Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 16:29:55
From: hbent
Description: Apple Power Macintosh G3/300 (Beige) tower with "Wings" A/V card
NetBSD 1.6.1 (PlanB) #2: Tue May 25 19:49:11 EDT 2004
root@PlanB:/usr/src/usr/src/sys/arch/macppc/compile/PlanB
total memory = 256 MB
avail memory = 230 MB
using 2048 buffers containing 13208 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary)
cpu0: HID0 8290c0a4<EMCP,ECLK,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>
cpu0: 305.09 MHz
cpu0: 1MB backside cache
grackle0 at mainbus0
pci0 at grackle0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x40)
ahc0 at pci0 dev 13 function 0
ahc0: interrupting at irq 23
ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs
scsibus0 at ahc0: 8 targets, 8 luns per target
fxp0 at pci0 dev 15 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 25
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus1 at mesh0: 8 targets, 8 luns per target
bm0 at obio0 offset 0x11000 irq 42,33: address [_MAC_XXXXXXXXXX]
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs0 at obio0 offset 0x14000: irq 17,8,9
audio0 at awacs0: full duplex
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
wdc0 at obio0 offset 0x20000 irq 13: DMA transfer
wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLlct15 07>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 7162 MB, 15522 cyl, 15 head, 63 sec, 512 bytes/sect x 14668290 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at wdc0 channel 0 drive 1: <ST36421A>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 6150 MB, 13330 cyl, 15 head, 63 sec, 512 bytes/sect x 12596850 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd1(wdc0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wdc1 at obio0 offset 0x21000 irq 14: DMA transfer
atapibus0 at wdc1 channel 0: 2 targets
cd0 at atapibus0 drive 0: <IDE DVD-ROM 16X, , VER 2.0> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
adb0 at obio0 offset 0x16000 irq 18: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0: console keyboard
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0 mux 0
ofb0 at pci0 dev 18 function 0: ATI Technologies 3D Rage Pro
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <QUANTUM, FIREBALL ST2.1S, 0F0C> SCSI2 0/direct
fixed
sd0: 2068 MB, 7068 cyl, 3 head, 199 sec, 512 bytes/sect x 4235629 sectors
sd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
cd1 at scsibus0 target 3 lun 0: <MATSHITA, CD-ROM CR-8012, 1.0f> SCSI2 5/cdrom r
emovable
cd1: sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
scsibus1: waiting 2 seconds for devices to settle...