Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 13:06:43
From: ratpoison-thor
Description: XP 1600+ 256 MB Ram 64 MB Geforce2 40+80+120GB HD CD-Writer System used as a workstation, in the near future planned for file-serving
$ dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) XP 1600+ (1399.77-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 268435456 (262144K bytes)
avail memory = 255750144 (249756K bytes)
Preloaded elf kernel "kernel" at 0xc0551000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdd60
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0111 graphics accelerator> at 0.0 irq 5
pci0: <unknown card> (vendor=0x4005, dev=0x4000) at 9.0 irq 9
rl0: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem 0xef000000-0xef0000ff irq 11 at device 10.0 on pci0
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xc800-0xc80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 11 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 11 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3059) at 17.5 irq 11
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100
ad1: 76319MB <WDC WD800BB-00CAA1> [155061/16/63] at ata0-slave UDMA100
ad3: UDMA ICRC error reading fsbn 234492993 of 0-3 (ad3 bn 234492993; cn 232631 tn 15 sn 0) retrying
ad3: UDMA ICRC error reading fsbn 234492993 of 0-3 (ad3 bn 234492993; cn 232631 tn 15 sn 0) retrying
ad3: UDMA ICRC error reading fsbn 234492993 of 0-3 (ad3 bn 234492993; cn 232631 tn 15 sn 0) retrying
ad3: UDMA ICRC error reading fsbn 234492993 of 0-3 (ad3 bn 234492993; cn 232631 tn 15 sn 0) falling back to PIO mode
ad3: 114498MB <SAMSUNG SV1203N> [232632/16/63] at ata1-slave PIO4
acd0: CD-RW <R/RW 12x8x32> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
Waiting (max 60 seconds) for system process `vnlru` to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon` to stop...stopped
Waiting (max 60 seconds) for system process `syncer` to stop...stopped
 
syncing disks... 4
done
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) XP 1600+ (1399.77-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 268435456 (262144K bytes)
avail memory = 255750144 (249756K bytes)
Preloaded elf kernel "kernel" at 0xc0551000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdd60
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0111 graphics accelerator> at 0.0 irq 5
pci0: <unknown card> (vendor=0x4005, dev=0x4000) at 9.0 irq 9
rl0: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem 0xef000000-0xef0000ff irq 11 at device 10.0 on pci0
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xc800-0xc80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 11 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 11 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3059) at 17.5 irq 11
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100
ad1: 76319MB <WDC WD800BB-00CAA1> [155061/16/63] at ata0-slave UDMA100
ad3: UDMA ICRC error reading fsbn 234492993 of 0-3 (ad3 bn 234492993; cn 232631 tn 15 sn 0) retrying
ad3: UDMA ICRC error reading fsbn 234492993 of 0-3 (ad3 bn 234492993; cn 232631 tn 15 sn 0) retrying
ad3: UDMA ICRC error reading fsbn 234492993 of 0-3 (ad3 bn 234492993; cn 232631 tn 15 sn 0) retrying
ad3: UDMA ICRC error reading fsbn 234492993 of 0-3 (ad3 bn 234492993; cn 232631 tn 15 sn 0) falling back to PIO mode
ad3: 114498MB <SAMSUNG SV1203N> [232632/16/63] at ata1-slave PIO4
acd0: CD-RW <R/RW 12x8x32> at ata1-master WDMA2
Mounting root from ufs:/dev/ad3s3a
ad3: WRITE command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. done
ad3: timeout waiting for DRQ - resetting
ata1: resetting devices .. done
ad3: timeout waiting for DRQ - resetting
ata1: resetting devices .. done
ad3: timeout waiting for DRQ - resetting
ata1: resetting devices .. done