Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 10:33:33
From: Ian
Description: DELL OPTIPLEX GX 270 Multiprocessor Kernel works good with HyperThreading Pentium. Needs BIOS setting for "Legacy" applications video ram changed from 1 to 8 to get X working right.
NetBSD 2.0_BETA (iharding) #0: Thu May 13 14:25:35 UTC 2004 iharding@:/usr/src/sys/arch/i386/compile/iharding total memory = 503 MB avail memory = 484 MB BIOS32 rev. 0 found at 0xffe90 mainbus0 (root) cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel Pentium 4 (686-class), 2394.08 MHz, id 0xf29 cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX> cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF> cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way cpu0: L2 cache 512 KB 64b/line 8-way cpu0: ITLB 4K/4M: 64 entries cpu0: DTLB 4K/4M: 64 entries cpu0: calibrating local timer cpu0: apic clock running at 199 MHz cpu0: 16 page colors cpu1 at mainbus0: apid 1 (application processor) cpu1: starting cpu1: Intel Pentium 4 (686-class), 2394.01 MHz, id 0xf29 cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX> cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF> cpu1: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way cpu1: L2 cache 512 KB 64b/line 8-way cpu1: ITLB 4K/4M: 64 entries cpu1: DTLB 4K/4M: 64 entries ioapic0 at mainbus0 apid 2 (I/O APIC) ioapic0: pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0 ioapic0: remapped to apic 2 acpi0 at mainbus0 acpi0: using Intel ACPI CA subsystem version 20040211 acpi0: X/RSDT: OemId <DELL , GX270 ,00000007>, AslId <ASL ,00000061> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present ACPI Object Type `Processor` (0x0c) at acpi0 not configured ACPI Object Type `Processor` (0x0c) at acpi0 not configured PNP0C0C at acpi0 not configured PNP0C01 at acpi0 not configured PNP0A03 at acpi0 not configured PNP0200 at acpi0 not configured PNP0C04 at acpi0 not configured PNP0000 at acpi0 not configured PNP0800 at acpi0 not configured PNP0B00 at acpi0 not configured PNP0100 at acpi0 not configured PNP0700 at acpi0 not configured PNP0303 at acpi0 not configured PNP0F13 at acpi0 not configured PNP0501 at acpi0 not configured PNP0401 at acpi0 not configured PNP0C01 at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82865 Host (rev. 0x02) pchb0: random number generator enabled agp0 at pchb0: detected 8060k stolen memory agp0: aperture at 0xe8000000, size 0x8000000 vga1 at pci0 dev 2 function 0: Intel 82865G Integrated Graphics Device (rev. 0x02) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller #0 (rev. 0x02) uhci0: interrupting at ioapic0 pin 16 (irq 11) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller #1 (rev. 0x02) uhci1: interrupting at ioapic0 pin 19 (irq 10) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2: Intel 82801EB/ER USB UHCI Controller #2 (rev. 0x02) uhci2: interrupting at ioapic0 pin 18 (irq 9) usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3: Intel 82801EB/ER USB UHCI Controller #3 (rev. 0x02) uhci3: interrupting at ioapic0 pin 16 (irq 11) usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered Intel 82801EB/ER USB EHCI Controller (USB serial bus, interface 0x20, revision 0x02) at pci0 dev 29 function 7 not configured ppb0 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0xc2) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled ahc1 at pci1 dev 7 function 0: Adaptec 2902/04/10/15/20/30C SCSI adapter ahc1: interrupting at ioapic0 pin 16 (irq 11) ahc1: aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs scsibus0 at ahc1: 8 targets, 8 luns per target ex0 at pci1 dev 9 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x74) ex0: interrupting at ioapic0 pin 18 (irq 9) ex0: MAC address [_MAC_XXXXXXXXXX] bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 6 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto wm0 at pci1 dev 12 function 0: Intel i82540EM 1000BASE-T Ethernet, rev. 2 wm0: interrupting at ioapic0 pin 18 (irq 9) wm0: 32-bit 33MHz PCI bus wm0: 256 word (8 address bits) MicroWire EEPROM wm0: Ethernet address [_MAC_XXXXXXXXXX] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto pcib0 at pci0 dev 31 function 0 pcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02) piixide0 at pci0 dev 31 function 1 piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel ignored (disabled) piixide1 at pci0 dev 31 function 2 piixide1: Intel 82801EB Serial ATA Controller (rev. 0x02) piixide1: bus-master DMA support present piixide1: primary channel configured to native-PCI mode piixide1: using ioapic0 pin 18 (irq 9) for native-PCI interrupt atabus1 at piixide1 channel 0 piixide1: secondary channel configured to native-PCI mode atabus2 at piixide1 channel 1 Intel 82801EB/ER SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured auich0 at pci0 dev 31 function 5: i82801EB (ICH5) AC-97 Audio auich0: interrupting at ioapic0 pin 17 (irq 3) auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo auich0: ac97: ext id 601<AC97_22,AMAP,VRA> isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug `n Play devices found ioapic0: enabling auich0: measured ac97 link rate at 47885 Hz, will use 48000 Hz audio0 at auich0: full duplex, mmap, independent fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated scsibus0: waiting 2 seconds for devices to settle... wd0 at atabus0 drive 0: <Maxtor 6E040L0> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 39205 MB, 79656 cyl, 16 head, 63 sec, 512 bytes/sect x 80293248 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers) cd0 at scsibus0 target 6 lun 0: <HP, CD-Writer+ 9600, 1.0a> cdrom removable cd0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs cpu1: CPU 1 running wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)