Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 06:24:42
From: duck
Description: An AlphaPC164, 21164A-2 at 500MHz and 1MB cache. This machine is located in Jakobstad, Finland.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0F (KITT) #0: Mon Jun 14 11:15:08 EEST 2004
        xxx@xxx.xxx:/usr/obj/sys/arch/alpha/compile.alpha/KITT
Digital AlphaPC 164 500 MHz, s/n 
8192 byte page size, 1 processor.
total memory = 256 MB
(2472 KB reserved for PROM, 253 MB used by NetBSD)
avail memory = 244 MB
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2
cpu0: Architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (ALCOR/ALCOR2), pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
cia0: using BWX for PCI config access
pci0 at cia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
tlp0 at pci0 dev 5 function 0: DECchip 21143 Ethernet, pass 3.0
tlp0: interrupting at eb164 irq 2
tlp0: Ethernet address xx:xx:xx:xx:xx:xx
tlp0: 21143 reset block
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0 at pci0 dev 6 function 0: Adaptec 3950B Ultra2 SCSI adapter
ahc0: interrupting at eb164 irq 0
ahc0: aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 6 function 1: Adaptec 3950B Ultra2 SCSI adapter
: unable to map registers
sio0 at pci0 dev 8 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x43)
siop0 at pci0 dev 9 function 0: Symbios Logic 53c810a (fast scsi)
siop0: interrupting at eb164 irq 3
scsibus1 at siop0: 8 targets, 8 luns per target
CMD Technology PCI0646 (IDE mass storage, interface 0x80, revision 0x01) at pci0 dev 11 function 0 not configured
isa0 at sio0
siop0 at pci0 dev 9 function 0: Symbios Logic 53c810a (fast scsi)
siop0: interrupting at eb164 irq 3
scsibus1 at siop0: 8 targets, 8 luns per target
CMD Technology PCI0646 (IDE mass storage, interface 0x80, revision 0x01) at pci0 dev 11 function 0 not configured
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 10 lun 0: <QUANTUM, ATLAS10K3_36_WLS, 020W> disk fixed
sd0: 35074 MB, 31022 cyl, 4 head, 578 sec, 512 bytes/sect x 71833096 sectors
sd0: sync (25.00ns offset 127), 16-bit (80.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 12 lun 0: <IBM, DDYS-T36950N, S96H> disk fixed
sd1: 35003 MB, 15110 cyl, 12 head, 395 sec, 512 bytes/sect x 71687340 sectors
sd1: sync (25.00ns offset 63), 16-bit (80.000MB/s) transfers, tagged queueing
sd2 at scsibus1 target 1 lun 0: <MICROP, 3391NS, X501> disk fixed
sd2: 8681 MB, 4811 cyl, 22 head, 167 sec, 512 bytes/sect x 17780058 sectors
sd2: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers, tagged queueing
st0 at scsibus1 target 2 lun 0: <SEAGATE, DAT    04687-XXX, 6610> tape removable
st0: drive empty
st0: async, 8-bit transfers
cd0 at scsibus1 target 4 lun 0: <PLEXTOR, CD-ROM PX-20TS, 1.01> cdrom removable
cd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
root on sd2a dumps on sd0b