Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-25 23:22:44
From: elessar
Description: Workstation: Dual P3S/1400 on Tyan Tiger 230T 1GByte RAM Mylex Raid
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #0: Tue Jun 22 11:00:47 CEST 2004
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/LOKI
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a9a000.
Preloaded elf module "/boot/modules/ntfs.ko" at 0xc0a9a1a4.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0a9a250.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family 1400MHz (1399.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS
R,SSE>
real memory = 1073741824 (1024 MB)
avail memory = 1033584640 (985 MB)
MPTable: <OEM00000 PROD00000000>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0831762 (1000022)
VESA: NVidia
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdd20
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 7 INTD routed to irq 10
pcib0: slot 7 INTD routed to irq 10
pcib0: slot 10 INTA routed to irq 10
pcib0: slot 11 INTA routed to irq 11
pcib0: slot 12 INTA routed to irq 9
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA routed to irq 11
nvidia0: <GeForce2 GTS/GeForce2 Pro> mem 0xe0000000-0xe7ffffff,0xec000000-0xecffffff irq 11 at devic
e 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xd800-0xd80f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 10 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 9.0 on pci0
pci2: <PCI bus> on pcib2
pcib2: slot 4 INTA routed to irq 5
pcib2: slot 5 INTA routed to irq 10
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xc000-0xc01f mem 0xef000000-0xef0fffff,0xf1800000-0xf1800
fff irq 5 at device 4.0 on pci2
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82558 Pro/100 Ethernet> port 0xc400-0xc41f mem 0xef100000-0xef1fffff,0xf1801000-0xf1801
fff irq 10 at device 5.0 on pci2
fxp1: Ethernet address [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <PCI-PCI bridge> at device 10.0 on pci0
pci3: <PCI bus> on pcib3
mlx0: <Mylex version 4 RAID interface> mem 0xf1000000-0xf17fffff irq 10 at device 10.1 on pci0
mlx0: DAC960PTL1, 1 channel, firmware 4.08-0-33, 8MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 34732MB (71131136 sectors) RAID 5 (online)
GEOM: create disk mlxd0 dp=0xc692360c
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xf1900000-0xf1900fff irq 11 at devic
e 11.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pcm0: <Creative EMU10K1> port 0xe000-0xe01f irq 9 at device 12.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
orm0: <Option ROM> at iomem 0xcc000-0xce7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2
on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can`t assign resources (port)
unknown: <PNP0f13> can`t assign resources (irq)
unknown: <PNP0700> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
unknown: <PNP0400> can`t assign resources (port)
Timecounters tick every 1.200 msec
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
GEOM: create disk ad0 dp=0xc6bcd460
ad0: 58644MB <Maxtor 5T060H6> [119150/16/63] at ata0-master UDMA100
GEOM: create disk cd0 dp=0xc6974600
GEOM: create disk cd1 dp=0xc6bf3e00
SMP: AP CPU #1 Launched!
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1j13> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ahc0 bus 0 target 6 lun 0
cd1: <PLEXTOR CD-R PX-R820T 1.08> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from ufs:/dev/mlxd0s4a
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 0
fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 0