Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-25 14:52:19
From: jpeg
Description: Server - Athlon XP 2400+ - RAM 1GB - 2xHDD 80GB ATA, 2xHDD 120GB ATA - RAID hard onboard - 2xEth. 100Mbps - CD-R/RW.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #1: Wed May 26 22:38:28 CEST 2004
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a43000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a43244.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2400+ (2000.86-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 1073676288 (1023 MB)
avail memory = 1033502720 (985 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <KT400  AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdd00
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: possible interrupts:  22
pcib0: slot 17 INTC routed to irq 22 via \_SB_.PCI0.ALKC
pcib0: possible interrupts:  23
pcib0: slot 18 INTA routed to irq 23 via \_SB_.PCI0.ALKD
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa000-0xa07f mem 0xe6025000-0xe602507f irq 17 at device 8.0 on pci0
xl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0: <Texas Instruments TSB43AB23> mem 0xe6020000-0xe6023fff,0xe6024000-0xe60247ff irq 16 at device 13.0 on pci0
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:8b:de
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: xx:xx:xx:xx:xx:xx
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 19 at device 14.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 17 at device 14.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 14.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xb800-0xb80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc000-0xc0ff mem 0xe6028000-0xe60280ff irq 23 at device 18.0 on pci0
vr0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port 0xd400-0xd4ff,0xd000-0xd003,0xcc00-0xcc07,0xc800-0xc803,0xc400-0xc407 irq 18 at device 19.0 on pci0
atapci1: [MPSAFE]
ata2: at 0xc400 on atapci1
ata2: [MPSAFE]
ata3: at 0xcc00 on atapci1
ata3: [MPSAFE]
atapci2: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port 0xe800-0xe8ff,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807 irq 18 at device 19.1 on pci0
atapci2: [MPSAFE]
ata4: at 0xd800 on atapci2
ata4: [MPSAFE]
ata5: at 0xe000 on atapci2
ata5: [MPSAFE]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2000855357 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
acd0: CDROM <SAMSUNG CD-ROM SC-152L> at ata0-master WDMA2
GEOM: create disk ad4 dp=0xc6a8e260
ad4: 78167MB <Maxtor 6Y080P0> [158816/16/63] at ata2-master UDMA133
GEOM: create disk ad6 dp=0xc6cac660
ad6: 78167MB <Maxtor 6Y080P0> [158816/16/63] at ata3-master UDMA133
GEOM: create disk ad8 dp=0xc6a8ed60
ad8: 117246MB <Maxtor 6Y120P0> [238216/16/63] at ata4-master UDMA133
GEOM: create disk ad10 dp=0xc6a8eb60
ad10: 117246MB <Maxtor 6Y120P0> [238216/16/63] at ata5-master UDMA133
GEOM: create disk ar0 dp=0xc6a861e0
ar0: 78167MB <ATA RAID1 array> [9964/255/63] status: READY subdisks:
 disk0 READY on ad4 at ata2-master
 disk1 READY on ad6 at ata3-master
GEOM: create disk ar1 dp=0xc6a881e0
ar1: 117246MB <ATA RAID1 array> [14946/255/63] status: READY subdisks:
 disk0 READY on ad8 at ata4-master
 disk1 READY on ad10 at ata5-master
Mounting root from ufs:/dev/ar0s1a