Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-25 14:48:30
From: dj3mc
Description: DELL C800
OpenBSD 3.5 (MYKERNEL) #0: Mon May  3 19:39:43 CEST 2004
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 848 MHz
real mem  = 536367104 (523796K)
avail mem = 493924352 (482348K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/03/03, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfbc20/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02: rng active, 7Kb/sec
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage 128 Mobility MF" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x02
pci2 at ppb1 bus 2
esa0 at pci2 dev 3 function 0 "ESS Maestro 3" rev 0x10: irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esa0
xl0 at pci2 dev 6 function 0 "3Com 3c556 100Base-TX" rev 0x10: irq 10 address xx:xx:xx:xx:xx:xx
ukphy0 at xl0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c000, model 0x0000, rev. 0
"3Com Mini-PCI V.90 Modem" rev 0x10 at pci2 dev 6 function 1 not configured
cbb0 at pci2 dev 15 function 0 "Texas Instruments PCI4451 CardBus" rev 0x00: irq 10
cbb1 at pci2 dev 15 function 1 "Texas Instruments PCI4451 CardBus" rev 0x00: irq 10
fwohci0 at pci2 dev 15 function 2 "Texas Instruments PCI4451 FireWire" rev 0x00: irq 10
fwohci0: OHCI 1.0, xx:xx:xx:xx:xx:xx:84:10, 400Mb/s, 2048 max_rec, 4 iso_ctx
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS05-0>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 3.7C> SCSI0 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x02: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4440 netmask 4440 ttymask 54c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
fw at fwohci0 not configured
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0, rev 1.10/2.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0