Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 06:11:58
From: hubertf
Description: Sun SPARCstation 5 with second NIC (BigMac Ethernet, SBus)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 1.6.1_STABLE (SMAUG) #12: Wed May 28 21:54:52 MEST 2003
feyrer@smaug:/disk1/cvs/src-1.6/sys/arch/sparc/compile/SMAUG
total memory = 191 MB
avail memory = 161 MB
using 896 buffers containing 22736 KB of memory
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@3,0
mainbus0 (root): SUNW,SPARCstation-5
cpu0 at mainbus0: MB86904 @ 85 MHz, on-chip FPU
cpu0: 16K instruction (32 b/l), 8K data (16 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08: [_HOSTID_XXXXX]
timer0 at obio0 slot 0 offset 0xd00000: delay constant 40
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0: baud rate 1200
ms0 at zs1 channel 1: baud rate 1200
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000
power0 at obio0 slot 0 offset 0x910000 level 2
fdc0 at obio0 slot 0 offset 0x400000 level 11 softpri 4: chip 82077
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
iommu0 at mainbus0 addr 0x10000000: version 0x4/0x0, page-size 4096, range 64MB
sbus0 at iommu0: clock = 21.250 MHz
dma0 at sbus0 slot 5 offset 0x8400000: dma rev 2
esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
bpp0 at sbus0 slot 5 offset 0xc800000 level 2 (ipl 3): dma rev 2
ledma0 at sbus0 slot 5 offset 0x8400010: dma rev 2
le0 at ledma0 slot 5 offset 0x8c00000 level 6: address [_MAC_XXXXXXXXXX]
le0: 8 receive buffers, 2 transmit buffers
SUNW,CS4231 at sbus0 slot 4 offset 0xc000000 level 9 not configured
power-management at sbus0 slot 4 offset 0xa000000 not configured
qec0 at sbus0 slot 2 offset 0x20000: 128K memory
be0 at qec0 slot 0 offset 0x0 level 4 (ipl 7) rev 1 address [_MAC_XXXXXXXXXX]
on-board transceiver at be0: 10baseT, 100baseTX, auto
cgsix0 at sbus0 slot 3 offset 0x0 level 9: SUNW,501-2325, 1152 x 900, rev 11
cgsix0: attached to /dev/fb
scsibus0: waiting 2 seconds for devices to settle...
sd4 at scsibus0 target 1 lun 0: <IBM, DDRS-39130W, S92A> SCSI2 0/direct fixed
sd4: 8715 MB, 8387 cyl, 10 head, 212 sec, 512 bytes/sect x 17850000 sectors
sd4: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
sd0 at scsibus0 target 3 lun 0: <COMPAQ, BD018635C4, B012> SCSI2 0/direct fixed
sd0: 17365 MB, 7001 cyl, 20 head, 254 sec, 512 bytes/sect x 35565080 sectors
sd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
sd3 at scsibus0 target 4 lun 0: <SEAGATE, ST150176LW, 0002> SCSI2 0/direct fixed
sd3: 47702 MB, 12024 cyl, 22 head, 369 sec, 512 bytes/sect x 97693755 sectors
sd3: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
sd5 at scsibus0 target 5 lun 0: <IBM, DDRS-39130W, S97B> SCSI2 0/direct fixed
sd5: 8715 MB, 8387 cyl, 10 head, 212 sec, 512 bytes/sect x 17850000 sectors
sd5: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, XM-4101TASUNSLCD, 3424> SCSI2 5/cdrom removable
cd0: sync (248.0ns offset 15), 8-bit (4.032MB/s) transfers
Kernelized RAIDframe activated
root on sd0a dumps on sd0b
root file system type: ffs
lfs_mountfs: please consider increasing NBUF to at least 2752
IP Filter: v3.4.29 initialized. Default = pass all, Logging = enabled
be0: link up at 100 Mbps