Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 19:10:48
From: rumble
Description: IBM Thinkpad T23 running NetBSD 2.0-beta
NetBSD 2.0_BETA (T23) #10: Sun Jun 13 17:53:30 EDT 2004
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/T23
total memory = 1023 MB
avail memory = 993 MB
BIOS32 rev. 0 found at 0xfd7e0
PCI BIOS rev. 2.1 found at 0xfd8fe
pcibios: config mechanism [1][x], special cycles [x][x], last bus 8
PCI IRQ Routing Table rev. 1.0 found at 0xfdeb0, size 256 bytes (14 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX) compatible)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:29:0 0x8086 0x2482 A 0x00 11 0 already assigned
000:29:1 0x8086 0x2484 B 0x03 11 0 already assigned
000:29:2 0x8086 0x2487 C 0x02 11 0 already assigned
000:31:1 0x8086 0x248a A 0x02 11 0 fixed up
000:31:3 0x8086 0x2483 B 0x01 11 0 already assigned
000:31:5 0x8086 0x2485 B 0x01 11 0 already assigned
000:31:6 0x8086 0x2486 B 0x01 11 0 already assigned
001:00:0 0x5333 0x8c2e A 0x00 11 0 already assigned
002:00:0 0x104c 0xac51 A 0x00 11 0 already assigned
002:00:1 0x104c 0xac51 B 0x01 11 0 already assigned
002:02:0 0x1260 0x3873 A 0x02 11 0 already assigned
002:08:0 0x8086 0x1031 A 0x04 11 0 already assigned
------------------------------------------
PCI fixup examining 8086:3575
PCI fixup examining 8086:3576
PCI fixup examining 5333:8c2e
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 8086:2482
PCI fixup examining 8086:2484
PCI fixup examining 8086:2487
PCI fixup examining 8086:2448
PCI fixup examining 104c:ac51
PCI bridge 2: primary 2, secondary 3, subordinate 3
PCI fixup examining 104c:ac51
PCI bridge 3: primary 2, secondary 4, subordinate 4
PCI fixup examining 1260:3873
PCI fixup examining 8086:1031
PCI bridge 1: primary 0, secondary 2, subordinate 4
PCI fixup examining 8086:248c
PCI fixup examining 8086:248a
PCI fixup examining 8086:2483
PCI fixup examining 8086:2485
PCI fixup examining 8086:2486
PCI bus #4 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3575
10h mem 0xd0000000 0x10000000
[OK]
000:01:0 0x8086 0x3576
[OK]
000:29:0 0x8086 0x2482
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x2484
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x2487
20h port 0x00001840 0x00000020
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x248c
[OK]
000:31:1 0x8086 0x248a
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x00001860 0x00000010
24h mem 0x00000000 0x00000400
[NG]
000:31:3 0x8086 0x2483
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x2485
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
[OK]
000:31:6 0x8086 0x2486
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:00:0 0x5333 0x8c2e
10h mem 0xc0100000 0x00080000
14h mem 0xe8000000 0x04000000
18h mem 0xe4000000 0x04000000
1ch mem 0xe0000000 0x02000000
[OK]
002:00:0 0x104c 0xac51
10h mem 0x50000000 0x00001000
[OK]
002:00:1 0x104c 0xac51
10h mem 0x51000000 0x00001000
[OK]
002:02:0 0x1260 0x3873
10h mem 0xec000000 0x00001000
[OK]
002:08:0 0x8086 0x1031
10h mem 0xc0200000 0x00001000
14h port 0x00007000 0x00000040
[OK]
--------------------------[ 1 devices bogus]
Physical memory end: 0x3ff6c000
PCI memory mapped I/O space start: 0x40000000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3575
10h mem 0xd0000000 0x10000000
[OK]
000:01:0 0x8086 0x3576
[OK]
000:29:0 0x8086 0x2482
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x2484
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x2487
20h port 0x00001840 0x00000020
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x248c
[OK]
000:31:1 0x8086 0x248a
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x00001860 0x00000010
24h mem 0x40000000 0x00000400
[OK]
000:31:3 0x8086 0x2483
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x2485
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
[OK]
000:31:6 0x8086 0x2486
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:00:0 0x5333 0x8c2e
10h mem 0xc0100000 0x00080000
14h mem 0xe8000000 0x04000000
18h mem 0xe4000000 0x04000000
1ch mem 0xe0000000 0x02000000
[OK]
002:00:0 0x104c 0xac51
10h mem 0x50000000 0x00001000
[OK]
002:00:1 0x104c 0xac51
10h mem 0x51000000 0x00001000
[OK]
002:02:0 0x1260 0x3873
10h mem 0xec000000 0x00001000
[OK]
002:08:0 0x8086 0x1031
10h mem 0xc0200000 0x00001000
14h port 0x00007000 0x00000040
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium III (686-class), 1199.03 MHz, id 0x6b1
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: "Intel(R) Pentium(R) III Mobile CPU 1200MHz"
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 512 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <IBM ,TP-1A ,00001170>, AslId < LTP,00000000>
acpi0: found ECDT, GPE 28
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type `Processor` (0x0c) at acpi0 not configured
acpi: activated PNP0C0F
acpi: activated PNP0C0F
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C01 at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0800 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0 irq 13
npx1: using exception 16
PNP0B00 at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (IBM3780): aux port
pckbc2: irq 12
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
com3 at acpi0 (PNP0501)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
lpt3 at acpi0 (PNP0400)
lpt3: io 0x3bc-0x3be irq 7
com4 at acpi0 (IBM0071)
com4: io 0x2f8-0x2ff irq 3 drq 3
com4: ns16550a, working fifo
acpiec0 at acpi0 (PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
ACPI Object Type `Power` (0x0b) at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter
IBM0068 at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82830MP CPU to I/O Bridge 1 (rev. 0x02)
agp0 at pchb0: can`t find internal VGA device config space
ppb0 at pci0 dev 1 function 0: Intel 82830MP CPU to AGP Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 Savage/IXC (rev. 0x05)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA/CAM USB Controller (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA/CAM USB Controller (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x41)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00)
cbb1 at pci2 dev 0 function 1: Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00)
wi0 at pci2 dev 2 function 0: Intersil Prism2.5 Wireless Lan
wi0: interrupting at irq 11
wi0: 802.11 address [_MAC_XXXXXXXXXX]
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.1), Station (1.8.0)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 65
fxp0: interrupting at irq 11
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CAM LPC Interface (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Crystal CS4299 codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
auich0: ac97: ext id 201<AMAP,VRA>
Intel 82801CA/CAM Modem (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
isapnp0: no ISA Plug `n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
auich0: measured ac97 link rate at 39696 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Microsoft IntelliMouse, rev 1.00/1.04, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <HITACHI_DK23FB-60B>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CD-W28E, , 2.1A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)