Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 23:32:00
From: schnoebe
Description: HP Pavilion ze4500 Laptop (with an Atheros WiFi mini-pci card instead of the HP provided Broadcom card.)
NetBSD 2.0_BETA (ARGONAUT) #0: Sat May 22 00:56:59 CDT 2004
[_EMAIL_XXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/ARGONAUT
total memory = 446 MB
avail memory = 431 MB
BIOS32 rev. 0 found at 0xfd730
PCI BIOS rev. 2.1 found at 0xfd87b
pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
PCI IRQ Routing Table rev. 1.0 found at 0xfdf10, size 208 bytes (11 entries)
PCI Interrupt Router at 000:07:0 (Acer Labs M1543 PCI-ISA Bridge compatible)
pciintr_link_alloc: bus 0 device 2: link 0x09 invalid
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:06:0 0x10b9 0x5451 A 0x07 5 0 already assigned
000:08:0 0x10b9 0x5457 A 0x06 3 0 already assigned
000:09:0 0x168c 0x0013 A 0x03 9 0 already assigned
000:10:0 0x1217 0x6972 A 0x05 10 0 already assigned
000:12:0 0x104c 0x8026 A 0x02 10 0 already assigned
000:18:0 0x100b 0x0020 A 0x01 11 0 already assigned
001:05:0 0x1002 0x4336 A 0x00 10 0 already assigned
------------------------------------------
PCI fixup examining 1002:cab0
PCI fixup examining 1002:700f
PCI fixup examining 1002:4336
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 10b9:5237
PCI fixup examining 10b9:5451
PCI fixup examining 10b9:1533
PCI fixup examining 10b9:5457
PCI fixup examining 168c:13
PCI fixup examining 1217:6972
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI fixup examining 104c:8026
PCI fixup examining 10b9:5229
PCI fixup examining 10b9:7101
PCI fixup examining 100b:20
PCI bus #2 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1002 0xcab0
10h mem 0xd4000000 0x04000000
14h mem 0xd0400000 0x00001000
18h port 0x00008090 0x00000004
[OK]
000:01:0 0x1002 0x700f
[OK]
000:02:0 0x10b9 0x5237
10h mem 0xd0014000 0x00001000
[OK]
000:06:0 0x10b9 0x5451
10h port 0x00008400 0x00000100
14h mem 0xd0015000 0x00001000
[OK]
000:07:0 0x10b9 0x1533
[OK]
000:08:0 0x10b9 0x5457
10h mem 0xd0016000 0x00001000
14h port 0x00008800 0x00000100
[OK]
000:09:0 0x168c 0x0013
10h mem 0xd0000000 0x00010000
[OK]
000:10:0 0x1217 0x6972
10h mem 0x00000000 0x00001000
[NG]
000:12:0 0x104c 0x8026
10h mem 0xd0017000 0x00000800
14h mem 0xd0010000 0x00004000
[OK]
000:16:0 0x10b9 0x5229
20h port 0x00008080 0x00000010
[OK]
000:17:0 0x10b9 0x7101
[OK]
000:18:0 0x100b 0x0020
10h port 0x00008c00 0x00000100
14h mem 0xd0018000 0x00001000
[OK]
001:05:0 0x1002 0x4336
10h mem 0xe0000000 0x10000000
14h port 0x00009000 0x00000100
18h mem 0xd0100000 0x00010000
[OK]
--------------------------[ 1 devices bogus]
Physical memory end: 0x1beec000
PCI memory mapped I/O space start: 0x1bf00000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1002 0xcab0
10h mem 0xd4000000 0x04000000
14h mem 0xd0400000 0x00001000
18h port 0x00008090 0x00000004
[OK]
000:01:0 0x1002 0x700f
[OK]
000:02:0 0x10b9 0x5237
10h mem 0xd0014000 0x00001000
[OK]
000:06:0 0x10b9 0x5451
10h port 0x00008400 0x00000100
14h mem 0xd0015000 0x00001000
[OK]
000:07:0 0x10b9 0x1533
[OK]
000:08:0 0x10b9 0x5457
10h mem 0xd0016000 0x00001000
14h port 0x00008800 0x00000100
[OK]
000:09:0 0x168c 0x0013
10h mem 0xd0000000 0x00010000
[OK]
000:10:0 0x1217 0x6972
10h mem 0x1bf00000 0x00001000
[OK]
000:12:0 0x104c 0x8026
10h mem 0xd0017000 0x00000800
14h mem 0xd0010000 0x00004000
[OK]
000:16:0 0x10b9 0x5229
20h port 0x00008080 0x00000010
[OK]
000:17:0 0x10b9 0x7101
[OK]
000:18:0 0x100b 0x0020
10h port 0x00008c00 0x00000100
14h mem 0xd0018000 0x00001000
[OK]
001:05:0 0x1002 0x4336
10h mem 0xe0000000 0x10000000
14h port 0x00009000 0x00000100
18h mem 0xd0100000 0x00010000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP2500+ (686-class), 1855.29 MHz, id 0x6a0
