Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-25 16:32:57
From: avleewen
Description: Compaq SP700 Professional Workstation, Dual Xeon 550MHz
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #6: Mon Jun  7 22:49:53 CEST 2004
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a6f000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0a6f0cc.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a6f178.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (548.54-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
real memory  = 536870912 (512 MB)
avail memory = 515674112 (491 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  1
 cpu1 (AP): APIC ID:  0
ioapic0: Changing APIC ID to 8
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-31 on motherboard
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ ODESSA> on motherboard
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 0.1 on pci0
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.BUS2 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 30
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <Promise PDC20269 UDMA133 controller> port 0x7010-0x701f,0x7034-0x7037,0x7028-0x702f,0x7030-0x7033,0x7020-0x7027 mem 0xd7600000-0xd7603fff irq 16 at device 7.0 on pci0
ata2: at 0x7020 on atapci0
ata3: at 0x7028 on atapci0
rl0: <RealTek 8139 10/100BaseTX> port 0x7400-0x74ff mem 0xd7700000-0xd77000ff irq 21 at device 11.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <GENERIC ATA controller> port 0x7000-0x700f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
ohci0: <OHCI (generic) USB controller> mem 0xd7800000-0xd7800fff irq 25 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
pcib2: <ACPI Host-PCI bridge> on acpi0
pcib2: couldn`t find _ADR
pcib2: trying bus number 2
pci2: <ACPI PCI bus> on pcib2
sym0: <875> port 0x5000-0x50ff mem 0xd7a00000-0xd7a00fff,0xd7900000-0xd79000ff irq 28 at device 8.0 on pci2
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x5400-0x54ff mem 0xd7c00000-0xd7c00fff,0xd7b00000-0xd7b000ff irq 29 at device 8.1 on pci2
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
fwohci0: <Texas Instruments TSB12LV22> mem 0xd7e00000-0xd7e03fff,0xd7d00000-0xd7d007ff irq 24 at device 9.0 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:ff:ff
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: xx:xx:xx:xx:xx:xx
fwe0: Ethernet address: xx:xx:xx:xx:xx:xx
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x5800-0x581f mem 0xd7f00000-0xd7ffffff,0xd7500000-0xd7500fff irq 31 at device 11.0 on pci2
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: xx:xx:xx:xx:xx:xx
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0 port 0x778-0x77d,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x2f8-0x2ff irq 3 on acpi0
sio0: type 16550A
sio1 port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROMs> at iomem 0xe0000-0xe7fff,0xce000-0xd07ff,0xc8000-0xcdfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
IP Filter: v3.4.31 initialized.  Default = block all, Logging = enabled
ad4: 16446MB <ST317242A> [33416/16/63] at ata2-master UDMA33
ad6: 152627MB <WDC WD1600JB-00EVA0> [310101/16/63] at ata3-master UDMA100
ad7: 39082MB <Maxtor 54098H8> [79406/16/63] at ata3-slave UDMA100
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad4s1a