Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-27 03:50:17
From: freeman
Description: Twinhead notebook efio!1000 CPU: celeron 650E RAM: 192MB HD: 20M
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a5e000.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc0a5e1f4.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0a5e2a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a5e354.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (646.83-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 201261056 (191 MB)
avail memory = 185843712 (177 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdf60
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node 0xc26b43c0), AE_AML_NO_RETURN_VALUE
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node 0xc26b43c0), AE_AML_NO_RETURN_VALUE
can`t fetch resources for \_SB_.PCI0 - AE_AML_NO_RETURN_VALUE
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.ISA_.MOTH.MEM_._CRS] (Node 0xc152a980), AE_AML_NO_RETURN_VALUE
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.ISA_.MOTH.MEM_._CRS] (Node 0xc152a980), AE_AML_NO_RETURN_VALUE
can`t fetch resources for \_SB_.PCI0.ISA_.MOTH.MEM_ - AE_AML_NO_RETURN_VALUE
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 0 INTB is routed to irq 11
pcib0: slot 2 INTA is routed to irq 5
pcib0: slot 6 INTA is routed to irq 11
pcib0: slot 7 INTD is routed to irq 11
pcib0: slot 9 INTA is routed to irq 5
pci0: <old, non-VGA display device> at device 0.1 (no driver attached)
pci0: <simple comms> at device 0.2 (no driver attached)
pci0: <display, VGA> at device 2.0 (no driver attached)
cbb0: <TI1410 PCI-CardBus Bridge> at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 3 INTA is routed to irq 9
cbb0: [MPSAFE]
pcm0: <ESS Technology Allegro-1> port 0x1400-0x14ff irq 11 at device 6.0 on pci0pcm0: failed to enable memory mapping!
pcm0: <ESS Technology ES1988 AC97 Codec>
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1ca0-0x1caf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82443MX USB controller> port 0x1c80-0x1c9f irq 11 at device 7.2 on pci0
usb0: <Intel 82443MX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Philips Semiconductors hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 4 ports with 4 removable, self powered
ums0: vendor 0x062a product 0x0000, rev 1.10/0.00, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
dc0: <ADMtek AN985 10/100BaseTX> port 0x1800-0x18ff mem 0xfec20000-0xfec203ff irq 5 at device 9.0 on pci0
dc0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 646827444 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
GEOM: create disk ad0 dp=0xc2709a60
ad0: 19077MB <IC25N020ATCS04-0> [38760/16/63] at ata0-master UDMA33
acd0: CDROM <MATSHITA CR-177> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s3a