Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 14:45:17
From: ppl
Description: Dual 2400+ MP
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #7: Thu Nov 13 20:23:04 AST 2003
    root@ataraxia:/usr/obj/usr/src/sys/ATARAXIA
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) MP 2400+ (2000.08-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 1073217536 (1048064K bytes)
avail memory = 1041227776 (1016824K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
 cpu0 (BSP): apic id:  1, version: 0x00040010, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0347000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 268435454 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> mem 0xe0400000-0xe0400fff,0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1022 device=700d)> at device 1.0 on pci0
IOAPIC #0 intpin 18 -> irq 2
pci1: <PCI bus> on pcib1
pci1: <ATI model 4966 graphics accelerator> at 5.0 irq 2
pci1: <ATI model 496e graphics accelerator> at 5.1
isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 ATA100 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip0: <PCI to Other bridge (vendor=1022 device=7443)> at device 7.3 on pci0
pcib2: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
IOAPIC #0 intpin 19 -> irq 5
IOAPIC #0 intpin 16 -> irq 9
IOAPIC #0 intpin 17 -> irq 10
pci2: <PCI bus> on pcib2
pci2: <OHCI USB controller> at 0.0 irq 5
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x3000-0x307f mem 0xe0101000-0xe010107f irq 9 at device 4.0 on pci2
xl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0x3400-0x341f irq 10 at device 5.0 on pci2
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0x3080-0x30ff mem 0xe0101400-0xe010147f irq 5 at device 8.0 on pci2
xl0: reset didn`t complete
xl1: Ethernet address: xx:xx:xx:xx:xx:xx
miibus1: <MII bus> on xl1
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcd7ff,0xe0000-0xe3fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 76319MB <WDC WD800JB-00ETA0> [155061/16/63] at ata0-master UDMA100
ad1: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-slave UDMA100
Mounting root from ufs:/dev/ad0s1a