Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2004-06-25 16:26:04
From: hbent
Description: Compaq Proliant 1600
NetBSD 2.0_BETA (proliant) #7: Sun May 30 18:58:58 EDT 2004
        root@appolonia:/usr/src/sys/arch/i386/compile/proliant
total memory = 319 MB
avail memory = 308 MB
BIOS32 rev. 0 found at 0xf0000
PCI BIOS rev. 2.1 found at 0xf0080
pcibios: config mechanism [1][x], special cycles [1][x], last bus 2
PCI BIOS has 8 Interrupt Routing table entries
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium II (686-class), 448.83 MHz, id 0x652
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (AGP disabled) (rev. 0x02)
pchb0: fixing Idle/Pipeline DRAM Leadoff Timing
vga0 at pci0 dev 11 function 0: Cirrus Logic CL-GD5446 (rev. 0x45)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb0 at pci0 dev 13 function 0: Digital Equipment DECchip 21150 PCI-PCI Bridge (
rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
tl0 at pci1 dev 7 function 0
tl0: Compaq ProLiant Integrated Netelligent 10/100 TX
tl0: Ethernet address [_MAC_XXXXXXXXXX]
tl0: interrupting at irq 5
nsphy0 at tl0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0 at tl0 phy 31: Generic IEEE 802.3u media interface
ukphy0: ThunderLAN 10BASE-T media interface (OUI 0x080028, model 0x0001), rev. 5
ukphy0: 10baseT, 10baseT-FDX, auto
esiop0 at pci1 dev 9 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at irq 9
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci1 dev 9 function 1: Symbios Logic 53c875 (ultra-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at irq 10
scsibus1 at esiop1: 16 targets, 8 luns per target
ppb1 at pci1 dev 11 function 0: IBM 82351 PCI-PCI Bridge (rev. 0x07)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
cac0 at pci2 dev 0 function 0: Compaq Smart Array 3200
cac0: interrupting at irq 15
ld0 at cac0 unit 0: RAID5 array
ld0: 26029 MB, 6610 cyl, 128 head, 63 sec, 512 bytes/sect x 53309280 sectors
ohci0 at pci1 dev 13 function 0: Opti RM861HA (rev. 0x10)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Opti OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Compaq product 0xa0f0 (miscellaneous system) at pci0 dev 14 function 0 not confi
gured
rtk0 at pci0 dev 18 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy1 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000000, model 0x0000, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 20 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 20 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
Intel 82371AB USB Host Controller (PIIX4) (USB serial bus, revision 0x01) at pci
0 dev 20 function 2 not configured
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revisio
n 0x02) at pci0 dev 20 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
isapnp0: <ESS ES1868 Plug and Play AudioD, ESS0000, , > port 0x800/8 not configu
red
ess0 at isapnp0 port 0x220/16,0x388/4,0x300/2 irq 7 drq 1,0
ess0:: ESS Technology ES1868 [version 0x688b]
ess0: audio1 interrupting at irq 7
audio0 at ess0: half duplex, mmap, independent
opl0 at ess0: model OPL3
midi1 at opl0: ESS Yamaha OPL3
joy0 at isapnp0 port 0x201/1
joy0: ESS ES1868 Plug and Play AudioD 
joy0: joystick not connected
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <CD-ROM CDU701-Q, , 1.0r> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)