Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 07:47:22
From: bob2
Description: Toshiba Satellite Pro
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #0: Mon Jun 21 12:51:03 CEST 2004
    [_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/VULGUS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d00000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0d002e4.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0d00390.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0d0043c.
Preloaded elf module "/boot/kernel/aio.ko" at 0xc0d004e8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0d00590.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.90GHz (1893.87-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>real memory  = 536674304 (511 MB)
avail memory = 507437056 (483 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc0ad6d02 (1000022)
VESA: NVidia
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750     > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f01a0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 11
pcib0: slot 31 INTA is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 10
nvidia0: <GeForce4 420 Go> mem 0xdbf80000-0xdbffffff,0xdc000000-0xdfffffff,0xfd000000-0xfdffffff irq 10 at device 0.0 on pci1
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xefe0-0xefff irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Optical Mouse, rev 1.10/21.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ugen0: OmniVision OV511+ Camera, rev 1.00/1.00, addr 3
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xef80-0xef9f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 7 INTA is routed to irq 11
pcib2: slot 8 INTA is routed to irq 11
pcib2: slot 13 INTA is routed to irq 11
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfcef8000-0xfcefbfff,0xfceff800-0xfcefffff irq 11 at device 7.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:9c:a7
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0xfcef7000-0xfcef7fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: slot 11 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: slot 11 INTB is routed to irq 11
cbb1: [MPSAFE]
pci2: <base peripheral> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0xcfa0-0xcfaf,0xcfe4-0xcfe7,0xcfe8-0xcfef,0xcff4-0xcff7,0xcff8-0xcfff irq 11 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <Intel ICH3 (82801CA)> port 0xcdc0-0xcdff,0xce00-0xceff irq 11 at device 31.5 on pci0
pcm0: <Yamaha YMF753 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1893865008 Hz quality 800
Timecounters tick every 10.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
GEOM: create disk ad0 dp=0xc4dd1760
ad0: 28615MB <TOSHIBA MK3018GAS> [58140/16/63] at ata0-master UDMA100
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2612> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
/tmp: mount pending error: blocks 0 files 1
/tmp: superblock summary recomputed
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 12 files 3
/usr: superblock summary recomputed
WARNING: /var was not properly dismounted