Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 05:28:22
From: benny
Description: Fujitsu Siemens Lifebook E7xxx (i386/p4)
NetBSD 2.0_BETA (KAMINO) #1: Wed Apr 14 16:55:30 CEST 2004
root@endor:/usr/src/sys/arch/i386/compile/KAMINO
total memory = 1023 MB
avail memory = 997 MB
BIOS32 rev. 0 found at 0xfd790
PCI BIOS rev. 2.1 found at 0xfd988
pcibios: config mechanism [1][x], special cycles [x][x], last bus 4
PCI IRQ Routing Table rev. 1.0 found at 0xfdf30, size 176 bytes (9 entries)
PCI Interrupt Router at 000:31:0 (vendor 0x8086 product 0x122e)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:29:0 0x8086 0x2482 A 0x00 11 0 already assigned
000:29:2 0x8086 0x2487 C 0x02 11 0 already assigned
000:31:1 0x8086 0x248a A 0x02 11 0 fixed up
000:31:3 0x8086 0x2483 B 0x01 11 0 already assigned
000:31:5 0x8086 0x2485 B 0x01 11 0 already assigned
002:10:0 0x1217 0x6933 A 0x00 11 0 already assigned
002:10:1 0x1217 0x6933 B 0x01 11 0 already assigned
002:12:0 0x10ec 0x8139 A 0x02 11 0 already assigned
002:13:0 0x1260 0x3873 A 0x02 11 0 already assigned
002:14:0 0x104c 0x8026 A 0x01 11 0 already assigned
------------------------------------------
PCI fixup examining 8086:1a30
PCI fixup examining 8086:1a31
PCI fixup examining 1002:4c57
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 8086:2482
PCI fixup examining 8086:2487
PCI fixup examining 8086:2448
PCI fixup examining 1217:6933
PCI bridge 2: primary 2, secondary 3, subordinate 3
PCI fixup examining 1217:6933
PCI bridge 3: primary 2, secondary 4, subordinate 4
PCI fixup examining 10ec:8139
PCI fixup examining 1260:3873
PCI fixup examining 104c:8026
PCI bridge 1: primary 0, secondary 2, subordinate 4
PCI fixup examining 8086:248c
PCI fixup examining 8086:248a
PCI fixup examining 8086:2483
PCI fixup examining 8086:2485
PCI bus #4 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x1a30
10h mem 0xec000000 0x04000000
[OK]
000:01:0 0x8086 0x1a31
[OK]
000:29:0 0x8086 0x2482
20h port 0x00001440 0x00000020
[OK]
000:29:2 0x8086 0x2487
20h port 0x00001460 0x00000020
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x248c
[OK]
000:31:1 0x8086 0x248a
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x000014a0 0x00000010
24h mem 0xe8000000 0x00000400
[OK]
000:31:3 0x8086 0x2483
20h port 0x00001480 0x00000020
[OK]
000:31:5 0x8086 0x2485
10h port 0x00001000 0x00000100
14h port 0x00001400 0x00000040
[OK]
001:00:0 0x1002 0x4c57
10h mem 0xf0000000 0x08000000
14h port 0x00002000 0x00000100
18h mem 0xe8100000 0x00010000
[OK]
002:10:0 0x1217 0x6933
10h mem 0x00000000 0x00001000
[NG]
002:10:1 0x1217 0x6933
10h mem 0x00000000 0x00001000
[NG]
002:12:0 0x10ec 0x8139
10h port 0x00003000 0x00000100
14h mem 0xe8204800 0x00000100
[OK]
002:13:0 0x1260 0x3873
10h mem 0xf8000000 0x00001000
[OK]
002:14:0 0x104c 0x8026
10h mem 0xe8204000 0x00000800
14h mem 0xe8200000 0x00004000
[OK]
--------------------------[ 2 devices bogus]
Physical memory end: 0x3ff7c000
PCI memory mapped I/O space start: 0x40000000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x1a30
10h mem 0xec000000 0x04000000
[OK]
000:01:0 0x8086 0x1a31
[OK]
000:29:0 0x8086 0x2482
20h port 0x00001440 0x00000020
[OK]
000:29:2 0x8086 0x2487
20h port 0x00001460 0x00000020
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x248c
[OK]
000:31:1 0x8086 0x248a
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x000014a0 0x00000010
24h mem 0xe8000000 0x00000400
[OK]
000:31:3 0x8086 0x2483
20h port 0x00001480 0x00000020
[OK]
000:31:5 0x8086 0x2485
10h port 0x00001000 0x00000100
14h port 0x00001400 0x00000040
[OK]
001:00:0 0x1002 0x4c57
10h mem 0xf0000000 0x08000000
14h port 0x00002000 0x00000100
18h mem 0xe8100000 0x00010000
[OK]
002:10:0 0x1217 0x6933
10h mem 0x40000000 0x00001000
[OK]
002:10:1 0x1217 0x6933
10h mem 0x40001000 0x00001000
[OK]
002:12:0 0x10ec 0x8139
10h port 0x00003000 0x00000100
14h mem 0xe8204800 0x00000100
[OK]
002:13:0 0x1260 0x3873
10h mem 0xf8000000 0x00001000
[OK]
002:14:0 0x104c 0x8026
10h mem 0xe8204000 0x00000800
14h mem 0xe8200000 0x00004000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium 4 (686-class), 1196.20 MHz, id 0xf29
cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <FUJ ,ROCK ,01240000>, AslId <FUJ ,00001000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type `Processor` (0x0c) at acpi0 not configured
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpi: activated PNP0C0F
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0000 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: using exception 16
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
com3 at acpi0 (PNP0501-1)
com3: io 0x3f8-0x3ff irq 3
com3: ns16550a, working fifo
com4 at acpi0 (PNP0510)
com4: io 0x2f8-0x2ff irq 4
com4: ns16550a, working fifo
lpt3 at acpi0 (PNP0401)
lpt3: io 0x378-0x37f,0x778-0x77b irq 7 drq 1
FUJ02B1 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpibat1 at acpi0 (PNP0C0A-2): ACPI Battery (Control Method)
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1a30 (rev. 0x04)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xec000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x1a31 (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1002 product 0x4c57 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2482 (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 2: vendor 0x8086 product 0x2487 (rev. 0x02)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 10 function 0: vendor 0x1217 product 0x6933 (rev. 0x02)
cbb1 at pci2 dev 10 function 1: vendor 0x1217 product 0x6933 (rev. 0x02)
rtk0 at pci2 dev 12 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wi0 at pci2 dev 13 function 0: Intersil Prism2.5 Wireless Lan
wi0: interrupting at irq 11
wi0: 802.11 address [_MAC_XXXXXXXXXX]
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.1)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
fwohci0 at pci2 dev 14 function 0: vendor 0x104c product 0x8026 (rev. 0x00)
fwohci0: interrupting at irq 11
fwohci0: OHCI 1.1, [_MAC_XXXXXXXXXX]:a2:8e, 400Mb/s, 2048 max_rec, 4 ir_ctx, 8 it_ctx
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0
pcmcia1 at cardslot1
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x248c (rev. 0x02)
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
vendor 0x8086 product 0x2483 (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: SigmaTel STAC9766/67 codec; headphone, 20 bit DAC, 18 bit ADC, SigmaTel 3D
auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
auich0: measured ac97 link rate at 48011 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
IPsec: Initialized Security Association Processing.
fw0 at fwohci0: [_MAC_XXXXXXXXXX]:[_MAC_XXXXXXXXXX]:f0:01:00:00
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <FUJITSU MHT2060AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <UJDA750FDVD/CDRW, , 1.20> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)