Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 11:58:26
From: ball
Description: PC with 450 MHz AMD K6-2+, FIC VA-503+ mainboard, DRI PCI modem (doesn`t work, despite not being an evil WinModem), 64 Mb of (FPM SIMM) RAM, ATI Xpert 98 (runs X beautifully). Also ran NetBSD well when it had a 225 MHz Cyrix MII microprocessor.
NetBSD 1.6.1 (ALMOND-$Revision: 2.13 $) #0: Sat Mar 20 18:23:46 GMT 2004
    root@almond:/usr/src/sys/arch/i386/compile/ALMOND-2.13
cpu0: AMD K6-2+/III+ (586-class), 450.13 MHz
cpu0: I-cache 32 KB 32b/line 2-way, D-cache 32 KB 32b/line 2-way
cpu0: L2 cache 128 KB 32b/line 4-way
cpu0: features 8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8021bf<PGE,MMX>
total memory = 65084 KB
avail memory = 58864 KB
using 839 buffers containing 3356 KB of memory
BIOS32 rev. 0 found at 0xfb340
mainbus0 (root)
pnpbios0 at mainbus0: nodes 15, max len 92
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0597 (rev. 0x04)
agp0 at pchb0: aperture at 0xe0000000, size 0xf000000
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0x8598 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x1106 product 0x0586 (rev. 0x47)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C586 (Apollo VP) ATA33 co
ntroller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 91366U4>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 13029 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 26684784 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data 
transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 7 function 2: vendor 0x1106 product 0x3038 (rev. 0x02)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 7 function 3: vendor 0x1106 product 0x3040 (rev. 0x10)
ppb1: not configured by system firmware
vendor 0x125d product 0x2898 (miscellaneous communications, revision 0x02) at pc
i0 dev 8 function 0 not configured
ex0 at pci0 dev 9 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x24)
ex0: interrupting at irq 11
ex0: MAC address xx:xx:xx:xx:xx:xx
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga0 at pci0 dev 10 function 0: vendor 0x1002 product 0x4750 (rev. 0x5c)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
isapnp0: <ESS ES1869 Plug and Play AudioD, ESS0006, , > port 0x800/8 not configu
red
ess0 at isapnp0 port 0x220/16,0x388/4,0x330/2 irq 5 drq 1,0
ess0:: ESS Technology ES1869 [version 0x688b]
ess0: audio1 interrupting at irq 5
audio0 at ess0: half duplex, mmap, independent
opl0 at ess0: model OPL3
midi0 at opl0: ESS Yamaha OPL3
isapnp0: <ESS ES1869 Plug and Play AudioD, ESS0001, , > port 0x201/1 not configu
red
apm0 at mainbus0: Power Management spec V1.2
biomask e74d netmask ef4d ttymask ffcf
ugen0 at uhub0 port 1
ugen0: vendor 0x0545 USB IMAGING DEVICE, rev 1.01/3.0a, addr 2
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: Iomega USB Zip 100, rev 1.10/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 luns per target
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <IOMEGA, ZIP 100, 11.V> SCSI0 0/direct removable
sd0: drive offline
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)