Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-25 18:22:58
From: robsn
Description: athlon @ 900MHz 512 MB RAM my router/fileserver
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #3: Thu May 27 21:59:18 CEST 2004
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a46000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a461cc.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) processor (902.05-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 511766528 (488 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdcf0
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 12
pcib0: slot 7 INTD is routed to irq 12
pcib0: slot 7 INTC is routed to irq 5
pcib0: slot 9 INTA is routed to irq 11
pcib0: slot 11 INTA is routed to irq 12
pcib0: slot 12 INTA is routed to irq 10
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 10
pcib1: slot 0 INTA is routed to irq 10
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xb000-0xb00f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 12 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 12 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pci0: <multimedia, audio> at device 7.5 (no driver attached)
atapci1: <CMD 649 UDMA100 controller> port 0xd800-0xd80f,0xd400-0xd403,0xd000-0xd007,0xcc00-0xcc03,0xc800-0xc807 irq 11 at device 9.0 on pci0
atapci1: [MPSAFE]
ata2: at 0xc800 on atapci1
ata2: [MPSAFE]
ata3: at 0xd000 on atapci1
ata3: [MPSAFE]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xeb000000-0xeb00007f irq 12 at device 11.0 on pci0
xl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xeb001000-0xeb00107f irq 10 at device 12.0 on pci0
xl1: Ethernet address: xx:xx:xx:xx:xx:xx
miibus1: <MII bus> on xl1
xlphy1: <3c905C 10/100 internal PHY> on miibus1
xlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xcf000-0xcf7ff,0xcc000-0xce7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 902049879 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
GEOM: create disk ad0 dp=0xc4852460
ad0: 6197MB <IBM-DTTA-350640> [12592/16/63] at ata0-master UDMA33
acd0: CDROM <LTN483L> at ata0-slave PIO4
GEOM: create disk ad4 dp=0xc4811d60
ad4: 29196MB <SAMSUNG SV3064D> [59320/16/63] at ata2-master UDMA66
GEOM: create disk ad5 dp=0xc4915c60
ad5: 28629MB <ST330621A> [58168/16/63] at ata2-slave UDMA100
GEOM: create disk ad6 dp=0xc4915660
ad6: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata3-master UDMA100
GEOM: create disk ar0 dp=0xc480ade0
ar0: 57259MB <ATA RAID0 array> [7299/255/63] status: READY subdisks:
 disk0 READY on ad4 at ata2-master
 disk1 READY on ad5 at ata2-slave
Mounting root from ufs:/dev/ad0s1a
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /ml_tmp was not properly dismounted
WARNING: /incoming was not properly dismounted