Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-26 05:17:52
From: Kefren
Description: Dual Pentium Pro - Compaq Proliant 2500
NetBSD 2.0_BETA (Kefren.MAMMUT.MP) #8: Fri Jun 11 19:06:05 EEST 2004 [_EMAIL_XXXXXXX]:/sys/arch/i386/compile/Kefren.MAMMUT.MP total memory = 511 MB avail memory = 497 MB BIOS32 rev. 0 found at 0xf0000 mainbus0 (root) mainbus0: Intel MP Specification (Version 1.4) (COMPAQ PROLIANT ) cpu0 at mainbus0: apid 1 (boot processor) cpu0: Intel Pentium Pro (686-class), 199.47 MHz, id 0x619 cpu0: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0: features fbff<PGE,MCA,CMOV> cpu0: I-cache 8 KB 32b/line 4-way, D-cache 8 KB 32b/line 2-way cpu0: L2 cache 512 KB 32b/line 4-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: calibrating local timer cpu0: apic clock running at 66 MHz cpu0: 32 page colors cpu1 at mainbus0: apid 0 (application processor) cpu1: starting cpu1: Intel Pentium Pro (686-class), 199.45 MHz, id 0x619 cpu1: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu1: features fbff<PGE,MCA,CMOV> cpu1: I-cache 8 KB 32b/line 4-way, D-cache 8 KB 32b/line 2-way cpu1: L2 cache 512 KB 32b/line 4-way cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way mpbios: bus 0 is type PCI mpbios: bus 1 is type PCI mpbios: bus 9 is type EISA ioapic0 at mainbus0 apid 2 (I/O APIC) ioapic0: pa 0xfec00000, version 11, 28 pins pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82441FX PCI and Memory Controller (PMC) (rev. 0x02) ppb0 at pci0 dev 13 function 0: IBM 82351 PCI-PCI Bridge (rev. 0x01) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok Cirrus Logic CL-GD5430 (VGA display, revision 0x22) at pci1 dev 6 function 0 not configured tl0 at pci1 dev 7 function 0 tl0: Compaq ProLiant Integrated Netelligent 10/100 TX tl0: Ethernet address [_MAC_XXXXXXXXXX] tl0: interrupting at ioapic0 pin 17 (irq 10) nsphy0 at tl0 phy 1: DP83840 10/100 media interface, rev. 1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tlphy0 at tl0 phy 31: ThunderLAN 10BASE-T media interface, rev. 5 tlphy0: 10base2 esiop0 at pci1 dev 9 function 0: Symbios Logic 53c875 (ultra-wide scsi) esiop0: using on-board RAM esiop0: interrupting at ioapic0 pin 16 (irq 15) scsibus0 at esiop0: 16 targets, 8 luns per target vga1 at pci1 dev 11 function 0: Texas Instruments TVP4020 Permedia 2 (rev. 0x01) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 ex0 at pci1 dev 13 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x74) ex0: interrupting at ioapic0 pin 21 (irq 11) ex0: MAC address [_MAC_XXXXXXXXXX] bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 6 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ppb1 at pci0 dev 18 function 0: IBM 82351 PCI-PCI Bridge (rev. 0x07) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok cac0 at pci2 dev 0 function 0: Compaq SMART-2SL cac0: interrupting at ioapic0 pin 18 (irq 15) ld0 at cac0 unit 0: standalone disk or RAID0 array ld0: 43385 MB, 5530 cyl, 255 head, 63 sec, 512 bytes/sect x 88854240 sectors pceb0 at pci0 dev 20 function 0 pceb0: Compaq PCI-EISA Bridge (rev. 0x07) eisa0 at pceb0 eisa0: can`t map I/O space for slot 6 isa0 at pceb0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 wdc0 at isa0 port 0x1f0-0x1f7 irq 14 atabus0 at wdc0 channel 0 pcppi0 at isa0 port 0x61 sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: read port 0x203 isapnp0: <CMI8330. Audio Adapter, @@@0001, , > port 0x530/8,0x388/8 irq 5 drq 0 not configured isapnp0: <CMI8330. Audio Adapter, @H@0001, , > port 0x330/2 irq 9 not configured isapnp0: <CMI8330. Audio Adapter, @P@0001, , > port 0x200/8 not configured sb0 at isapnp0 port 0x220/16 irq 5 drq 1,5 sb0: CMI8330. Audio Adapter : dsp v4.13 audio0 at sb0: full duplex, mmap, independent midi0 at sb0: SB MIDI UART opl0 at sb0: model OPL3 midi1 at opl0: SB Yamaha OPL3 ioapic0: enabling fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec scsibus0: waiting 2 seconds for devices to settle... atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 0: <CD-ROM CDU571-Q, , 1.1a> cdrom removable cd0: drive supports PIO mode 3, DMA mode 2 boot device: ld0 root on ld0a dumps on ld0b root file system type: ffs cpu1: CPU 0 running wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) wsdisplay0: screen 5 added (80x25, vt100 emulation) wsdisplay0: screen 6 added (80x25, vt100 emulation) wsdisplay0: screen 7 added (80x25, vt100 emulation)