Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-26 03:43:39
From: ookami
Description:
NetBSD 2.0_BETA (LIDELL-$Revision:[_IP_XXXX] $) #0: Fri Jun 25 17:41:07 CEST 2004 [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/LIDELL total memory = 1023 MB avail memory = 994 MB BIOS32 rev. 0 found at 0xfb3f0 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: AMD Duron (686-class), 1597.71 MHz, id 0x680 cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX> cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW> cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way cpu0: L2 cache 64 KB 64b/line 16-way cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way cpu0: 8 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Nvidia Corporation nForce2 Host-PCI Bridge (rev. 0xc1) agp at pchb0 not configured Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 1 not configured Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 2 not configured Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 3 not configured Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 4 not configured Nvidia Corporation nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 5 not configured pcib0 at pci0 dev 1 function 0 pcib0: Nvidia Corporation nForce2 PCI-ISA bridge (rev. 0xa3) Nvidia Corporation nForce2 SMBus Controller (SMBus serial bus, revision 0xa2) at pci0 dev 1 function 1 not configured ohci0 at pci0 dev 2 function 0: Nvidia Corporation nForce2 USB Host Controller (rev. 0xa3) ohci0: interrupting at irq 10 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Nvidia Corporat OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 2 function 1: Nvidia Corporation nForce2 USB Host Controller (rev. 0xa3) ohci1: interrupting at irq 11 ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Nvidia Corporat OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered Nvidia Corporation nForce2 MCP-T Audio Processing Unit (audio multimedia, revision 0xa2) at pci0 dev 5 function 0 not configured auich0 at pci0 dev 6 function 0: nForce2 MCP-T AC-97 Audio auich0: interrupting at irq 10 auich0: ac97: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D auich0: ac97: ext id 5c7<AC97_22,LDAC,SDAC,CDAC,SPDIF,DRA,VRA> ppb0 at pci0 dev 8 function 0: Nvidia Corporation nForce2 PCI-PCI bridge (rev. 0xa3) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled rtk0 at pci1 dev 6 function 0: Realtek 8139 10/100BaseTX rtk0: interrupting at irq 11 rtk0: Ethernet address [_MAC_XXXXXXXXXX] ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface ukphy0: OUI 0x000000, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ex0 at pci1 dev 8 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78) ex0: interrupting at irq 10 ex0: MAC address [_MAC_XXXXXXXXXX] exphy0 at ex0 phy 24: 3Com internal media interface exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto viaide0 at pci0 dev 9 function 0 viaide0: NVIDIA nForce2 IDE Controller (rev. 0xa2) viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 ppb1 at pci0 dev 30 function 0: Nvidia Corporation nForce2 PCI-PCI Bridge (rev. 0xc1) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled vga1 at pci2 dev 0 function 0: Matrox MGA G550 AGP (rev. 0x01) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug `n Play devices found auich0: measured ac97 link rate at 47995 Hz, will use 48000 Hz audio0 at auich0: full duplex, mmap, independent Kernelized RAIDframe activated wd0 at atabus0 drive 0: <Maxtor 6E040L0> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 39205 MB, 79656 cyl, 16 head, 63 sec, 512 bytes/sect x 80293248 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: <GCR-8523B, , 1.01> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2 cd1 at atapibus0 drive 1: <24X10, , P.JJ> cdrom removable cd1: 32-bit data port cd1: drive supports PIO mode 4, DMA mode 2 cd0(viaide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers) cd1(viaide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)