Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 17:50:16
From: rehren
Description: dell 1550 freebsd 5.2-release
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #0: Fri Jun 25 09:41:15 PDT 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/BEAST
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07eb000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07eb1f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (997.46-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536805376 (511 MB)
avail memory = 515952640 (492 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   PA1550  > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fc730
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 1 INTA is routed to irq 11
pcib0: slot 2 INTA is routed to irq 10
pcib0: slot 15 INTA is routed to irq 7
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem 0xfe100000-0xfe1fffff,0xfe2ff000-0xfe2fffff irq 11 at device 1.0 on pci0
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xec80-0xecbf mem 0xfe000000-0xfe0fffff,0xfe2fe000-0xfe2fefff irq 10 at device 2.0 on pci0
fxp1: Ethernet address xx:xx:xx:xx:xx:xx
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x8b0-0x8bf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 5 INTA is routed to irq 6
pcib2: slot 5 INTB is routed to irq 5
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem 0xfeaff000-0xfeafffff irq 6 at device 5.0 on pci2
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeafe000-0xfeafefff irq 5 at device 5.1 on pci2
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
fdc0: cannot reserve interrupt line
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
fdc0: cannot reserve interrupt line
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xc8000-0xcdfff,0xc0000-0xc7fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0: cannot reserve interrupt line
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 997463278 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized.  Default = block all, Logging = enabled
acd0: CDROM <TEAC CD-ROM CD-224E> at ata0-master PIO4
GEOM: create disk da0 dp=0xc453c050
GEOM: create disk da1 dp=0xc440f450
ses0 at ahc0 bus 0 target 6 lun 0
ses0: <DELL 1x3 U2W SCSI BP 1.21> Fixed Processor SCSI-2 device 
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahc0 bus 0 target 0 lun 0
da0: <MAXTOR ATLAS10K4_36SCA DFM0> Fixed Direct Access SCSI-3 device 
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <MAXTOR ATLAS10K4_36SCA DFM0> Fixed Direct Access SCSI-3 device 
da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
Mounting root from ufs:/dev/da0s1a
ohci0: <OHCI (generic) USB controller> mem 0xfe2fc000-0xfe2fcfff irq 7 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered