Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 12:07:52
From: John Brann
Description: Dual Pentium Pro 200MHz. Acts as Samba / nfs / mail / backup / print server for my home network.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #2: Thu May 27 10:22:09 EDT 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/FREEBIE
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium Pro (198.67-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping = 9
  Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 201326592 (196608K bytes)
avail memory = 191627264 (187136K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfec08000
 cpu1 (AP):  apic id: 12, version: 0x00040011, at 0xfec08000
 io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0413000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 18 -> irq 2
IOAPIC #0 intpin 17 -> irq 9
IOAPIC #0 intpin 16 -> irq 10
pci0: <PCI bus> on pcib0
fxp0: <Intel 82557 Pro/100 Ethernet> port 0xff40-0xff5f mem 0xff800000-0xff8ffff
f,0xffbdc000-0xffbdcfff irq 2 at device 6.0 on pci0
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xff80-0xff9f irq 11 at devic
e 7.2 on pci0
usb0: <Intel 82371SB (PIIX3) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xf000-0xf0ff mem 0xffbdd000-0xf
fbddfff irq 9 at device 9.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
ahc1: <Adaptec 2940 SCSI adapter> port 0xf800-0xf8ff mem 0xffbdf000-0xffbdffff i
rq 10 at device 11.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
dc0: <ADMtek AN985 10/100BaseTX> port 0xf400-0xf4ff mem 0xffbdec00-0xffbdefff ir
q 9 at device 15.0 on pci0
dc0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus1: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <Number Nine Imagine 128 II graphics accelerator> at 17.0 irq 2
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xca7ff,0xca800-0xcefff,0xc
f000-0xd4fff,0xe8000-0xe9fff,0xea000-0xebfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16450
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5L/0101.03> HP ENHANCED PCL5,PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc1: <Parallel port> at port 0x278-0x27f irq 7 flags 0x40 on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip1: <PLIP network interface> on ppbus1
lpt1: <Printer> on ppbus1
lpt1: Interrupt-driven port
ppi1: <Parallel I/O> on ppbus1
pcm0: <CS423x> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on isa0
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
ad0: 42934MB <WDC WD450AA-00BAA0> [87233/16/63] at ata0-master WDMA2
acd0: CDROM <TOSHIBA CD-ROM XM-5702B> at ata1-master PIO3
Waiting 5 seconds for SCSI devices to settle
sa0 at ahc1 bus 0 target 2 lun 0
sa0: <ARCHIVE Python 02779-XXX 6280> Removable Sequential Access SCSI-2 device 
sa0: 7.812MB/s transfers (7.812MHz, offset 15)
da0 at ahc0 bus 0 target 6 lun 0
da0: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
da1 at ahc0 bus 0 target 10 lun 0
da1: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
cd0 at ahc1 bus 0 target 3 lun 0
cd0: <TOSHIBA CD-ROM XM-3801TA 3386> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: cd present [169861 x 2048 byte records]
Mounting root from ufs:/dev/da0s1a