Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-25 15:13:00
From: r2d2
Description: AMD Barton Mobile @ 2,736 GHZ , 1GB Ram , AN7 Board , 2x36GB WDD Raptor raid 0 on FreeBSD 5.2.1
Copyright (c) 1992-2004 The FreeBSD Project.
Jun 25 20:19:19 Big-MAMA kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #2: Sat May  8 21:37:16 CEST 2004
 XXX@XXX:/usr/obj/usr/src/sys/3waretztzUSB
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07cb000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc07cb244.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc07cb2f0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07cb39c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Unknown CPU Typ (2736.22-MHz 686-class CPU)
Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 1073676288 (1023 MB)
avail memory = 1037701120 (989 MB)
mptable_probe: MP Config Table has bad signature: N
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fddf0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (214.0C)
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf0-0xcf3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 1 INTA is routed to irq 4
pcib0: slot 5 INTA is routed to irq 7
pcib0: slot 6 INTA is routed to irq 3
agp0: <NVIDIA nForce2 AGP Controller> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0pci0: <memory, RAM> at device 0.1 (no driver attached)pci0: <memory, RAM> at device 0.2 (no driver attached)pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe8084000-0xe8084fff at device 2.0 on pci0
pcib0: slot 2 INTA is routed to irq 10
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: vendor 0x0c45 product 0x1050, rev 1.10/1.10, addr 2
ohci1: <OHCI (generic) USB controller> mem 0xe8082000-0xe8082fff at device 2.1 on pci0
pcib0: slot 2 INTB is routed to irq 5
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pcm0: <Nvidia nForce2> port 0xd000-0xd07f,0xe000-0xe0ff mem 0xe8080000-0xe8080fff irq 3 at device 6.0 on pci0
pcm0: <Avance Logic ALC658 AC97 Codec>
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 6 INTA is routed to irq 11
pcib1: slot 8 INTA is routed to irq 10
twe0: <3ware 7000 series Storage Controller. Driver version[_IP_XXXXXX]> port 0xa000-0xa00f mem 0xe7000000-0xe77fffff,0xe7800000-0xe780000f irq 11 at device 6.0 on pci1
twe0: 2 ports, Firmware FE7S[_IP_XXXXXX], BIOS BE7X[_IP_XXXXXX]
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 0xe7801000-0xe78010ff irq 10 at device 8.0 on pci1
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device 9.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 0 INTA is routed to irq 5
pci2: <display, VGA> at device 0.0 (no driver attached)
pci2: <display> at device 0.1 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
orm0: <Option ROMs> at iomem 0xd8000-0xd8fff,0xd0000-0xd7fff,0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2736222628 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc6607060
ad0: 114473MB <ST3120026A> [232581/16/63] at ata0-master UDMA100
acd0: DVDR <PLEXTOR DVDR PX-708A> at ata1-master UDMA33
twed0: <Unit 0, RAID0, Normal> on twe0
twed0: 70607MB (144603392 sectors)
GEOM: create disk twed0 dp=0xc6711e0c
GEOM: create disk cd0 dp=0xc6549e00
GEOM: create disk da0 dp=0xc674e850
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PLEXTOR DVDR   PX-708A 1.06> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB MASS STORAGE DEVICE 0.10> Removable Direct Access SCSI-2 device 
da0: 1.000MB/s transfers
da0: 61MB (125184 512 byte sectors: 64H 32S/T 61C)
Mounting root from ufs:/dev/twed0s1a