Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 18:47:46
From: stevensontw
Description: Thinkpad R40 with Radeon 7500 Video on FreeBSD 5.2.1-p5
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p5 #11: Mon May 24 10:34:26 MDT 2004
    xxx@xxx.xxx:/usr/src/sys/i386/compile/MOBILE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0835000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0835244.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz (2192.90-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536215552 (511 MB)
avail memory = 511193088 (487 MB)
Pentium Pro MTRR support enabled
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc0753882 (1000022)
VESA: ATI MOBILITY RADEON 7500
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM    TP-1O   > on motherboard
acpi_ec0: <Embedded Controller: ECDT, GPE 0x1c, GLK> port 0x66,0x62 on acpi0
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00fded0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 11
pcib0: slot 29 INTC is routed to irq 11
pcib0: slot 29 INTD is routed to irq 11
pcib0: slot 31 INTB is routed to irq 5
pcib0: slot 31 INTB is routed to irq 5
pcib0: slot 31 INTB is routed to irq 5
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 0 INTA is routed to irq 11
pcib2: slot 7 INTA is routed to irq 11
pcib2: slot 8 INTA is routed to irq 11
cbb0: <TI1510 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2
start (50000000) < sc->membase (d0200000)
start (50000000) < sc->pmembase (f0000000)
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
pci2: <serial bus, FireWire> at device 7.0 (no driver attached)
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xd0204000-0xd0204fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xd0000800-0xd00008ff,0xd0000c00-0xd0000dff irq 5 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xd2000-0xd2fff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x80 on isa0
sc0: VGA <16 virtual consoles, flags=0x280>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2192895680 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
start (88000000) < sc->membase (d0200000)
end (ffffffff) > sc->memlimit (dfffffff)
start (88000000) < sc->pmembase (f0000000)
end (ffffffff) > sc->pmemlimit (dfffffff)
start (88000000) < sc->membase (d0200000)
end (ffffffff) > sc->memlimit (dfffffff)
start (88000000) < sc->pmembase (f0000000)
end (ffffffff) > sc->pmemlimit (dfffffff)
an0: <Cisco Systems 350 Series Wireless LAN Adapter> at port 0x100-0x13f irq 11 function 0 config 5 on pccard0
an0: got RSSI <-> dBM map
an0: Ethernet address: xx:xx:xx:xx:xx:xx
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
GEOM: create disk ad0 dp=0xc48ea360
ad0: 35736MB <IC25N040ATMR04-0> [72607/16/63] at ata0-master UDMA100
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4240N> at ata1-master UDMA33