Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 21:30:35
From: Kampai
Description: HP NetServer LD Pro
OpenBSD 3.1 (GENERIC) #59: Sat Apr 13 15:28:52 MDT 2002
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium Pro ("GenuineIntel" 686-class, 256KB L2 cache) 180 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV
real mem = 200912896 (196204K)
avail mem = 180445184 (176216K)
using 2478 buffers containing 10149888 bytes (9912K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(dd) BIOS, date 10/22/96, BIOS32 rev. 0 @ 0xf5f37
pcibios0 at bios0: rev. 2.1 @ 0xf5d50/0x1120
pcibios0: PCI BIOS has 8 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 11 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x800 0xc9000/0x4000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
ppb0 at pci0 dev 8 function 0 "DEC 21052 PCI-PCI" rev 0x01
pci1 at ppb0 bus 1
xl0 at pci1 dev 2 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 9 address [_MAC_XXXXXXXXXX]
exphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl1 at pci1 dev 3 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 11 address [_MAC_XXXXXXXXXX]
exphy1 at xl1 phy 24: Broadcom 3C905C internal PHY, rev. 6
"Intel 82375EB PCI-EISA" rev 0x15 at pci0 dev 9 function 0 not configured
ahc1 at pci0 dev 10 function 0 "Adaptec AIC-7880" rev 0x00: irq 15
ahc1: Using left over BIOS settings
ahc1: Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets
ahc1: target 5 synchronous at 4.0MHz, offset = 0xf
cd0 at scsibus0 targ 5 lun 0: <TOSHIBA, CD-ROM XM-5401TA, 3115> SCSI2 5/cdrom removable
ahc1: target 9 using 16bit transfers
ahc1: target 9 synchronous at 20.0MHz, offset = 0x8
ahc1: target 9 using tagged queuing
sd0 at scsibus0 targ 9 lun 0: <HP, 9.10GB A 80-S94C, S94C> SCSI2 0/direct fixed
sd0: 8678MB, 8387 cyl, 10 head, 211 sec, 512 bytes/sec, 17773524 sec total
eisa0 at mainbus0
eisa0: can`t map I/O space for slot 14
eisa0: can`t map I/O space for slot 15
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 8040 netmask 8a40 ttymask 9ac2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
/var: optimization changed from SPACE to TIME