Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 13:42:25
From: DashEvil
Description: AMD Duron 1.1Ghz, VIA Motherboard
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #0: Wed May 26 15:45:12 GMT 2004
    xxx@xxx.xxx:/usr/src/sys/i386/compile/DASHEVIL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc079b000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc079b1f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Duron(tm) processor (1110.95-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x670  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory  = 268369920 (255 MB)
avail memory = 255234048 (243 MB)
ACPI APIC Table: <VT8375 MSI ACPI>
ioapic0 <Version 0.2> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VT8375 MSI ACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdd60
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pcib0: could not get PCI interrupt routing table for \_SB_.PCI0 - AE_BAD_DATA
pci0: <ACPI PCI bus> on pcib0
pcib0: possible interrupts:  21
pcib0: slot 17 INTD routed to irq 21 via \_SB_.PCI0.ALKD
pcib0: possible interrupts:  21
pcib0: slot 17 INTD routed to irq 21 via \_SB_.PCI0.ALKD
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
pcm0: <Creative EMU10K1> port 0xa000-0xa01f irq 17 at device 6.0 on pci0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xe2000000-0xe20000ff irq 17 at device 14.0 on pci0
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233A UDMA133 controller> port 0xac00-0xac0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 21 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uaudio0: audio descriptors make no sense, error=4
device_probe_and_attach: uaudio0 attach returned 6
ugen0: vendor 0x043e product 0x8585, rev 0.00/0.00, addr 2
ums0: B16_b_02 USB-PS/2 Optical Mouse, rev 2.00/98.02, addr 3, iclass 3/1
ums0: 4 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 21 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xc0000-0xcc7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1110946169 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
GEOM: create disk ad0 dp=0xc2a10760
ad0: 57259MB <MAXTOR 6L060J3> [116336/16/63] at ata0-master UDMA133
acd0: CDROM <LG CD-ROM CRD-8522B> at ata0-slave PIO4
acd1: CDRW <HL-DT-ST GCE-8481B> at ata1-master PIO4
acd2: DVDROM <IDE DVD-ROM 16X> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s2a