Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-25 17:18:55
From: c1rulez
Description: Sony PCP-C1MGP Sub-Notebook running FreeBSD Everything is fine besides to the camera which won`t work in 100 years...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #14: Sat Feb 28 15:37:04 CET 2004
[_EMAIL_XXXXXXXXX]:/usr/obj/var/src/sys/KERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08b9000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc08b926c.
Preloaded elf module "/boot/kernel/radeon.ko" at 0xc08b9318.
Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc08b93c4.
Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc08b9474.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (727.84-MHz 586-class CPU)
Origin = "GenuineTMx86" Id = 0x543
real memory = 385875968 (368 MB)
avail memory = 365068288 (348 MB)
netsmb_dev: loaded
VESA: v2.0, 8192k memory, flags:0x1, mode table:0xc087c722 (1000022)
VESA: ATI MOBILITY RADEON
acpi0: <SONY E0 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 13 entries at 0xc00fdef0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 9 INTA is routed to irq 9
pcib0: slot 11 INTA is routed to irq 9
pcib0: slot 12 INTA is routed to irq 9
pcib0: slot 20 INTA is routed to irq 9
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pcm0: <Acer Labs M5451> port 0x1800-0x18ff mem 0xe8100000-0xe8100fff at device 6.0 on pci0
pcm0: <Yamaha YMF753 AC97 Codec>
pcib0: slot 6 INTA is routed to irq 9
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms> at device 8.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AA22> mem 0xe8104000-0xe8107fff,0xe8102000-0xe81027ff irq 9 at device 9.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:c5:34
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci0: <multimedia> at device 10.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x2400-0x24ff mem 0xe8102800-0xe81028ff irq 9 at device 11.0 on pci0
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
drm0: <ATI Radeon LY Mobility M6> port 0x2800-0x28ff mem 0xe8110000-0xe811ffff,0xf0000000-0xf7ffffff irq 9 at device 12.0
on pci0
info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xe8103000-0xe8103fff at device 15.0 on pci0
pcib0: slot 15 INTA is routed to irq 9
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x1400-0x140f at device 16.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <old, non-VGA display device> at device 17.0 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> at device 18.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 18 INTA is routed to irq 9
cbb0: [MPSAFE]
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xe0000-0xe0fff irq 9 at device 20.0 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
acpi_ec0: <Embedded Controller: GPE 0x1> port 0x66,0x62 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
spic0: device model type = 2
spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 irq 11 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 727841584 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging unlimited
IPsec: Initialized Security Association Processing.
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x1000-0x103f mem 0x88020000-0x8803ffff,0x88040000-0x88040fff irq 9 at device 0
.0 on cardbus0
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
GEOM: create disk ad0 dp=0xc23b2660
ad0: 57231MB <TOSHIBA MK6022GAX> [116280/16/63] at ata0-master UDMA100
(probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe7:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe7:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe7:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe7:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe7:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe7:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe7:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe7:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe7:umass-sim0:0:0:0): Medium not present
(probe7:umass-sim0:0:0:0): Unretryable error
Mounting root from ufs:/dev/ad0s1a
drm0: [MPSAFE]