cpu0: features c3cbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c3cbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbf9ff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 512 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type `Processor` (0x0c) at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: using exception 16
PNP0800 [AT-style speaker sound] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (SYN0105): aux port
pckbc2: irq 12
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0A05 [Generic ACPI Bus] at acpi0 not configured
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
lpt3 at acpi0 (PNP0401)
lpt3: io 0x378-0x37f,0x778-0x77f irq 7 drq 0
com3 at acpi0 (PNP0501)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
HWPC209 at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: polling interval is 30.0s
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ATI Technologies product 0xcab0 (rev. 0x13)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: ATI Technologies product 0x700f (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: ATI Technologies Radeon IGP 320M (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ohci0 at pci0 dev 2 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci0: interrupting at irq 9
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
autri0 at pci0 dev 6 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x02)
autri0: interrupting at irq 5
autri0: ac97: CXT41 codec; reserved, headphone, 18 bit DAC, 18 bit ADC, no 3D stereo
audio0 at autri0: full duplex, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
Acer Labs product 0x5457 (modem communications) at pci0 dev 8 function 0 not configured
ath0 at pci0 dev 9 function 0
ath0: interrupting at irq 9
ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 802.11 address: [_MAC_XXXXXXXXXX]
cbb0 at pci0 dev 10 function 0: O2 Micro, Inc. OZ6912/OZ6972 PCI-Cardbus Bridge (rev. 0x00)
Texas Instruments TSB43AA21 OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10) at pci0 dev 12 function 0 not configured
aceride0 at pci0 dev 16 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
aceride0: bus-master DMA support present
aceride0: primary channel wired to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel wired to compatibility mode
aceride0: secondary channel interrupting at irq 15
atabus1 at aceride0 channel 1
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 17 function 0 not configured
sip0 at pci0 dev 18 function 0: NatSemi DP83815 10/100 Ethernet, rev 00
sip0: interrupting at irq 11
sip0: Ethernet address [_MAC_XXXXXXXXXX]
nsphyter0 at sip0 phy 0: DP83815 10/100 media interface, rev. 1
nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
isapnp0: no ISA Plug `n Play devices found
cbb0: interrupting at irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
WARNING: Callback scheduled before sysmon task queue thread present.
raidattach: Asked for 8 units
Kernelized RAIDframe activated
pcmcia0: CIS version PC Card Standard 5.0
pcmcia0: CIS info: NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA
pcmcia0: Manufacturer code 0xb, product 0x7300
pcmcia0: function 0: network adapter, ccr addr 3e0 mask 1
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
wi0 at pcmcia0 function 0: NETGEAR MA401RA Wireless PC, Card, ISL37300PEval-RevA
wi0: 802.11 address [_MAC_XXXXXXXXXX]
wi0: using RF:PRISM2.5 MAC:ISL3873B(PCMCIA)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
acpibat0: battery info: SMP, LION, 01KT, 0
wd0 at atabus0 drive 0: <TOSHIBA MK4021GAS>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R2312, X342416849, 1905> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(aceride0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b