Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 07:30:37
From: Wu
Description: OpenBSD -current (june 2004) in PentiumII 333Mhz, 128Mb RAM. This one acts like a firewall (home-bussines) and has some services like cvs, ftp, etc. It works as my Wifi AP too.
OpenBSD 3.5-current (GENERIC) #4: Thu Jun 10 11:35:00 CEST 2004
[_EMAIL_XXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 334 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 133738496 (130604K)
avail mem = 115552256 (112844K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(85) BIOS, date 03/16/98, BIOS32 rev. 0 @ 0xfb100
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb578
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfda10/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST34321A>
wd0: 32-sector PIO, LBA, 4103MB, 8404830 sectors
wd1 at pciide0 channel 0 drive 1: <ST340810A>
wd1: 16-sector PIO, LBA, 32253MB, 66055248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SC-148F, PS06> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 7 function 3 not configured
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 10 address [_MAC_XXXXXXXXXX]
rlphy0 at rl0 phy 0: RTL internal phy
dc0 at pci0 dev 11 function 0 "Davicom DM9102" rev 0x40: irq 12, address [_MAC_XXXXXXXXXX]
amphy0 at dc0 phy 1: Am79C873 10/100 media interface, rev. 1
wi0 at pci0 dev 12 function 0 "US Robotics WL11000P" rev 0x02: irq 11
wi0: "U.S. Robotics, IEEE 802.11b PC-CARD, Version 01.02"
wi0: PRISM2 HWB3163 rev.A, Firmware 0.3.0 (primary), 1.4.9 (station), address [_MAC_XXXXXXXXXX]
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask c840 netmask dc40 ttymask dcc2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302