Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 13:31:42
From: RaD|Tz
Description: Duron 1200+ 128 MB RAM
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #0: Tue Jun  1 18:39:51 CDT 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/LILI
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Duron(tm) Processor (892.50-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x631  Stepping = 1
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory  = 117374976 (114624K bytes)
avail memory = 108507136 (105964K bytes)
Preloaded elf kernel "kernel" at 0xc058a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 4 entries at 0xc00f8350
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
atapci0: <SiS 5591 ATA100 controller> port 0xff00-0xff0f at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
sis0: <SiS 900 10/100BaseTX> port 0xcc00-0xccff mem 0xcfff7000-0xcfff7fff irq 5 at device 1.1 on pci0
sis0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0: <SiS 5571 USB controller> mem 0xcfffc000-0xcfffcfff irq 3 at device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ugen0: Color FlatbedScanner 23, rev 1.00/0.42, addr 2
ohci1: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 3 at device 1.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pcm0: <SiS 7018> port 0xd000-0xd0ff mem 0xcfffe000-0xcfffefff irq 11 at device 1.4 on pci0
pcm0: <VIA Technologies VIA1612A AC97 Codec>
pci0: <unknown card> (vendor=0x1039, dev=0x7013) at 1.6 irq 5
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 2.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <SiS model 6300 VGA-compatible display device> at 0.0
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd3fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 28629MB <WDC WD300BB-00DEA0> [58168/16/63] at ata0-master UDMA100
acd0: CD-RW <HL-DT-ST GCE-8400B> at ata1-master PIO4
acd1: CDROM <GCR-8521B> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST CD-RW GCE-8400B 1.02> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ata1 bus 0 target 1 lun 0
cd1: <HL-DT-ST CD-ROM GCR-8521B 1.00> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present