Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-25 16:35:11
From: avleeuwen
Description: Asus A7M266 (AMD761) mainboard, AMD Athlon 1333MHz, Quantum SCSI disks
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #1: Fri May 28 11:30:46 CEST 2004
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/WEBSERVER
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1333.39-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536788992 (524208K bytes)
avail memory = 517320704 (505196K bytes)
Preloaded elf kernel "kernel" at 0xc04da000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f12f0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AMD-761 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <AMD 761 host to AGP bridge> mem 0xf7800000-0xf7800fff,0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <AMD-761 PCI-PCI (4x AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 12 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4
pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 5.0 irq 11
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa000-0xa07f mem 0xf5800000-0xf580007f irq 10 at device 10.0 on pci0
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x9800-0x98ff mem 0xf5000000-0xf5000fff irq 11 at device 11.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci0: <SiS 6326 SVGA controller> at 12.0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da1s1a
da0 at ahc0 bus 0 target 4 lun 0
da0: <QUANTUM ATLAS10K3_18_WLS 020W> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 17537MB (35916548 512 byte sectors: 255H 63S/T 2235C)
da1 at ahc0 bus 0 target 6 lun 0
da1: <QUANTUM ATLAS_V_18_WLS 0230> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17510MB (35861388 512 byte sectors: 255H 63S/T 2232C)