Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-27 04:38:04
From: jamie
Description: AMD Athlon XP 2100, freebsd 5.2.1 - acpi currently not working, so disabled. nvidia graphics card
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Fri Apr 16 21:11:33 BST 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/THOMPSON
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0941000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0941244.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc09412f0.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2100+ (1734.09-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 511770624 (488 MB)
netsmb_dev: loaded
Pentium Pro MTRR support enabled
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc06ed1e2 (1000022)
VESA: NVidia
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdef0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:8 INTA BIOS irq 10
pci_cfgintr: 0:9 INTA BIOS irq 11
pci_cfgintr: 0:15 INTA BIOS irq 5
pci_cfgintr: 0:15 INTA BIOS irq 5
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <RIVA TNT> mem 0xe6000000-0xe6ffffff,0xe4000000-0xe4ffffff irq 11 at device 0.0 on pci1
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xe7000000-0xe70000ff irq 10 at device 8.0 on pci0
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <multimedia, audio> at device 9.0 (no driver attached)
pci0: <input device> at device 9.1 (no driver attached)
bktr0: <BrookTree 878> mem 0xe7001000-0xe7001fff irq 5 at device 15.0 on pci0
bktr0: Card has no configuration EEPROM. Cannot determine card make.
bktr0: Pinnacle/Miro TV, <no> tuner.
pci0: <multimedia> at device 15.1 (no driver attached)
viapropm0: SMBus I/O base at 0x5000
viapropm0: <VIA VT8233 Power Management Unit> port 0x5000-0x500f at device 17.0 on pci0
viapropm0: SMBus revision code 0x0
smbus0: <System Management Bus> on viapropm0
smb0: <SMBus generic I/O> on smbus0
atapci0: <VIA 8233A UDMA133 controller> port 0xdc00-0xdc0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 10 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Samsung Electronics Sam Sung Electronics, rev 1.10/2.00, addr 2
uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
isa0: <ISA bus> on motherboard
orm0: <Option ROM> at iomem 0xc0000-0xc87ff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x44 irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0303> can`t assign resources (port)
speaker0: <PC speaker> at port 0x61 on isa0
unknown: <PNP0f13> can`t assign resources (irq)
unknown: <PNP0c02> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
unknown: <PNP0700> can`t assign resources (port)
unknown: <PNP0401> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
Timecounter "TSC" frequency 1734091826 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc48b8b60
ad0: 76345MB <MAXTOR 6L080J4> [155114/16/63] at ata0-master UDMA133
GEOM: create disk ad1 dp=0xc48b8a60
ad1: 58644MB <Maxtor 5T060H6> [119150/16/63] at ata0-slave UDMA100
acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-116 0109> at ata1-master UDMA66
Mounting root from ufs:/dev/ad0s3a