 at ld0: "LUKS-crypt", 1995526144 blocks at 4882432, type: ext2fs
[     1.299527] IPsec: Initialized Security Association Processing.
[     1.399528] ahcisata0 port 1: device present, speed: 6.0Gb/s
[     1.449527] sdmmc0: autoconfiguration error: couldn't enable card: 60
[     1.729528] umass0 at uhub0 port 1 configuration 1 interface 0
[     1.729528] umass0: USB (0x0781) SanDisk 3.2Gen1 (0x5583), rev 3.20/1.00, addr 1
[     1.729528] umass0: using SCSI over Bulk-Only
[     1.739528] scsibus0 at umass0: 2 targets, 1 lun per target
[     1.739528] sd0 at scsibus0 target 0 lun 0: <USB, SanDisk 3.2Gen1, 1.00> disk removable
[     1.739528] sd0: 114 GB, 65535 cyl, 16 head, 63 sec, 512 bytes/sect x 240353280 sectors
[     1.789528] uhub2 at uhub1 port 4: GenesysLogic (0x05e3) USB2.1 Hub (0x0610), class 9/0, rev 2.10/6.63, addr 2
[     1.789528] uhub2: single transaction translator
[     1.789528] uhub2: 4 ports with 4 removable, self powered
[     2.179528] uhub3 at uhub0 port 4: GenesysLogic (0x05e3) USB3.1 Hub (0x0626), class 9/0, rev 3.20/6.63, addr 3
[     2.179528] uhub3: 4 ports with 4 removable, self powered
[     2.469528] uhidev0 at uhub2 port 2 configuration 1 interface 0
[     2.469528] uhidev0: SINO WEALTH (0x258a) Gaming KB (0x002a), rev 1.10/90.36, addr 4, iclass 3/1
[     2.479528] ukbd0 at uhidev0
[     2.479528] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[     2.479528] uhidev1 at uhub2 port 2 configuration 1 interface 1
[     2.479528] uhidev1: SINO WEALTH (0x258a) Gaming KB (0x002a), rev 1.10/90.36, addr 4, iclass 3/0
[     2.479528] uhidev1: 12 report ids
[     2.479528] uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
[     2.479528] uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
[     2.479528] ukbd1 at uhidev1 reportid 5
[     2.479528] wskbd1 at ukbd1 mux 1
[     2.479528] wskbd1: connecting to wsdisplay0
[     2.479528] ukbd2 at uhidev1 reportid 6
[     2.479528] wskbd2 at ukbd2 mux 1
[     2.479528] wskbd2: connecting to wsdisplay0
[     2.479528] uhid2 at uhidev1 reportid 9: input=0, output=0, feature=504
[     2.479528] uhid3 at uhidev1 reportid 10: input=0, output=0, feature=41
[     2.479528] uhid4 at uhidev1 reportid 11: input=0, output=0, feature=126
[     2.479528] uhid5 at uhidev1 reportid 12: input=0, output=0, feature=1920
[     2.919528] uhidev2 at uhub2 port 3 configuration 1 interface 0
[     2.919528] uhidev2: Compx (0x3554) 3-mode mouse (0xf55e), rev 2.00/3.13, addr 5, iclass 3/1
[     2.919528] ukbd3 at uhidev2
[     2.919528] wskbd3 at ukbd3 mux 1
[     2.919528] wskbd3: connecting to wsdisplay0
[     2.919528] uhidev3 at uhub2 port 3 configuration 1 interface 1
[     2.919528] uhidev3: Compx (0x3554) 3-mode mouse (0xf55e), rev 2.00/3.13, addr 5, iclass 3/0
[     2.919528] uhidev3: 16 report ids
[     2.919528] uhid6 at uhidev3 reportid 2: input=7, output=0, feature=0
[     2.919528] uhid7 at uhidev3 reportid 3: input=1, output=0, feature=0
[     2.919528] uhid8 at uhidev3 reportid 5: input=2, output=0, feature=0
[     2.919528] uhid9 at uhidev3 reportid 6: input=0, output=0, feature=7
[     2.919528] uhid10 at uhidev3 reportid 8: input=16, output=16, feature=0
[     2.919528] uhid11 at uhidev3 reportid 16: input=7, output=0, feature=0
[     2.919528] uhidev4 at uhub2 port 3 configuration 1 interface 2
[     2.919528] uhidev4: Compx (0x3554) 3-mode mouse (0xf55e), rev 2.00/3.13, addr 5, iclass 3/1
[     2.919528] ums0 at uhidev4: 5 buttons, W and Z dirs
[     2.919528] wsmouse0 at ums0 mux 0
[     2.959528] wd0 at atabus0 drive 0
[     2.959528] wd0: <NT-2TB 2242>
[     2.959528] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
[     2.959528] wd0: 1907 GB, 3969045 cyl, 16 head, 63 sec, 512 bytes/sect x 4000797360 sectors
[     2.959528] wd0: GPT GUID: 30d3d5bf-f783-411c-af0b-c8efd0d9b15a
[     2.959528] dk2 at wd0: "4dbb6a78-3672-448c-9858-7ffeca04ecb6", 4000794624 blocks at 2048, type: ext2fs
[     2.959528] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[     2.959528] wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[     3.399528] uaudio0 at uhub1 port 6 configuration 1 interface 0
[     3.399528] uaudio0: CSCTEK (0x0573) USB Audio and HID (0x1573), rev 2.00/80.07, addr 6
[     3.399528] uaudio0: audio rev 1.00
[     3.399528] audio0 at uaudio0: playback, capture, full duplex, independent
[     3.399528] audio0: slinear_le:16 2ch 48000Hz, blk 11520 bytes (60ms) for playback
[     3.399528] audio0: slinear_le:16 1ch 48000Hz, blk 6000 bytes (62.5ms) for recording
[     3.399528] spkr1 at audio0: PC Speaker (synthesized)
[     3.399528] wsbell at spkr1 not configured
[     3.399528] uhidev5 at uhub1 port 6 configuration 1 interface 3
[     3.399528] uhidev5: CSCTEK (0x0573) USB Audio and HID (0x1573), rev 2.00/80.07, addr 6, iclass 3/0
[     3.399528] uhidev5: autoconfiguration error: no input interrupt endpoint
[     3.879528] ubt0 at uhub1 port 8
[     3.879528] ubt0: Realtek (0x0bda) Bluetooth Radio (0xb85b), rev 1.00/0.00, addr 7
[     3.879528] swwdog0: software watchdog initialized
[     3.919528] WARNING: 4 errors while detecting hardware; check system log.
[     3.919528] boot device: sd0
[     3.919528] root on sd0a dumps on sd0b
[     3.949528] root file system type: cd9660
[     3.949528] kern.module.path=/stand/amd64/11.99.11/modules