Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 13:05:05
From: Poobah
Description: NetBSD 2.0F on: AMD Athlon XP 1800 Asus VIA Apollo Pro 266 mb Onboard sound, video, and ethernet configured, plus second ethernet card.
NetBSD 2.0F (BOB) #0: Sun Jun 6 00:10:43 EDT 2004 [_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/sys/arch/i386/compile/BOB total memory = 479 MB avail memory = 461 MB BIOS32 rev. 0 found at 0xfbcd0 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: AMD Athlon XP 1800+ (686-class), 1533.15 MHz, id 0x681 cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX> cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW> cpu0: "AMD Athlon(tm) XP 1800+" cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way cpu0: L2 cache 256 KB 64b/line 16-way cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way cpu0: 8 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: VIA Technologies product 0x3116 (rev. 0x00) agp0 at pchb0: aperture at 0xd0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0: VIA Technologies VT8633 (Apollo Pro 266) CPU-AGP Bridge (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: S3 product 0x8d04 (rev. 0x00) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 ne2 at pci0 dev 7 function 0: Realtek 8029 Ethernet ne2: Ethernet address [_MAC_XXXXXXXXXX] ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto ne2: interrupting at irq 10 uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x80) uhci0: interrupting at irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x80) uhci1: interrupting at irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x80) uhci2: interrupting at irq 10 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface 0x20, revision 0x82) at pci0 dev 16 function 3 not configured pcib0 at pci0 dev 17 function 0 pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00) viaide0 at pci0 dev 17 function 1 viaide0: VIA Technologies VT8235 ATA133 controller viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC`97 Audio (rev 0x50) auvia0: interrupting at irq 10 auvia0: ac97: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D auvia0: ac97: ext id 5c7<AC97_22,LDAC,SDAC,CDAC,SPDIF,DRA,VRA> audio0 at auvia0: full duplex, mmap, independent vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet vr0: interrupting at irq 11 vr0: Ethernet address: [_MAC_XXXXXXXXXX] ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x0002c6, model 0x0032, rev. 5 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug `n Play devices found fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated IPsec: Initialized Security Association Processing. wd0 at atabus0 drive 0: <Maxtor 6E040L0> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 39205 MB, 79656 cyl, 16 head, 63 sec, 512 bytes/sect x 80293248 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)