Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-26 03:06:02
From: zith
Description: Athlon XP 1600+ (1.4GHz) 256Mb RAM DLink G520+ Atheros wireless
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Sat Jun 19 13:30:33 EST 2004
    [_EMAIL_XXXXXXXXXXX]:/usr/src/sys/i386/compile/HELIOS1
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0843000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08431f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 1600+ (1403.19-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 268369920 (255 MB)
avail memory = 251056128 (239 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdeb0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 10 INTA is routed to irq 10
pcib0: slot 12 INTA is routed to irq 10
pcib0: slot 17 INTD is routed to irq 5
pcib0: slot 17 INTD is routed to irq 5
pcib0: slot 17 INTD is routed to irq 5
pcib0: slot 17 INTC is routed to irq 10
agp0: <VIA Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
dc0: <Intel 21143 10/100BaseTX> port 0xd000-0xd07f mem 0xef010000-0xef0103ff irq 10 at device 10.0 on pci0
dc0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on dc0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ath0: <Atheros 5212> mem 0xef000000-0xef00ffff irq 10 at device 12.0 on pci0
ath0: mac 5.9 phy 4.3 5ghz radio 4.6
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 802.11 address: [_MAC_XXXXXXXXXX]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 UDMA100 controller> port 0xd400-0xd40f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 5 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 5 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 5 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcm0: <VIA VT8233> port 0xe400-0xe4ff irq 10 at device 17.5 on pci0
pcm0: <Avance Logic ALC200 AC97 Codec>
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1403189203 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
GEOM: create disk ad0 dp=0xc2dabb60
ad0: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-master UDMA100
GEOM: create disk ad1 dp=0xc2dab960
ad1: 78533MB <IC35L080AVVA07-0> [159560/16/63] at ata0-slave UDMA100
ata1-slave: FAILURE - SETFEATURES SET TRANSFER MODE no interrupt
acd0: DVDROM <LITEON DVD-ROM LTD163> at ata1-master PIO4
acd1: CDRW <LITE-ON LTR-32123S> at ata1-slave BIOSPIO
Mounting root from ufs:/dev/ad0s1a