Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-27 03:39:48
From: bhu73
Description: Tyan S1854 mobo which supports either a PPGA-370 Celeron or a slot I Pentium. Promise ATA-100 controller and vinum and a qlogic with an HP DLT 4000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #0: Sat May 29 00:24:06 CEST 2004
    xxx@xxx.xxx:/usr/obj/web1/src/sys/MARK
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Pentium III (651.48-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536870912 (524288K bytes)
avail memory = 519065600 (506900K bytes)
Preloaded elf kernel "kernel" at 0xc0344000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdd60
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI Mach64-GZ graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xa000-0xa00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 7.2 irq 10
pci0: <unknown card> (vendor=0x1106, dev=0x3050) at 7.3
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xa800-0xa83f irq 5 at device 15.0 on pci0
xl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0xac00-0xac7f mem 0xd8020000-0xd802007f irq 11 at device 16.0 on pci0
xl1: Ethernet address: xx:xx:xx:xx:xx:xx
miibus1: <MII bus> on xl1
xlphy0: <3Com internal media interface> on miibus1
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise ATA100 controller> port 0xc000-0xc03f,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 mem 0xd8000000-0xd801ffff irq 5 at device 17.0 on pci0
ata2: at 0xb000 on atapci1
ata3: at 0xb800 on atapci1
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0xc400-0xc4ff mem 0xd8021000-0xd8021fff irq 10 at device 19.0 on pci0
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcdfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited
ad0: 6149MB <QUANTUM FIREBALL SE6.4A> [13328/15/63] at ata0-master UDMA33
ad4: 38166MB <ST340823A> [77545/16/63] at ata2-master UDMA100
ad6: 38166MB <ST340823A> [77545/16/63] at ata3-master UDMA100
acd0: CDROM <Compaq CRD-8484B> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at isp0 bus 0 target 5 lun 0
sa0: <Quantum DLT4000 D069> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
Mounting root from ufs:/dev/ad0s1a