Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-27 00:28:22
From: rpratt
Description: SOYO KT400 W/ AMD Athlon(tm) XP 2400+ Matrox MGA G400 AGP graphics
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #0: Sat Jun  5 15:39:24 EDT 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/CUSTOM
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) XP 2400+ (2000.08-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536805376 (524224K bytes)
avail memory = 516714496 (504604K bytes)
Preloaded elf kernel "kernel" at 0xc0573000.
Preloaded elf module "snd_cmi.ko" at 0xc057309c.
Preloaded elf module "snd_pcm.ko" at 0xc057313c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdea0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 o
n pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b168)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xc000-0xc01f irq 5 at device 9.0
 on pci0
ed0: address xx:xx:xx:xx:xx:xx, type NE2000 (16 bit) 
pcm0: <CMedia CMI8738> port 0xc400-0xc4ff irq 11 at device 14.0 on pci0
pci0: <HighPoint HPT366 ATA controller> at 15.0 irq 10
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 11 at device 16.0 on p
ci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Generic USB Storage Device, rev 1.10/1.00, addr 2
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 5 at device 16.1 on pc
i0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device 16.2 on p
ci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 16.3 irq 11
isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 ATA133 controller> port 0xe800-0xe80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xec00-0xecff mem 0xe9021000-0xe902
10ff irq 11 at device 18.0 on pci0
vr0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata0-master UDMA133
ad2: 58644MB <Maxtor 6Y060L0> [119150/16/63] at ata1-master UDMA133
acd0: DVD-ROM <SAMSUNG DVD-ROM SD-816B> at ata0-slave PIO4
acd1: CD-RW <LITE-ON LTR-52246S> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
cd0 at ata0 bus 0 target 1 lun 0
cd0: <SAMSUNG DVD-ROM SD-816B H000> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: cd present [193952 x 2048 byte records]
cd1 at ata1 bus 0 target 1 lun 0
cd1: <LITE-ON LTR-52246S 6S0D> Removable CD-ROM SCSI-0 device 
cd1: 16.000MB/s transfers
cd1: cd present [1 x 2048 byte records]
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB Storage-SMC 0207> Removable Direct Access SCSI-0 device 
da0: 650KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present