Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-27 02:42:25
From: marcus
Description: Pentium III 1 GHz with 2 GB of RAM (Generic machine). This is a file and application server with an Adaptec 5400S RAID controller. This machine uses a server motherboard, and boots entirely to a serial console.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #20: Thu Jun 10 20:45:14 EDT 2004
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 999724504 Hz
CPU: Intel Pentium III (999.72-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
real memory  = 2147418112 (2097088K bytes)
avail memory = 2088075264 (2039136K bytes)
Preloaded elf kernel "kernel" at 0xc035b000.
Preloaded elf module "aac.ko" at 0xc035b09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 268435454 entries at 0xc00fdf10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GV graphics accelerator> at 2.0 irq 11
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x5400-0x543f mem 0xfb100000-0xfb1fffff,0xfb005000-0xfb005fff irq 10 at device 3.0 on pci0
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x104c, dev=0x8024) at 8.0 irq 12
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> at 15.1
ohci0: <OHCI (generic) USB controller> mem 0xfb006000-0xfb006fff irq 9 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x5800-0x58ff mem 0xfd002000-0xfd002fff irq 9 at device 4.0 on pci1
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x6000-0x60ff mem 0xfd003000-0xfd003fff irq 9 at device 4.1 on pci1
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
aac0: <Adaptec SCSI RAID 5400S> port 0x6400-0x64ff mem 0xfd000000-0xfd001fff irq 5 at device 11.0 on pci1
aac0: StrongARM SA110 233MHz, 128MB cache memory, required battery present
aac0: Kernel 1.0-0, Build 5262, S/N 6b2b8a
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcf7ff,0xcf800-0xd37ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A, console
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
Waiting 8 seconds for SCSI devices to settle
aacd0: <RAID 0 (Stripe)> on aac0
aacd0: 401375MB (822017792 sectors)
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabledda0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DDRS-39130W S97B> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabledda1: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)