Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-26 20:35:15
From: MattD
Description: Bog standard i386 Athlon XP 2000, Via KT333, 512M RAM, Radeon 9000 etc.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #0: Sat Jun 12 01:24:15 BST 2004
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/WORKSTATION1
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08c7000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc08c71f4.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc08c72a4.
Preloaded splash_image_data "/boot/boot.bmp" at 0xc08c7350.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc08c739c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08c7448.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2000+ (1672.38-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 511758336 (488 MB)
Pentium Pro MTRR support enabled
VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc083bb42 (1000022)
VESA: ATI RADEON RV250
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <KT333  AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdf10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 9 INTA is routed to irq 11
pcib0: slot 10 INTA is routed to irq 11
pcib0: slot 11 INTA is routed to irq 10
pcib0: slot 11 INTA is routed to irq 10
pcib0: slot 16 INTA is routed to irq 10
pcib0: slot 16 INTB is routed to irq 11
pcib0: slot 16 INTC is routed to irq 11
pcib0: slot 16 INTD is routed to irq 10
agp0: <VIA Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 10
pcib1: slot 0 INTA is routed to irq 10
drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem 0xed000000-0xed00ffff,0xe0000000-0xe7ffffff irq 10 at device 0.0 on pci1
info: [drm] AGP at 0xe8000000 64MB
info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
pcm0: <Creative EMU10K1> port 0xd000-0xd01f irq 11 at device 9.0 on pci0
pcm0: <eMicro EM28028 AC97 Codec>
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xef000000-0xef00007f irq 11 at device 10.0 on pci0
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0: <BrookTree 878> mem 0xef001000-0xef001fff irq 10 at device 11.0 on pci0
bktr0: Card has no configuration EEPROM. Cannot determine card make.
bktr0: Pinnacle/Miro TV, Philips PAL tuner.
pci0: <multimedia> at device 11.1 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 10 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 11 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xef003000-0xef0030ff irq 10 at device 16.3 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: (0x1106) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xe800-0xe80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1672375275 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc481cb60
ad0: 58644MB <Maxtor 6Y060L0> [119150/16/63] at ata0-master UDMA133
acd0: DVDR <_NEC DVD_RW ND-2500A> at ata1-master UDMA33
acd1: DVDROM <SAMSUNG DVD-ROM SD-608> at ata1-slave WDMA2
uhub0: port error, restarting port 1
ugen0: Logitech Camera, rev 1.00/1.00, addr 2
GEOM: create disk cd0 dp=0xc47db600
GEOM: create disk cd1 dp=0xc47d7e00
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-2500A 1.07> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <SAMSUNG DVD-ROM SD-608 BT01> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s1a
info: [drm] Loading R200 Microcode
drm0: [MPSAFE]